Date   

Re: PW0T PSK

Sean \(G4UCJ\) <g4ucj.shack@...>
 

I managed to work KG4DX on 10m this evening working split. I set up a 2nd rx
window on KG4 and "tuned" up with the main window. It was a bit tricky
remembering the key sequences but once I'd got it fixed in the grey matter
it worked well. I use 2 macros (in MixW), the first sends just my call twice
(no de / k) and the 2nd is "<TX>R 599 599 TU<RX><SAVEQSO>". Took a while to
get through but tnx for the new one! For reference KG4DX said up 1 and was
listening for replies in the 2000-3000Hz area. I worked him at 1100Hz up
from his tx frequency.

73 Sean Gilbert, G4UCJ

would be for someone who is more familiar with the procedure, to
post a
brief explanation of the basics for us greenhorns who are not as
experienced
in DXing. Such as, how far UP will the DX station be listening.
I'm not an expert by any means, but here's my shot at it. I use
Digipan, so that will be my reference. And if I get anything wrong or
incomplete, I hope that someone more knowledgeable will feel free to
correct me.

As Duncan said, use the two-channel mode of the PSK software, and set
one channel on the DX station, but make the active (transmitting)
channel the other one. Select a clear frequency for your transmitting
freq--don't pile on top of everyone else. The DX station will be
looking for someone he can receive, and QRM won't help.

Get to know his rhythm, how long he listens between transmissions.
Time your calls to be that long. As Duncan points out, just send your
call. He will assume you are calling him, and doesn't need to hear his
own call repeated in a 3x3.

I guess I don't usually send "KN" instead of just "K", but maybe
that's because I don't consider myself (a W3) to be a rare catch.
Duncan and Zoli's experiences are different--maybe it depends on where
and who you are.

Macros can speed the transmission, but if you can type fast enough,
you can do it manually. Don't expect a ragchew, and don't even dream
of sending your brag file. All he wants is your callsign and report.
Most reports are "courtesy" 599s, so don't worry about being accurate.
But make sure that he gets your call correctly, and feel free to ask
for a correction if he gets it wrong. (If I had done that the first
time, I'd have a PY0FT QSL by now, instead of a "not in log"
response.)

As for how far up, it really depends. In CW and SSB operation, there
is often an indication in the "up" direction, like "up 3." And on SSB,
the signals are wider, so the "up spread" has to be wider. But on PSK,
since the bandwidths are so small, I personally think it's more likely
that he is doing exactly what you are doing, scanning across a
waterfall that's about 2-2.5 kHz wide. So I would start there--leave
my transceiver on single VFO and put his signal at the bottom, and
transmit above him in that range. You may be able to figure out where
he's looking if you can see both ends of a QSO--find the transmission
he's responding to.

BTW, be careful if he says "listening up" and you are in LSB mode. The
spectrum is inverted, and his "up" is your "down."

Duncan and I have had a number of split QSOs using this technique. I
was in California, and he was calling "CQ Africa" without obvious
responses. I didn't want to step on anyone who was calling him, but
wanted to chat if he had time and no one else replied. So I called him
about 100 Hz away. He was still able to watch for simplex responses
while I transmitted off-frequency.

If the spread gets wider than your waterfall (or your transmit
filter), you will have to figure out how to run split VFOs on you
transceiver.

FWIW, I managed to do just that last night. I had to go to the manual
to set up the VFOs, since I had never done it on the new Yaesu. And I
also had to figure out how MMTTY worked, since it wasn't a PSK
station. But I managed to get VFOa on 21079.3 (the DX transmit freq)
and I set VFOb on 21080.3 to transmit on. Since this was RTTY, the
spread was larger, and I couldn't find a dual-channel option on MMTTY.
I couldn't figure out MMTTY's macros, so I just typed everything by
hand each time. But after about five or six calls from my little
station (5 watts from a Yaesu FT-817 into an attic 40m dipole, tuned
for 15) I was rewarded with "W3HF W3HF de TI9M ur 599 599 bk". Frankly
I'm quite pleased with my first-ever RTTY contact.

I hope this helps someone. And as I said, I'm not an expert here, so
please feel free to challenge my statements.

73,
Steve
W3HF



Check out the 070 Club website at
< http://hometown.aol.com/n3dqu/podxs070.htm > for
the latest information on 070 Club activities.
To unsubscribe from this group, send an email to:
070-unsubscribe@yahoogroups.com or N3DQU@aol.com.



