It appears to be a "bug" in old system. Am seeing a lot of repeats on upgrades (only enter once please as it only confuses me !) In time it will all be fixed as David has tim to work on it. Have been

Someone running less than 5 watts. If you work me, ask and I'll reduce power. Jerry n9avy

Think it all started with comment that many were returning to PSK because that mode which shall not be named was boring. Jerry n9avy

Karl: Congrats on the 366 !!!! It's much harder to accomplish today than it was a few years ago with fewer PSK stations on the air and propagation being in the dumps. So, anyone who make it today gets

Pretty sure that K1JT is boring egomaniac . His FT modes will go down as one of the worst things to happen to Amateur Radio. Statistics may prove that more FT operators died from boredom. :-) Jerry

Bob: No problem, it just made me stumble over that sentence. Missteaks happen . Jerry n9avy

Good advice John ! Usually try to be helpful for new and old guys alike. One thing I learned when finding an overdriven signal is to first turn off the AGC and insert about 18 db of attenuation. This

Bob: Have run into a few over past few months who were returning from other modes because hey enjoyed ragchewing and the friendlier QSOs on PSK. "unsubstantial QSO" ??? Did you mean it without the "un

Try reloading MixW. You may have had a glitch. Jerry n9avy

Phil: Started out with Digipan in 2000 -older than the hills... moved to a couple others and tried HRD 4 or 5 (before the author in Switzerland sold it to U.S. firm). Finally settled on MixW2 and move

Phil: Been using MixW 3.2 for a year or two. It's very stable and I love it. Not sure why you're having problems with down load. Hope some one can address that isue. Jerry N9AVY

Can't climb tower - doctor's orders. About every year or so I disassemble tower mounted remove coax switch (it's down low) and burnish the open frame relay contacts. Ameritron 5-position. Only problem

Rick: Turned everything off for a couple hours and then all was okay again. Probably need to check coax connectors as you suggested. All affected antennas are on tower and fed into a remote switch on

This morning I turned on rig (FT-1000MP) and hit the antenna turner button to make sure antenna was working. It shut down antenna tuner and said "high SWR" . Tried other antennas and had same results.

Jay: I agree being a bit lazy myself. I retired in Nov. 2019 and my attitude has been changed since then. Like your way of doing things. 73, Jerry n9avy

You can add comments on the fly with MixW, but you have to pick a spot just above where you want you comment and hit " ENTER", but you have to be fast or MixW will ignore it. If cursor hits Blank Line

Finally got him ! Jerry n9avy

Never saw KB3RAN, but saw others. This morning was strange with temps in low 50's (more like Sept./Oct.) and my normal S-7+ noise level was S-0 . Antenna is still connected. Maybe local noise generato

PSK63 ??? Al;ways thought only PSK31 QSOs were counted . Am I mistaken ??? Jerry N9AVY

Received certificate from ARRL back in 2015 for WAS, but today my mailbox yielded 5 gold stickers to add to certificate (10/15/20/40/80m). Many of those contacts were PSK31 which I've worked over the