Date   

Re: Signalink USB

Jerry N9AVY
 

Steve:

Seems like many ops are Signalink USB these days. Judging from comments received (brag lists) over the air. Signalink has sold thousands (millions?) of units. I switch from West Mountain interface a few years ago and opted for the Signalink.  

Since it has built-in sound card, you are freeing up computer from extra work and as we all should know, "not all sound cards are alike".

Jerry  n9avy





On Saturday, December 26, 2020, 12:31:33 PM CST, Stephen Melachrinos via groups.io <melachri@...> wrote:


I made a comment in my "goals" for 2021 that I was looking to upgrade my computer-radio interface for portable operations. Intent is to simplify the setup by reducing the cabling, and retire a 20-year-old Rascal and its associated USB-serial converter. Radios to be addressed are both Yaesus (817 and 857)--not looking for a new radio. At the moment, I'm only interested in basic digital modes, e.g. I don't need a quadrature output on the stereo pins. I'm also interested in portability, so desktop-type solutions (e.g., large boxes) would not be preferred.

One of the options I was considering was the Signalink USB. Does anyone have any comments on this? I've seen some reviews that are critical, but I'm not sure their concerns are relevant. 

How about anything else? What have I missed?

Thanks.

73,
Steve
W3HF





Re: Signalink USB

KC9SEB / 070: #1579 / 10:10: #76773 / EPC: 19755
 

Would highly recommend it; I used it along with an FT450D for the longest time. I switched to an IC-7300 about a year ago and no longer needed it and sold it on (still second guessing on that decision). I also did a modification to add a 100K resistor in place of the mic "jumper" as described here - https://wd8rif.com/radio_manuals/pdf/TigerTronics-Cables-Rev22.pdf to alleviate the issue @K5SP mentions around the "quirky" TX Pot.....

73 de Paul @KC9SEB


Re: Christmas run

Ken Campbell <n6pcd1@...>
 

I did attach the file!!!
--
All the best,
Ken N6PCD/0
070 #801
LONP #187


Re: Signalink USB

JEFF WALSH
 

Steve 
Been using a Signalink for years with no problems. 
Jeff 
W3WMU 


On Dec 26, 2020, at 1:10 PM, KB1NAL via groups.io <kb1nal@...> wrote:


  I've been using a SignaLink USB for the past 10 plus yrs, without any issues.
Use it for all my digital modes on VHF and HF..  I'ts interfaced with an IC-746PRO
and an old HP Pavilion running WIN 10 OS.  Greatly designed and   built
device.  You will NOT be disappointed..


73 de Lee KB1NAL


Re: Signalink USB

David, K9DWR
 

* Stephen Melachrinos via groups.io <melachri=verizon.net@groups.io> [2020-12-26 18:31]:
One of the options I was considering was the Signalink USB. Does anyone have
any comments on this? I've seen some reviews that are critical, but I'm not
sure their concerns are relevant.  How about anything else? What have I
missed?
I've had my SignaLink for about 7 years now and have never had an issue with
it. They aren't cheap, but they are solid. The main thing I've seen in my
setup was needing to choke the USB cable to avoid RFI. I've only used it with
Kenwood radios, and needed to jumper the gain up for one of the radios (the
TS-440), but that's all documented and easy to do.

I have no problem recommending one.

--
David, K9DWR
#1604 LONP #255
david@graniteweb.com


Re: Signalink USB

KB1NAL
 

  I've been using a SignaLink USB for the past 10 plus yrs, without any issues.
Use it for all my digital modes on VHF and HF..  I'ts interfaced with an IC-746PRO
and an old HP Pavilion running WIN 10 OS.  Greatly designed and   built
device.  You will NOT be disappointed..


73 de Lee KB1NAL


Re: Welcome 2813

Loren McCullough - WA3WZR
 

excellent!  Welcome Tony.  He was one of my contacts during the Christmas run and I gave him info about the club.

Loren WA3WZR


Re: Signalink USB

Fr Richard R
 

I like me signalink. 
Simple easy to use. 