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/


Re: PW0T PSK

Steve W3HF
 

would be for someone who is more familiar with the procedure, to
post a
brief explanation of the basics for us greenhorns who are not as
experienced
in DXing. Such as, how far UP will the DX station be listening.
I'm not an expert by any means, but here's my shot at it. I use
Digipan, so that will be my reference. And if I get anything wrong or
incomplete, I hope that someone more knowledgeable will feel free to
correct me.

As Duncan said, use the two-channel mode of the PSK software, and set
one channel on the DX station, but make the active (transmitting)
channel the other one. Select a clear frequency for your transmitting
freq--don't pile on top of everyone else. The DX station will be
looking for someone he can receive, and QRM won't help.

Get to know his rhythm, how long he listens between transmissions.
Time your calls to be that long. As Duncan points out, just send your
call. He will assume you are calling him, and doesn't need to hear his
own call repeated in a 3x3.

I guess I don't usually send "KN" instead of just "K", but maybe
that's because I don't consider myself (a W3) to be a rare catch.
Duncan and Zoli's experiences are different--maybe it depends on where
and who you are.

Macros can speed the transmission, but if you can type fast enough,
you can do it manually. Don't expect a ragchew, and don't even dream
of sending your brag file. All he wants is your callsign and report.
Most reports are "courtesy" 599s, so don't worry about being accurate.
But make sure that he gets your call correctly, and feel free to ask
for a correction if he gets it wrong. (If I had done that the first
time, I'd have a PY0FT QSL by now, instead of a "not in log"
response.)

As for how far up, it really depends. In CW and SSB operation, there
is often an indication in the "up" direction, like "up 3." And on SSB,
the signals are wider, so the "up spread" has to be wider. But on PSK,
since the bandwidths are so small, I personally think it's more likely
that he is doing exactly what you are doing, scanning across a
waterfall that's about 2-2.5 kHz wide. So I would start there--leave
my transceiver on single VFO and put his signal at the bottom, and
transmit above him in that range. You may be able to figure out where
he's looking if you can see both ends of a QSO--find the transmission
he's responding to.

BTW, be careful if he says "listening up" and you are in LSB mode. The
spectrum is inverted, and his "up" is your "down."

Duncan and I have had a number of split QSOs using this technique. I
was in California, and he was calling "CQ Africa" without obvious
responses. I didn't want to step on anyone who was calling him, but
wanted to chat if he had time and no one else replied. So I called him
about 100 Hz away. He was still able to watch for simplex responses
while I transmitted off-frequency.

If the spread gets wider than your waterfall (or your transmit
filter), you will have to figure out how to run split VFOs on you
transceiver.

FWIW, I managed to do just that last night. I had to go to the manual
to set up the VFOs, since I had never done it on the new Yaesu. And I
also had to figure out how MMTTY worked, since it wasn't a PSK
station. But I managed to get VFOa on 21079.3 (the DX transmit freq)
and I set VFOb on 21080.3 to transmit on. Since this was RTTY, the
spread was larger, and I couldn't find a dual-channel option on MMTTY.
I couldn't figure out MMTTY's macros, so I just typed everything by
hand each time. But after about five or six calls from my little
station (5 watts from a Yaesu FT-817 into an attic 40m dipole, tuned
for 15) I was rewarded with "W3HF W3HF de TI9M ur 599 599 bk". Frankly
I'm quite pleased with my first-ever RTTY contact.

I hope this helps someone. And as I said, I'm not an expert here, so
please feel free to challenge my statements.

73,
Steve
W3HF


Re: PW0T PSK

Bernie <kf4fhs@...>
 

Hello Sean,

I agree with you.

Bitching and complaining are a good way for one to vent their frustrations,
but do little else to solve the problem. Perhaps a more productive approach
would be for someone who is more familiar with the procedure, to post a
brief explanation of the basics for us greenhorns who are not as experienced
in DXing. Such as, how far UP will the DX station be listening.
Or at least, maybe someone could tell us where we can find this
information.

Thank-You & 73,
Bernie / KF4FHS

----- Original Message -----
From: "Sean (G4UCJ)" <g4ucj.shack@ntlworld.com>
To: <070@yahoogroups.com>
Sent: Monday, February 25, 2002 5:18 AM
Subject: Re: [070] PW0T PSK


Hi Duncan et al, yep it's the same wherever and whatever mode! Being
mainly
(dare I say this on here?) a CW op, I find exactly the same thing-the
really
confusing one is when the DX listens DOWN (that is a concept a lot of
DXers
haven't grasped!). Perhaps now would be a good time to remind PSK op's
just
how to operate split frequency as it seems to confuse a lot of
stations-the
programs don't seem to be very intuitive in that respect (well not when
you
migrate from CW!). I would appreciate a refresher so that I don't join the
lid brigade and get chased by the "band police".

