Date   

Re: Interesting morning on 40m

Jim K5SP
 

Nothing on 40 here, 20 is in and out. Saw an LZ DO and couple others but can't work them.

JIM K5SP 



Sent via the Samsung Galaxy S®6 active, an AT&T 4G LTE smartphone

-------- Original message --------
From: Rick - N7WE <n7we1980@...>
Date: 3/9/18 8:58 AM (GMT-06:00)
To: 070Club@groups.io
Subject: Re: [070Club] Interesting morning on 40m

OK - 20m too garbled for me this morning.  I'm out. 

Did see a signal - looked like an unmodulated single carrier only - that started about 14.070.300 and then would float up, lock on a freq. for a bit, then float up again.  Signal was continous but the time it locked on a freq. varied substantially.  The amount of change in freq. between locks varied too. Finally disappeared about 14.071.800.  Then reappeared back near 14.070.300 and did it again.  Never seen that before!  Anyone have any idea what it might have been?
--
Rick - N7WE
070 - #1602
--
Jim,  K5SP #483
Member Services Director


Re: Interesting morning on 40m

Jerry N9AVY
 

Probably some kind of "birdie" from a Part 15 device.  I see them occasionally on 20m , but mostly on 15 & 10 when I check these bands.

Jerry  n9avy



From: Rick - N7WE <n7we1980@...>
To: 070Club@groups.io
Sent: Friday, March 9, 2018 8:58 AM
Subject: Re: [070Club] Interesting morning on 40m

OK - 20m too garbled for me this morning.  I'm out. 

Did see a signal - looked like an unmodulated single carrier only - that started about 14.070.300 and then would float up, lock on a freq. for a bit, then float up again.  Signal was continous but the time it locked on a freq. varied substantially.  The amount of change in freq. between locks varied too. Finally disappeared about 14.071.800.  Then reappeared back near 14.070.300 and did it again.  Never seen that before!  Anyone have any idea what it might have been?
--
Rick - N7WE
070 - #1602



Re: Interesting morning on 40m

Rick - N7WE
 

OK - 20m too garbled for me this morning.  I'm out. 

Did see a signal - looked like an unmodulated single carrier only - that started about 14.070.300 and then would float up, lock on a freq. for a bit, then float up again.  Signal was continous but the time it locked on a freq. varied substantially.  The amount of change in freq. between locks varied too. Finally disappeared about 14.071.800.  Then reappeared back near 14.070.300 and did it again.  Never seen that before!  Anyone have any idea what it might have been?
--
Rick - N7WE
070 - #1602


Re: Interesting morning on 40m

Jerry N9AVY
 

yes,  7070



From: Doc <gsbishop@...>
To: 070Club@groups.io
Sent: Friday, March 9, 2018 8:11 AM
Subject: Re: [070Club] Interesting morning on 40m

Where at ?? 7.0715 ?? I'll be there !!

On 3/9/2018 9:08 AM, Rick - N7WE wrote:
Maybe add Florida?  I'm CQing on 40m for a little while.
--
Rick - N7WE
070 - #1602


Virus-free. www.avast.com



Re: 070 Award Checker

Jerry N9AVY
 

Jordi:

Your recent upload was not your entire log.

jerry  n9avy



From: JORDI TARRIDA <eb3jt@...>
To: 070Club@groups.io
Sent: Friday, March 9, 2018 8:10 AM
Subject: [070Club] 070 Award Checker







Re: Interesting morning on 40m

Rick - N7WE
 

Managed to work W8KQ - Jerry in MI.  No other takers. On to 20m.
--
Rick - N7WE
070 - #1602


Re: Interesting morning on 40m

Doc
 

Where at ?? 7.0715 ?? I'll be there !!


On 3/9/2018 9:08 AM, Rick - N7WE wrote:
Maybe add Florida?  I'm CQing on 40m for a little while.
--
Rick - N7WE
070 - #1602


Virus-free. www.avast.com


070 Award Checker

JORDI TARRIDA
 


Re: Interesting morning on 40m

Rick - N7WE
 

Maybe add Florida?  I'm CQing on 40m for a little while.
--
Rick - N7WE
070 - #1602


Interesting morning on 40m

Jerry N9AVY
 

Band sure looked dead, but first I worked Oregon and a few minutes later worked NY .  Both coasts from IL at 1330 UTC.  Haven't seen that in a while.

Jerry  n9avy


Re: JA on 20m

Sherri Rapp
 

Woohoo! Congratulations!

Sherri, WB4OSU

On Thu, Mar 8, 2018, 5:26 PM bowerjohn41 <poppajohnbower@...> wrote:
Just worked JA7OUV strong signal at 14.071
John KE4JB


Re: CO Grid DM 57

bowerjohn41 <poppajohnbower@...>
 

Well I'm glad you have got it in the pot!
Good Hunting
John KE4JB

On Thu, Mar 8, 2018 at 6:34 PM, Jerry N9AVY <n9avy@...> wrote:
John:


It's not rare because I already worked it... the one I haven't worked are the rare ones ! 

