|
Re: Signalink USB
Stephen Melachrinos
Thank you to all who shared. That was very helpful.
Some things that weren't clear in my question factored into the decision:
- I am not looking (at least not now) for rig control.
- I am looking for something with a built-in sound card, so all connections (PTT and the in/out audio) are via the single USB cable.
I had read some reviews that were so-so, but I have more confidence in the opinions of the club, and they are overwhelmingly positive. So a Signalink USB will be my new interface for future portable operations.
Thanks again.
73,
Steve
W3HF
|
|
|
|
Re: Signalink USB
Steve: The Majority has spoken - you get a Signalink ! 
On Saturday, December 26, 2020, 03:23:07 PM CST, DAVE KB3RAN 1692/381 via groups.io <davehardy0101@...> wrote:
I've been using a SignaLink USB for many years and find it very adequate with my Yeasu 817 and 857 at home and portable. Have 2 of them so keep one in the camper as a duplicate station like my home station.
Dave
KB3RAN
1692/381
APE Event Manager
-----Original Message-----
From: Stephen Melachrinos via groups.io <melachri@...> To: main@070club.groups.io <main@070club.groups.io> Sent: Sat, Dec 26, 2020 1:31 pm Subject: [070Club] Signalink USB I made a comment in my "goals" for 2021 that I was looking to upgrade my computer-radio interface for portable operations. Intent is to simplify the setup by reducing the cabling, and retire a 20-year-old Rascal and its associated USB-serial converter. Radios to be addressed are both Yaesus (817 and 857)--not looking for a new radio. At the moment, I'm only interested in basic digital modes, e.g. I don't need a quadrature output on the stereo pins. I'm also interested in portability, so desktop-type solutions (e.g., large boxes) would not be preferred.
One of the options I was considering was the Signalink USB. Does anyone have any comments on this? I've seen some reviews that are critical, but I'm not sure their concerns are relevant.
How about anything else? What have I missed?
Thanks.
73,
Steve
W3HF
-- Dave H KB3RAN 1692/381
|
|
|
|
Re: Signalink USB
I've been using a SignaLink USB for many years and find it very adequate with my Yeasu 817 and 857 at home and portable. Have 2 of them so keep one in the camper as a duplicate station like my home station.
Dave
KB3RAN
1692/381
APE Event Manager
-----Original Message-----
From: Stephen Melachrinos via groups.io <melachri@...> To: main@070club.groups.io <main@070club.groups.io> Sent: Sat, Dec 26, 2020 1:31 pm Subject: [070Club] Signalink USB I made a comment in my "goals" for 2021 that I was looking to upgrade my computer-radio interface for portable operations. Intent is to simplify the setup by reducing the cabling, and retire a 20-year-old Rascal and its associated USB-serial converter. Radios to be addressed are both Yaesus (817 and 857)--not looking for a new radio. At the moment, I'm only interested in basic digital modes, e.g. I don't need a quadrature output on the stereo pins. I'm also interested in portability, so desktop-type solutions (e.g., large boxes) would not be preferred.
One of the options I was considering was the Signalink USB. Does anyone have any comments on this? I've seen some reviews that are critical, but I'm not sure their concerns are relevant.
How about anything else? What have I missed?
Thanks.
73,
Steve
W3HF
-- Dave H KB3RAN 1692/381
|
|
|
|
Re: Signalink USB
Steve-
Never tried Signalink. I have always used microHAM since I got into digital - first the USB II and now the USB III. They are a little more expensive than the Signalink, but the big plus for me is that they do full CAT with no additonal hardware or cables, which I don't think the Signalink can do. The only control I touch on either my K3 or FT897 is power on/off...everything else is done with HRD/DM780 via the computer. The good news is that the FT897, FT857, and the FT817 all use the same interface-to-rig cable and jumper configuration. So no rejiggering to switch radios. Just the three rig side breakout connectors on the DB-15 cable - miniDIN6, miniDIN8, and 3.5mm stereo plug to unplug/plug. -- Rick - N7WE 070 - #1602
|
|
|
|
Re: Signalink USB
Adam Mercier, KM7N #1310
I’ve never heard any complaints about the Signalink, but I’m a Rigblaster guy. I have 3 Rigblaster Plug and Play devices-2 in the shack paired with an Icom 707 and a Yaesu FT-857, and one in my portable ops bag for my FT-817. Never had a single problem using multiple computers. Just as the name says, they’re Plug and Play. You plug them in and the just work.
toggle quoted messageShow quoted text
Adam, KM7N
On Dec 26, 2020, at 11:31, Stephen Melachrinos via groups.io <melachri@...> wrote:
|
|
|
|
Re: Signalink USB
Steve: Seems like many ops are Signalink USB these days. Judging from comments received (brag lists) over the air. Signalink has sold thousands (millions?) of units. I switch from West Mountain interface a few years ago and opted for the Signalink. Since it has built-in sound card, you are freeing up computer from extra work and as we all should know, "not all sound cards are alike". Jerry n9avy
On Saturday, December 26, 2020, 12:31:33 PM CST, Stephen Melachrinos via groups.io <melachri@...> wrote:
I made a comment in my "goals" for 2021 that I was looking to upgrade my computer-radio interface for portable operations. Intent is to simplify the setup by reducing the cabling, and retire a 20-year-old Rascal and its associated USB-serial converter. Radios to be addressed are both Yaesus (817 and 857)--not looking for a new radio. At the moment, I'm only interested in basic digital modes, e.g. I don't need a quadrature output on the stereo pins. I'm also interested in portability, so desktop-type solutions (e.g., large boxes) would not be preferred.