73 Sean Gilbert, G4UCJ
County Morse Examiner
Email: g4ucj.shack@ntlworld.com
AX25: g4ucj@gb7imk.#43.gbr.eu
TCP/IP: 44.131.160.74


Re: PW0T PSK

Dick Thompson <wb0dul@...>
 

Good advice, Duncan.  I worked the PW0T operation on 20m SSB and they were operating split.  But it was amazing that stations were calling on their operating frequency when they were saying "PW0T, up".  This was in plain English.  You can imagine what was happening when they were on CW.  I swear, on CW, most of the stations calling them were incapable of copying CW and had a heard time understanding the word "up". 
 
I, and I am sure others, appreciate your comments. 
 
73,
 
Dick
 
 

----- Original Message -----
From: Duncan
To: 070@...
Cc: Rod
Sent: Monday, February 25, 2002 5:03 AM
Subject: [070] PW0T PSK

de Jungle Telegraph
It is very disappointing to read on the Trindade website that they only made 57 psk
QSOs. They will probably not use this mode again, because the 'operators' will not
obey the Trindade and work the split frequency.
People were inanely calling on top of the PW0T trace, so nobody knew who he called
further up the frequency. The QSO 'rate' was so poor, because of this, that many
will now miss out.
I have found too that when I called KG4 today in 15M psk, several stations called
ME! Dammit! Please PSKers learn to operate correctly Please! Pretty please!
The secret to 'DXing' is to listen (watch your screen), and listen, (watch your screen)
and keep doing that until you KNOW what is going on! Then pick a clear frequency
and use Your call sign, not the DX callsign.... They actually know their own callsign....When
you call use your own call no more than 3 times and then put KN KN...This means you
are inviting only the DX station to call you, if he sees your trace in the clear.
PW0T only requires an RST from you, and your correct callsign...and that is ALL!
They do NOT need to know that you have a 16 bit sound card, or your name/QTH!

Set two macros with your call on one, and a reply, "QSL ur also 599 Tnx  73s de K " on the second one...

If you haven't got a PSK program with dual channels, then set your 2nd VFO in the
listening frequency, that is where the others are all calling, switch to split VFO
and TX above the object station, or below as the case may be...You will know that
when you watch the DX station's instructions!

de ZL3JT (Pacific Pilot- Oceania for PW0T)



__________________________________________________
Advertise with ZFREE - to find out more click below
http://www.zfree.co.nz/about-us/advert.html


   Check out the 070 Club website at
< http://hometown.aol.com/n3dqu/podxs070.htm > for
the latest information on 070 Club activities.
  To unsubscribe from this group, send an email to:
070-unsubscribe@... or N3DQU@....



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


Re: PW0T PSK

Sean \(G4UCJ\) <g4ucj.shack@...>
 

Hi Duncan et al, yep it's the same wherever and whatever mode! Being mainly
(dare I say this on here?) a CW op, I find exactly the same thing-the really
confusing one is when the DX listens DOWN (that is a concept a lot of DXers
haven't grasped!). Perhaps now would be a good time to remind PSK op's just
how to operate split frequency as it seems to confuse a lot of stations-the
programs don't seem to be very intuitive in that respect (well not when you
migrate from CW!). I would appreciate a refresher so that I don't join the
lid brigade and get chased by the "band police".

73 Sean Gilbert, G4UCJ
County Morse Examiner
Email: g4ucj.shack@ntlworld.com
AX25: g4ucj@gb7imk.#43.gbr.eu
TCP/IP: 44.131.160.74

