Remember O'Toole's commentary on this phenomenon. "Murphy was an optimist." 73s Chuck KD9DVB

Is it possibly a picnic? Fuses all good? . Jim K5SP -- Jim, K5SP #483 Executive Director/Member Services Director

Murphy struck ! Read the manual before powering up and looked at a couple videos as well. So connected power from RS-35M and antenna. Nada . Checked power to radio and it was all the way from power

Thanks for the update of the problem. I'm no help when it comes to software. Black magic, Sorry, Bob KK6KMU

Jerry, Congrats on the new radio. Very nice radio. What software are you going to use for PSK? I use FLDIGI and FLRIG for rig control. I just changed over to FLRIG about 6 months ago and enjoy

Book does say anything. It just lays there until I open it. Heh-heh ! Am slowly working my way through the manual. Thought it best to depart from usual kamikaze attack on rig and RTFM first. Taking

The manual tells you how to do things. There is a great book available on Amazon by Andrew Barron, ZL3DW that explains why to do things. Rich, K0PIR has a website with a lot of tutorials on how to

What's the book say?... Also YouTube? There's dozens of tutorials on each and every radio that's out there. N6MG

You need the CT17 if you have multiple radios to one computer and plan to use the RS232 port on the computer. I connect the supplied USB cable direct to the port on the computer and don't use the

Congrats! I like my IC-7300 very much. All you need is a USB cable to go between the IC-7300 and the computer. The USB connection will appear as two devices: a sound card, and a USB/Serial

If that is an interface for digital the answer is no. One connection usb from radio to computer. Do not connect the two until you install the usb driver. Malcolm Ke0jbt -- Malcolm Heard, M.S. 7516

YAHOO! Santa came early for you Jerry. Enjoy! -- Rick - N7WE 070 - #1602

Fast shipping from Ohio ! 1 day . UPS said it would be here by 9 PM CST and it was here by noon ! One question for all you IC-7300 owners . Do I need CT-17 level converter ??? Thanks. Jerry n9avy

There seems to be a lot of confusion regarding the LONP, and the tracking of your contacts. Hopefully I can shed some light on what/how things are happening. When you submit your log

Don't think for a minute that we don't appreciate what you all do. I can only imagine how tedious and time consuming manually approving the endorsements can be. Thank you very much John KC3FL

P.S. David,Jim, Stan , myself and others have been working our butts off keeping up with endorsements. Keep those endorsements coming !!! Jerry

Few understand the chaos that has ensued due to the malfunctioning endorsement checker. In spite of those issues, our Executive Director, Jim, K5SP has worked his way through mess and approved a new

John I checked your last submission and you are correct. Your log was submitted at 12:05:29 12/13/20. Under you In Progress column when I click on the blue 491 under HAVE, the last

Welcome to the family, Mr. Terry! 👍🏻👋🏻😁 -- All the best, Ken N6PCD 070 #801 LONP #187

Yep, noticed that. Jerry n9avy