Wb8yxf 
Fr Richard 

On Sat, Dec 26, 2020 at 13:58, Alex Vincer
<acvincer@...> wrote:
Steve W3HF, 

I have a Signalink USB and I love it. I couldn’t get it working for a while because I had not read the jumper instructions carefully enough and had the jumpers in the wrong position for the Data port on my Yaesu FT-450D. Once I figured that out everything has worked great.

Good luck and 73,

Alex KD9MGA

On Sat, Dec 26, 2020 at 12:43 PM Alan Sorum WL7CG <asorum@...> wrote:

Steve,

I have two of them, one on my FT-950 at home and the other with a FT-891 I use for portable ops. Never have had any issues with them, they always works as needed. I see them for sale on QRZ from time to time. Good luck.

73 Alan WL7CG

On 12/26/20 9:31 AM, Stephen Melachrinos via groups.io wrote:
I made a comment in my "goals" for 2021 that I was looking to upgrade my computer-radio interface for portable operations. Intent is to simplify the setup by reducing the cabling, and retire a 20-year-old Rascal and its associated USB-serial converter. Radios to be addressed are both Yaesus (817 and 857)--not looking for a new radio. At the moment, I'm only interested in basic digital modes, e.g. I don't need a quadrature output on the stereo pins. I'm also interested in portability, so desktop-type solutions (e.g., large boxes) would not be preferred.

One of the options I was considering was the Signalink USB. Does anyone have any comments on this? I've seen some reviews that are critical, but I'm not sure their concerns are relevant. 

How about anything else? What have I missed?

Thanks.

73,
Steve
W3HF





--
The Grid and Prefix Awards Program - GAPA
http://gapaawards.com https://groups.io/g/GAPA 

--


Alex Vincer
acvincer@...


Re: Christmas Run 2020 - "Operating Event"

Scotty W7PSK
 

I got started late due to family.  Got 5 contacts but they were all great conversations.

Even got milt like he was next door.


Scotty W7PSK


On 12/26/2020 10:17, Bob Motyl KK6KMU wrote:
Thank you too everyone who had their hand into this one day event.  I have tried to get twenty five contacts before but never made it.  Made it this time.  Hope this is a trend of good things to come.
Thanks to Steve for volunteering too compile the results.  Merry Christmas and A Happy New Year to all.

Bob KK6KMU

--
Scotty W7PSK
Everett, Washington
070 #138


Re: Signalink USB

Alex Vincer
 

Steve W3HF, 

I have a Signalink USB and I love it. I couldn’t get it working for a while because I had not read the jumper instructions carefully enough and had the jumpers in the wrong position for the Data port on my Yaesu FT-450D. Once I figured that out everything has worked great.

Good luck and 73,

Alex KD9MGA

On Sat, Dec 26, 2020 at 12:43 PM Alan Sorum WL7CG <asorum@...> wrote:

Steve,

I have two of them, one on my FT-950 at home and the other with a FT-891 I use for portable ops. Never have had any issues with them, they always works as needed. I see them for sale on QRZ from time to time. Good luck.

73 Alan WL7CG

On 12/26/20 9:31 AM, Stephen Melachrinos via groups.io wrote:
I made a comment in my "goals" for 2021 that I was looking to upgrade my computer-radio interface for portable operations. Intent is to simplify the setup by reducing the cabling, and retire a 20-year-old Rascal and its associated USB-serial converter. Radios to be addressed are both Yaesus (817 and 857)--not looking for a new radio. At the moment, I'm only interested in basic digital modes, e.g. I don't need a quadrature output on the stereo pins. I'm also interested in portability, so desktop-type solutions (e.g., large boxes) would not be preferred.

One of the options I was considering was the Signalink USB. Does anyone have any comments on this? I've seen some reviews that are critical, but I'm not sure their concerns are relevant. 

How about anything else? What have I missed?

Thanks.

73,
Steve
W3HF





--
The Grid and Prefix Awards Program - GAPA
http://gapaawards.com https://groups.io/g/GAPA 

--


Alex Vincer
acvincer@...


Re: Signalink USB

Scotty W7PSK
 

Wish I had not got rid of my Signalink :(.


On 12/26/2020 10:42, Jim K5SP wrote:
I started out with a Rigblaster. Too many cables, so a few years ago ordered the Signalink USB, have not had a problem with it at all, and if this one ever quits will be getting another one. 