----- Original Message -----
From: "Duncan" <zl3jt@zfree.co.nz>
To: <070@yahoogroups.com>
Cc: "Rod" <wc7n@gb.wave.net>
Sent: Monday, February 25, 2002 12:03 PM
Subject: [070] PW0T PSK


de Jungle Telegraph
It is very disappointing to read on the Trindade website that they only
made 57 psk
QSOs. They will probably not use this mode again, because the 'operators'
will not
obey the Trindade and work the split frequency.
People were inanely calling on top of the PW0T trace, so nobody knew who
he called
further up the frequency. The QSO 'rate' was so poor, because of this,
that many
will now miss out.
I have found too that when I called KG4 today in 15M psk, several stations
called
ME! Dammit! Please PSKers learn to operate correctly Please! Pretty
please!
The secret to 'DXing' is to listen (watch your screen), and listen, (watch
your screen)
and keep doing that until you KNOW what is going on! Then pick a clear
frequency
and use Your call sign, not the DX callsign.... They actually know their
own callsign....When
you call use your own call no more than 3 times and then put KN KN...This
means you
are inviting only the DX station to call you, if he sees your trace in the
clear.
PW0T only requires an RST from you, and your correct callsign...and that
is ALL!
They do NOT need to know that you have a 16 bit sound card, or your
name/QTH!

Set two macros with your call on one, and a reply, "QSL ur also 599 Tnx
73s de <callsign>
K " on the second one...

If you haven't got a PSK program with dual channels, then set your 2nd VFO
in the
listening frequency, that is where the others are all calling, switch to
split VFO
and TX above the object station, or below as the case may be...You will
know that
when you watch the DX station's instructions!

de ZL3JT (Pacific Pilot- Oceania for PW0T)



__________________________________________________
Advertise with ZFREE - to find out more click below
http://www.zfree.co.nz/about-us/advert.html


Check out the 070 Club website at
< http://hometown.aol.com/n3dqu/podxs070.htm > for
the latest information on 070 Club activities.
To unsubscribe from this group, send an email to:
070-unsubscribe@yahoogroups.com or N3DQU@aol.com.



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/


Re: PW0T PSK

Zoltan Bordas <borzol@...>
 

I have found too that when I called KG4 today in 15M psk, several stations
called
ME! Dammit! Please PSKers learn to operate correctly Please! Pretty
please!

Yes, funny (but sad too) I was also called instead of the KG4... And
regarding split in PSK mode very, very few people wants to use it (perhaps
they don't know this technique???)

I also ask to pay attention to that UP...

73 de Zoli / YO5CRQ


PW0T PSK

Duncan <zl3jt@...>
 

de Jungle Telegraph
It is very disappointing to read on the Trindade website that they only made 57 psk
QSOs. They will probably not use this mode again, because the 'operators' will not
obey the Trindade and work the split frequency.
People were inanely calling on top of the PW0T trace, so nobody knew who he called
further up the frequency. The QSO 'rate' was so poor, because of this, that many
will now miss out.
I have found too that when I called KG4 today in 15M psk, several stations called
ME! Dammit! Please PSKers learn to operate correctly Please! Pretty please!
The secret to 'DXing' is to listen (watch your screen), and listen, (watch your screen)
and keep doing that until you KNOW what is going on! Then pick a clear frequency
and use Your call sign, not the DX callsign.... They actually know their own callsign....When
you call use your own call no more than 3 times and then put KN KN...This means you
are inviting only the DX station to call you, if he sees your trace in the clear.
PW0T only requires an RST from you, and your correct callsign...and that is ALL!
They do NOT need to know that you have a 16 bit sound card, or your name/QTH!

Set two macros with your call on one, and a reply, "QSL ur also 599 Tnx 73s de <callsign>
K " on the second one...

If you haven't got a PSK program with dual channels, then set your 2nd VFO in the
listening frequency, that is where the others are all calling, switch to split VFO
and TX above the object station, or below as the case may be...You will know that
when you watch the DX station's instructions!

de ZL3JT (Pacific Pilot- Oceania for PW0T)



__________________________________________________
Advertise with ZFREE - to find out more click below
http://www.zfree.co.nz/about-us/advert.html


PSK Split

WB5NHL
 

I guess I'll throw my 2 cents in having worked KG4DX
and KG4PK on 10, 15 and 20 in 3 hours.

Running "split" with Hamscope and the spectrum
display is a piece of cake. I normally run dual
receive and watch QSO's so I know when to jump in. In
fact the biggest (and it isn't very big) problem with
Hamscope is to watch which window is active (i.e.
which you will transmit in). More than once I'll
start a macro in the wrong window.

OBTW 070 contests are the best way to sharpen these
skills. I just had to say it.

How can we get VU's on PSK on 20m. It's 01:30z and I
just heard VU2WAP on SSB with my attic dipole (first
VU at this location). Would sure like to work one on
PSK. Pardon the wishful musings.

73 Dave WB5NHL


YO Award

Bills4570@...
 

