...which one?

Nice Charles! I'm still one short so maybe soon I'll be able to make the same claim. GL & GDX!! 73 Joe KA1PPV #1482

I'd suggest you join and post the question the the N1NNPlus email list. It's hosted on Yahoogroups. There's a lot of support there including from the developers. Mike - W0TMW

Always a great milestone. Good job! :-) — David, K9DWR #1604 LONP #255 david@...

If anyone out there has run N1MM as a multi-op over the internet using OpenVPN, please email me privately. I have a friend who is trying to set up for the salmon run and they are having trouble making

Congratulations Charles! Well Done! Paula K7PAX #1739

Dick did you come through EM13ko? If you did I missed you, thought you might give me a holler when you came through. Jim, K5SP

Charles- Let me second what Matt said! Congrats on a memorable milestone. With prop like it has been, you are to be doubly congratulated! Rick - N7WE 070 - #1602

Dick - Glad you are back and dodged the bullet. We were very fortunate too. Eye came right over us about 2:30 AM Monday. Our house survived with no damage! Only tree limbs and shrubs to cut and

GOOD JOB, CHARLES!!! Congratulations! 73 Matt King AK4MK - 070 #1708 PODXS 070 Club Executive Director

Got my PSK31 WAS today Charles KI4VMK 🇺🇸

Glad you fared well, NW Florida doged the bullet. Charles KI4VMK 🇺🇸

Hi All, We made it back to FL on Weds evening.  No damage to house, but a couple of my wire antennas needed some repair.  Lots of branches and other tree stuff down, so looks like keeping busy for

Hi, y'all! To all the folks that RAN/HELD/HOSTED (not just worked) an APE event... please go ahead and submit your APE event log at http://hamclubs.info/scorer/?contest_id=070-APE&year=2017 The

Mike-- I don't want to tie up the PODXS group with off topic messages. If you would like to shoot me an email I'd be happy to make a few suggestions that might get you on track. ars.k0vc@... ---In

Still working through it. Currently have VPSE set as a ‘Splitter’ and Com4 is split to Com8. Port settings on the rig, VPSE and both applications match. Still getting the ‘The parameter is

I think you'll be good once you find an open COM port and get your cat settings figured out. Also, be sure the VSPE COM port settings (baud rate, etc) are the same as your rig and software.. Those

One other thing I might add to this excellent article on setting up a K3(s) is that a test carrier on an even multiple of [frequency} + 500Hz (500, 1000, 1500 etc) will not give an even 4 bars of ALC

http://www.w3fpr.com/Data_setup.htm - 73 and good DX de Mike, K6MKF, Past President - NCDXC

Hi Gang, Don, W3FPR, just posted this link to the Elecraft reflector, and I’ll post it here as well. If any folks out there have questions about setting up Elecraft rigs for the digital