Jerry  n9avy

From: bowerjohn41 <poppajohnbower@...>
To: 070Club@groups.io
Sent: Thursday, March 8, 2018 5:29 PM
Subject: [070Club] CO Grid DM 57

I thin this is a fairly rare grid just had qso with KC8RST fro Delores County CO on 40m 70772
John KE4JB




Re: CO Grid DM 57

Jerry N9AVY
 

John:


It's not rare because I already worked it... the one I haven't worked are the rare ones ! 

Jerry  n9avy


From: bowerjohn41 <poppajohnbower@...>
To: 070Club@groups.io
Sent: Thursday, March 8, 2018 5:29 PM
Subject: [070Club] CO Grid DM 57

I thin this is a fairly rare grid just had qso with KC8RST fro Delores County CO on 40m 70772
John KE4JB



CO Grid DM 57

bowerjohn41 <poppajohnbower@...>
 

I thin this is a fairly rare grid just had qso with KC8RST fro Delores County CO on 40m 70772
John KE4JB


Re: Membership List

Charles Odom, KI4VMK # 2542
 

I thought about it, but I don't know what type file you would need or where to put it.

Charles, KI4VMK
# 2542

On Mar 8, 2018, at 4:54 PM, Keith Cox <n9vel@...> wrote:
Have you looked at doing it thru the notifications?
I have not done it YET but was looking at it.

73 
Keith n9vel 0771


On Mar 8, 2018, at 5:31 PM, Charles Odom, KI4VMK < ki4vmk@...> wrote:

No, nothing in fldigi like that

Charles, KI4VMK
# 2542
On Mar 8, 2018, at 4:27 PM, Jim K5SP < jinnis@...> wrote:
The way it works in MixW is that you have a file called icons.cfg that contains the call signs (and countries).  When you decode a call sign that you clicked on, MixW looks into the icons.cfg file for the callsign, if it finds it, it will point to an icon that is located in the Icons folder of Mixw, and display that icon beside the call sign.  Works the same if someone enters their QTH as  bf Egypt, it looks for Egypt, grabs the icon from the Icons folder and displays the Egyptian flag.

This is how we can tell if a call is a 070 club member or not.

Does fldigi have a system similar to this?  If so, how does it work, and does it point to a specific .dat file?

--
Jim,  K5SP #483
Member Services Director


Re: Membership List

 

Have you looked at doing it thru the notifications?
I have not done it YET but was looking at it.

73 
Keith n9vel 0771


On Mar 8, 2018, at 5:31 PM, Charles Odom, KI4VMK <ki4vmk@...> wrote:

No, nothing in fldigi like that

Charles, KI4VMK
# 2542
On Mar 8, 2018, at 4:27 PM, Jim K5SP <jinnis@...> wrote:
The way it works in MixW is that you have a file called icons.cfg that contains the call signs (and countries).  When you decode a call sign that you clicked on, MixW looks into the icons.cfg file for the callsign, if it finds it, it will point to an icon that is located in the Icons folder of Mixw, and display that icon beside the call sign.  Works the same if someone enters their QTH as  bf Egypt, it looks for Egypt, grabs the icon from the Icons folder and displays the Egyptian flag.

This is how we can tell if a call is a 070 club member or not.

Does fldigi have a system similar to this?  If so, how does it work, and does it point to a specific .dat file?

--
Jim,  K5SP #483
Member Services Director


Re: Membership List

Charles Odom, KI4VMK # 2542
 

No, nothing in fldigi like that

Charles, KI4VMK
# 2542

On Mar 8, 2018, at 4:27 PM, Jim K5SP <jinnis@...> wrote:
The way it works in MixW is that you have a file called icons.cfg that contains the call signs (and countries).  When you decode a call sign that you clicked on, MixW looks into the icons.cfg file for the callsign, if it finds it, it will point to an icon that is located in the Icons folder of Mixw, and display that icon beside the call sign.  Works the same if someone enters their QTH as  bf Egypt, it looks for Egypt, grabs the icon from the Icons folder and displays the Egyptian flag.

This is how we can tell if a call is a 070 club member or not.

Does fldigi have a system similar to this?  If so, how does it work, and does it point to a specific .dat file?

--
Jim,  K5SP #483
Member Services Director


Re: Membership List

Jim K5SP
 

The way it works in MixW is that you have a file called icons.cfg that contains the call signs (and countries).  When you decode a call sign that you clicked on, MixW looks into the icons.cfg file for the callsign, if it finds it, it will point to an icon that is located in the Icons folder of Mixw, and display that icon beside the call sign.  Works the same if someone enters their QTH as  bf Egypt, it looks for Egypt, grabs the icon from the Icons folder and displays the Egyptian flag.

This is how we can tell if a call is a 070 club member or not.

Does fldigi have a system similar to this?  If so, how does it work, and does it point to a specific .dat file?

--
Jim,  K5SP #483
Member Services Director


JA on 20m

bowerjohn41 <poppajohnbower@...>
 

Just worked JA7OUV strong signal at 14.071
John KE4JB


Italy

Jim K5SP
 

Working Italy on 20m at 1955Z   so rare to see any europe this late in the day.
--
Jim,  K5SP #483
Member Services Director

11761 - 11780 of 67684