YOooooooHoooo,

That looks like fun! Got one in the log. Four more in
Y2K'02 will be a real challenge. The beam heading is 210
for you Romanians. I'll be listening.

73 Bill
KG6EXF


Re: YO-Romania

Charlie Trice, K8IJ <k8ij@...>
 

I'm 20% there!
 
Chas, K8IJ

----- Original Message -----
From: DL2AYL@...
To: 070@...
Sent: Sunday, February 24, 2002 14:17 PM
Subject: Re: [070] YO-Romania

I  like that one, will work on that !
Erika/DL2AYL

----- Original Message -----
From: <N3DQU@...>
To: <070@...>
Sent: Sunday, February 24, 2002 8:00 PM
Subject: [070] YO-Romania


>    New endorsement up on the 070 website for working YO prefixes...Check
it
> out! 73 de Jay N3DQU.
>
>
>    Check out the 070 Club website at
> < http://hometown.aol.com/n3dqu/podxs070.htm > for
> the latest information on 070 Club activities.
>   To unsubscribe from this group, send an email to:
> 070-unsubscribe@... or N3DQU@....
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>


   Check out the 070 Club website at
< http://hometown.aol.com/n3dqu/podxs070.htm > for
the latest information on 070 Club activities.
  To unsubscribe from this group, send an email to:
070-unsubscribe@... or N3DQU@....



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


PW0T on 15 m PSK31

Costas Krallis SV1XV <sv1xv@...>
 

PW0T now active on 21071.2 kHz
24 Feb 2002 1930 UTC



+------------------------------------------------------------+
| Costas Krallis SV1XV * LOC KM18UA |
| P.O.Box 3066 * E-Mail: sv1xv@eexi.gr |
| GR-10210 Athens * PGP key: 0x3BDBBC34 |
| GREECE * http://www.qsl.net/sv1xv/ |
+------------------------------------------------------------+


Re: YO-Romania

DL2AYL@...
 

I like that one, will work on that !
Erika/DL2AYL

----- Original Message -----
From: <N3DQU@aol.com>
To: <070@yahoogroups.com>
Sent: Sunday, February 24, 2002 8:00 PM
Subject: [070] YO-Romania


New endorsement up on the 070 website for working YO prefixes...Check
it
out! 73 de Jay N3DQU.


Check out the 070 Club website at
< http://hometown.aol.com/n3dqu/podxs070.htm > for
the latest information on 070 Club activities.
To unsubscribe from this group, send an email to:
070-unsubscribe@yahoogroups.com or N3DQU@aol.com.



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/


YO-Romania

N3DQU@...
 

New endorsement up on the 070 website for working YO prefixes...Check it
out! 73 de Jay N3DQU.


PDX Award

Ernest Mills <emills@...>
 

    Congratulations to Rich, VE3IAY (070 # 175) who successfully claims the PODXS-DPX MIXED award with endorsement for 500 confirmed QSO's, and for 450 QSO's confirmed in the dedicated Rtty Award :) 
    Excellent and again congratulations. 73 Ernie


Re: 21071.2 intruder

DL2AYL@...
 

It is here too, but very weak, just a trace.
Erika/DL2AYL

----- Original Message -----
From: "Costas Krallis SV1XV" <sv1xv@eexi.gr>
To: <070@yahoogroups.com>
Sent: Saturday, February 23, 2002 8:41 AM
Subject: [070] 21071.2 intruder



Has anyone noticed the "VVV" beacon transmission
in CW mode near 21071 kHz? It started again
today 23 February 2002 at 0630 UTC a few Hz
below VK5XE pile-up.

Costas SV1XV




+------------------------------------------------------------+
| Costas Krallis SV1XV * LOC KM18UA |
| P.O.Box 3066 * E-Mail: sv1xv@eexi.gr |
| GR-10210 Athens * PGP key: 0x3BDBBC34 |
| GREECE * http://www.qsl.net/sv1xv/ |
+------------------------------------------------------------+



Check out the 070 Club website at
< http://hometown.aol.com/n3dqu/podxs070.htm > for
the latest information on 070 Club activities.
To unsubscribe from this group, send an email to:
070-unsubscribe@yahoogroups.com or N3DQU@aol.com.



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/


21071.2 intruder

Costas Krallis SV1XV <sv1xv@...>
 

Has anyone noticed the "VVV" beacon transmission
in CW mode near 21071 kHz? It started again
today 23 February 2002 at 0630 UTC a few Hz
below VK5XE pile-up.