One of the options I was considering was the Signalink USB. Does anyone have any comments on this? I've seen some reviews that are critical, but I'm not sure their concerns are relevant.
How about anything else? What have I missed?
Thanks.
73,
Steve
W3HF
|
|
|
|
Re: Signalink USB
Would highly recommend it; I used it along with an FT450D for the longest time. I switched to an IC-7300 about a year ago and no longer needed it and sold it on (still second guessing on that decision). I also did a modification to add a 100K resistor in place of the mic "jumper" as described here - https://wd8rif.com/radio_manuals/pdf/TigerTronics-Cables-Rev22.pdf to alleviate the issue @K5SP mentions around the "quirky" TX Pot.....
73 de Paul @KC9SEB
|
|
|
|
Re: Christmas run
I did attach the file!!!
-- All the best, Ken N6PCD/0 070 #801 LONP #187
|
|
|
|
Re: Signalink USB
JEFF WALSH
Steve
toggle quoted messageShow quoted text
Been using a Signalink for years with no problems. Jeff W3WMU
On Dec 26, 2020, at 1:10 PM, KB1NAL via groups.io <kb1nal@...> wrote:
|
|
|
|
Re: Signalink USB
David, K9DWR
* Stephen Melachrinos via groups.io <melachri=verizon.net@groups.io> [2020-12-26 18:31]:
One of the options I was considering was the Signalink USB. Does anyone haveI've had my SignaLink for about 7 years now and have never had an issue with it. They aren't cheap, but they are solid. The main thing I've seen in my setup was needing to choke the USB cable to avoid RFI. I've only used it with Kenwood radios, and needed to jumper the gain up for one of the radios (the TS-440), but that's all documented and easy to do. I have no problem recommending one. -- David, K9DWR #1604 LONP #255 david@graniteweb.com
|
|
|
|
Re: Signalink USB
KB1NAL
I've been using a SignaLink USB for the past 10 plus yrs, without any issues. Use it for all my digital modes on VHF and HF.. I'ts interfaced with an IC-746PRO and an old HP Pavilion running WIN 10 OS. Greatly designed and built device. You will NOT be disappointed.. 73 de Lee KB1NAL
|
|
|
|
Re: Welcome 2813
Loren McCullough - WA3WZR
excellent! Welcome Tony. He was one of my contacts during the Christmas run and I gave him info about the club.
Loren WA3WZR
|
|
|
|
Re: Signalink USB
I like me signalink.
toggle quoted messageShow quoted text
Simple easy to use. Wb8yxf Fr Richard
|
|
|
|
Re: Christmas Run 2020 - "Operating Event"
I got started late due to family. Got 5 contacts but they were all great conversations. Even got milt like he was next door.
Scotty W7PSK
On 12/26/2020 10:17, Bob Motyl KK6KMU
wrote:
Thank you too everyone who had their hand into this one day event. I have tried to get twenty five contacts before but never made it. Made it this time. Hope this is a trend of good things to come. --
Scotty W7PSK Everett, Washington 070 #138
|
|
|
|
Re: Signalink USB
Alex Vincer
Steve W3HF, I have a Signalink USB and I love it. I couldn’t get it working for a while because I had not read the jumper instructions carefully enough and had the jumpers in the wrong position for the Data port on my Yaesu FT-450D. Once I figured that out everything has worked great. Good luck and 73, Alex KD9MGA
On Sat, Dec 26, 2020 at 12:43 PM Alan Sorum WL7CG <asorum@...> wrote:
--
|
|
|
|
Re: Signalink USB
Wish I had not got rid of my Signalink :(.
On 12/26/2020 10:42, Jim K5SP wrote:
--
Scotty W7PSK Everett, Washington 070 #138
|
|
|
|
Re: Signalink USB
Alan Sorum WL7CG
Steve, I have two of them, one on my FT-950 at home and the other with a FT-891 I use for portable ops. Never have had any issues with them, they always works as needed. I see them for sale on QRZ from time to time. Good luck. 73 Alan WL7CG
On 12/26/20 9:31 AM, Stephen
Melachrinos via groups.io wrote:
|
|
|
|
Re: Signalink USB
I started out with a Rigblaster. Too many cables, so a few years ago ordered the Signalink USB, have not had a problem with it at all, and if this one ever quits will be getting another one. The TX level pot is sometimes a little quirky, but i rarely ever have to touch it Jim K5SP
On Dec 26, 2020 12:31 PM, "Stephen Melachrinos via groups.io" <melachri@...> wrote:
--
Jim, K5SP #483 Executive Director/Member Services Director
|
|
|
|
Signalink USB
Stephen Melachrinos
I made a comment in my "goals" for 2021 that I was looking to upgrade my computer-radio interface for portable operations. Intent is to simplify the setup by reducing the cabling, and retire a 20-year-old Rascal and its associated USB-serial converter. Radios to be addressed are both Yaesus (817 and 857)--not looking for a new radio. At the moment, I'm only interested in basic digital modes, e.g. I don't need a quadrature output on the stereo pins. I'm also interested in portability, so desktop-type solutions (e.g., large boxes) would not be preferred.
One of the options I was considering was the Signalink USB. Does anyone have any comments on this? I've seen some reviews that are critical, but I'm not sure their concerns are relevant.
How about anything else? What have I missed?
Thanks.
73,
Steve
W3HF
|
|
|
|
Re: Christmas Run 2020 - "Operating Event"
Bob Motyl KK6KMU
Thank you too everyone who had their hand into this one day event. I have tried to get twenty five contacts before but never made it. Made it this time. Hope this is a trend of good things to come.
Thanks to Steve for volunteering too compile the results. Merry Christmas and A Happy New Year to all. Bob KK6KMU
|
|
|