The TX level pot is sometimes a little quirky, but i rarely ever have to touch it 

Jim K5SP 

On Dec 26, 2020 12:31 PM, "Stephen Melachrinos via groups.io" <melachri@...> wrote:
I made a comment in my "goals" for 2021 that I was looking to upgrade my computer-radio interface for portable operations. Intent is to simplify the setup by reducing the cabling, and retire a 20-year-old Rascal and its associated USB-serial converter. Radios to be addressed are both Yaesus (817 and 857)--not looking for a new radio. At the moment, I'm only interested in basic digital modes, e.g. I don't need a quadrature output on the stereo pins. I'm also interested in portability, so desktop-type solutions (e.g., large boxes) would not be preferred.

One of the options I was considering was the Signalink USB. Does anyone have any comments on this? I've seen some reviews that are critical, but I'm not sure their concerns are relevant. 

How about anything else? What have I missed?

Thanks.

73,
Steve
W3HF






--
Jim,  K5SP #483
Executive Director/Member Services Director

--
Scotty W7PSK
Everett, Washington
070 #138


Re: Signalink USB

Alan Sorum WL7CG
 

Steve,

I have two of them, one on my FT-950 at home and the other with a FT-891 I use for portable ops. Never have had any issues with them, they always works as needed. I see them for sale on QRZ from time to time. Good luck.

73 Alan WL7CG

On 12/26/20 9:31 AM, Stephen Melachrinos via groups.io wrote:
I made a comment in my "goals" for 2021 that I was looking to upgrade my computer-radio interface for portable operations. Intent is to simplify the setup by reducing the cabling, and retire a 20-year-old Rascal and its associated USB-serial converter. Radios to be addressed are both Yaesus (817 and 857)--not looking for a new radio. At the moment, I'm only interested in basic digital modes, e.g. I don't need a quadrature output on the stereo pins. I'm also interested in portability, so desktop-type solutions (e.g., large boxes) would not be preferred.

One of the options I was considering was the Signalink USB. Does anyone have any comments on this? I've seen some reviews that are critical, but I'm not sure their concerns are relevant. 

How about anything else? What have I missed?

Thanks.

73,
Steve
W3HF





--
The Grid and Prefix Awards Program - GAPA
http://gapaawards.com https://groups.io/g/GAPA 


Re: Signalink USB

Jim K5SP
 

I started out with a Rigblaster. Too many cables, so a few years ago ordered the Signalink USB, have not had a problem with it at all, and if this one ever quits will be getting another one. 

The TX level pot is sometimes a little quirky, but i rarely ever have to touch it 

Jim K5SP 

On Dec 26, 2020 12:31 PM, "Stephen Melachrinos via groups.io" <melachri@...> wrote:
I made a comment in my "goals" for 2021 that I was looking to upgrade my computer-radio interface for portable operations. Intent is to simplify the setup by reducing the cabling, and retire a 20-year-old Rascal and its associated USB-serial converter. Radios to be addressed are both Yaesus (817 and 857)--not looking for a new radio. At the moment, I'm only interested in basic digital modes, e.g. I don't need a quadrature output on the stereo pins. I'm also interested in portability, so desktop-type solutions (e.g., large boxes) would not be preferred.

One of the options I was considering was the Signalink USB. Does anyone have any comments on this? I've seen some reviews that are critical, but I'm not sure their concerns are relevant. 

How about anything else? What have I missed?

Thanks.

73,
Steve
W3HF






--
Jim,  K5SP #483
Executive Director/Member Services Director


Signalink USB

Stephen Melachrinos
 

I made a comment in my "goals" for 2021 that I was looking to upgrade my computer-radio interface for portable operations. Intent is to simplify the setup by reducing the cabling, and retire a 20-year-old Rascal and its associated USB-serial converter. Radios to be addressed are both Yaesus (817 and 857)--not looking for a new radio. At the moment, I'm only interested in basic digital modes, e.g. I don't need a quadrature output on the stereo pins. I'm also interested in portability, so desktop-type solutions (e.g., large boxes) would not be preferred.

One of the options I was considering was the Signalink USB. Does anyone have any comments on this? I've seen some reviews that are critical, but I'm not sure their concerns are relevant. 