Costas SV1XV




+------------------------------------------------------------+
| Costas Krallis SV1XV * LOC KM18UA |
| P.O.Box 3066 * E-Mail: sv1xv@eexi.gr |
| GR-10210 Athens * PGP key: 0x3BDBBC34 |
| GREECE * http://www.qsl.net/sv1xv/ |
+------------------------------------------------------------+


Re: 070 Club forum at Dayton

Dick Thompson <wb0dul@...>
 

Nice to know that there will be an 070 forum at Dayton, Jay.  Since you've never been there, I offer the following advice:  Bring Money and a good pair of comfortable walking shoes. 
 
See you there.  Our plans aren't firmed up yet, but I'm 80% sure we'll be going to Dayton this year.  Last time I was there was in '95. 
 
See you there.
 
Dick - 070 #180
 
 

----- Original Message -----
From: N3DQU@...
To: 070@...
Sent: Thursday, February 21, 2002 12:08 PM
Subject: [070] 070 Club forum at Dayton

   Well, it's official! The 070 Club will be hosting a forum this year at
Dayton. We have a spot reserved for Sunday, 11:00 to noon in Room 2. Stop by
to sign the logbook, have an eyeball, maybe get an Attaboy too! I will be
there for sure and Erika DL2AYL sez her bags are packed and waiting by the
door! Would you believe that in 25 years of hammin', I have yet to make it to
Dayton, so believe me when I tell you I am really looking forward to May and
hopefully meeting some of you guys and gals in person! For more info on the
Hamvention, check out their website at < http://www.hamvention.org/ > ...73
de Jay N3DQU.


   Check out the 070 Club website at
< http://hometown.aol.com/n3dqu/podxs070.htm > for
the latest information on 070 Club activities.
  To unsubscribe from this group, send an email to:
070-unsubscribe@... or N3DQU@....



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


070 Club forum at Dayton

N3DQU@...
 

Well, it's official! The 070 Club will be hosting a forum this year at
Dayton. We have a spot reserved for Sunday, 11:00 to noon in Room 2. Stop by
to sign the logbook, have an eyeball, maybe get an Attaboy too! I will be
there for sure and Erika DL2AYL sez her bags are packed and waiting by the
door! Would you believe that in 25 years of hammin', I have yet to make it to
Dayton, so believe me when I tell you I am really looking forward to May and
hopefully meeting some of you guys and gals in person! For more info on the
Hamvention, check out their website at < http://www.hamvention.org/ > ...73
de Jay N3DQU.


Re: Gitmo

Ross <rrslater@...>
 

I did not get to work him on 17 but did manage to get him on 20.

Ross
(KE4BCN)

----- Original Message -----
From: "hamopcq" <HAMOPCQ@AOL.COM>
To: <070@yahoogroups.com>
Sent: Tuesday, February 19, 2002 5:21 PM
Subject: [070] Re: Gitmo


Hi All,
I was able to work Chuck on 17mtrs. BTW, the QSL route is N8CH.
Regards,
Lenny K2LAM

--- In 070@y..., "Stephen J. Melachrinos" <w3hf@a...> wrote:
KG4NW is lonely on 17m now, calling CQ. Counts not only as a
country, but a QSO on a WARC band for 070 Tri-WARC.

Steve
W3HF


Check out the 070 Club website at
< http://hometown.aol.com/n3dqu/podxs070.htm > for
the latest information on 070 Club activities.
To unsubscribe from this group, send an email to:
070-unsubscribe@yahoogroups.com or N3DQU@aol.com.



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



Poll results for 070

070@...
 

The following 070 poll is now closed. Here are the
final results:


POLL QUESTION: How much power did you generally use
to make contacts during the PSKFEST on
19 Jan 2002?

CHOICES AND RESULTS
- 1 to 5 Watts max (or Less), 4 votes, 21.05%
- 6 to 20 watts max, 0 votes, 0.00%
- 21 to 30 watts max, 5 votes, 26.32%
- 31 to 40 watts max, 6 votes, 31.58%
- 41 to 50 watts max, 4 votes, 21.05%
- 51 to 60 watts max, 0 votes, 0.00%
- 61 to 70 watts max, 0 votes, 0.00%
- 71 to 80 watts max, 0 votes, 0.00%
- 81 to 90 watts max, 0 votes, 0.00%
- 91 to 100 watts max, 0 votes, 0.00%



For more information about this group, please visit
http://groups.yahoo.com/group/070

For help with Yahoo! Groups, please visit
http://help.yahoo.com/help/us/groups/