How about anything else? What have I missed?

Thanks.

73,
Steve
W3HF





Re: Christmas Run 2020 - "Operating Event"

Bob Motyl KK6KMU
 

Thank you too everyone who had their hand into this one day event.  I have tried to get twenty five contacts before but never made it.  Made it this time.  Hope this is a trend of good things to come.
Thanks to Steve for volunteering too compile the results.  Merry Christmas and A Happy New Year to all.

Bob KK6KMU


Re: LotW and the year end

Ken Campbell <n6pcd1@...>
 

Milt,

I am in total agreement with you. Well said! And if one uses a well written logging program such as N3FJP’s AC Log, uploading to LoTW is extremely easy, and can even done automatically.
--
All the best,
Ken N6PCD/0
070 #801
LONP #187


Re: Christmas run

Jerry N9AVY
 

Steve:

We all knew what you meant !  Hi ! Hi !

Jerry  n9avy

P.S.  Got LoTW confirmations from `1979-1980 from 10m SSB contacts . Arrived on LoTW today.  Patience grasshoppers !  Emoji

On Saturday, December 26, 2020, 08:48:16 AM CST, Stephen Melachrinos via groups.io <melachri@...> wrote:


Note to all:

I said that wrong. What I should have said was 

"Don't forget to send your logs in.

Please follow the instructions on the listed web page to facilitate manual review.

Email logs to me directly (not to the endorsement checker) at w3hf@...."

Thanks.

Steve
W3HF


-----Original Message-----
From: Stephen Melachrinos via groups.io <melachri@...>
To: main@070Club.groups.io <main@070Club.groups.io>
Sent: Sat, Dec 26, 2020 2:21 pm
Subject: Re: [070Club] Christmas run

Ken -

Good job, but you need to send the log. Did you forget the attachment?

Please note the instructions on the web page.


Steve


-----Original Message-----
From: Ken Campbell <n6pcd1@...>
To: main@070Club.groups.io
Sent: Sat, Dec 26, 2020 9:08 am
Subject: Re: [070Club] Christmas run

Yeah, it was a good time, that’s for sure. Much to my astonishment I managed to log 36 contacts! Hopefully there will be a lot more activity on PSK-31 from here on out!
--
All the best,
Ken N6PCD/0
070 #801
LONP #187


Re: Christmas run

Stephen Melachrinos
 

Note to all:

I said that wrong. What I should have said was 

"Don't forget to send your logs in.

Please follow the instructions on the listed web page to facilitate manual review.

Email logs to me directly (not to the endorsement checker) at w3hf@...."

Thanks.

Steve
W3HF


-----Original Message-----
From: Stephen Melachrinos via groups.io <melachri@...>
To: main@070Club.groups.io <main@070Club.groups.io>
Sent: Sat, Dec 26, 2020 2:21 pm
Subject: Re: [070Club] Christmas run

Ken -

Good job, but you need to send the log. Did you forget the attachment?

Please note the instructions on the web page.


Steve


-----Original Message-----
From: Ken Campbell <n6pcd1@...>
To: main@070Club.groups.io
Sent: Sat, Dec 26, 2020 9:08 am
Subject: Re: [070Club] Christmas run

Yeah, it was a good time, that’s for sure. Much to my astonishment I managed to log 36 contacts! Hopefully there will be a lot more activity on PSK-31 from here on out!
--
All the best,
Ken N6PCD/0
070 #801
LONP #187


Phillippines on 20M

Bill Williams
 

A new country for me.  Klaus on a club station 14.071360
73,
Bill
AG4QX
398


Re: Christmas run

Stephen Melachrinos
 

Ken -

Good job, but you need to send the log. Did you forget the attachment?

Please note the instructions on the web page.


Steve


-----Original Message-----
From: Ken Campbell <n6pcd1@...>
To: main@070Club.groups.io
Sent: Sat, Dec 26, 2020 9:08 am
Subject: Re: [070Club] Christmas run

Yeah, it was a good time, that’s for sure. Much to my astonishment I managed to log 36 contacts! Hopefully there will be a lot more activity on PSK-31 from here on out!
--
All the best,
Ken N6PCD/0
070 #801
LONP #187

1801 - 1820 of 66684