Date   

Re: Trying to wrap up PODX 070 366 endorsement

alan thompson <n8fl1996@...>
 

Ok Jim thanks for the update. I also have another question for you, I upload to awards page and it took
Me about 10 times trying to submit my
Grid awards to finally getting them submitted but they still haven’t been updated ? Just wondering if page has had a problem.


On Fri, Jun 25, 2021 at 11:11 PM Jim K5SP <jinnis@...> wrote:
Alan, the results were held up due to missing a bonus station log.

We have decided to proceed and all who have the station in their log will get credit .

Give a couple days more to finalize and will be published.

Thanks to all for your patience. 

Jim K5SP 


On Fri, Jun 25, 2021 at 3:33 PM, alan thompson
<n8fl1996@...> wrote:
If you need wv or 366 I’ll be in shack if Im in your  propagation path   De N8fl,  070 # 2219, just shoot me an email, by the way anyone ever seen results of 2021 TDW contest yet?

On Fri, Jun 25, 2021 at 4:01 PM Bob Motyl KK6KMU <bobmotyl@...> wrote:
Dave,
I will be looking for you again this evening.  I need the 26th also.

Bob 
KK6KMU


--
Jim,  K5SP #483
Executive Director/Member Services Director


Re: Trying to wrap up PODX 070 366 endorsement

Jim K5SP
 

Alan, the results were held up due to missing a bonus station log.

We have decided to proceed and all who have the station in their log will get credit .

Give a couple days more to finalize and will be published.

Thanks to all for your patience. 

On Fri, Jun 25, 2021 at 3:33 PM, alan thompson
<n8fl1996@...> wrote:
If you need wv or 366 I’ll be in shack if Im in your  propagation path   De N8fl,  070 # 2219, just shoot me an email, by the way anyone ever seen results of 2021 TDW contest yet?

On Fri, Jun 25, 2021 at 4:01 PM Bob Motyl KK6KMU <bobmotyl@...> wrote:
Dave,
I will be looking for you again this evening.  I need the 26th also.

Bob 
KK6KMU


--
Jim,  K5SP #483
Executive Director/Member Services Director


Jay N4NUI

Jerry N9AVY
 

Got you LoTW confirmation.  You need to revise it because it says you're on IOTA NA-006, but am not aware of any islands in Utah.   

Thanks  ,

Jerry  n9avy 


Re: Trying to wrap up PODX 070 366 endorsement

alan thompson <n8fl1996@...>
 

If you need wv or 366 I’ll be in shack if Im in your  propagation path   De N8fl,  070 # 2219, just shoot me an email, by the way anyone ever seen results of 2021 TDW contest yet?

On Fri, Jun 25, 2021 at 4:01 PM Bob Motyl KK6KMU <bobmotyl@...> wrote:
Dave,
I will be looking for you again this evening.  I need the 26th also.

Bob 
KK6KMU


Re: Trying to wrap up PODX 070 366 endorsement

Bob Motyl KK6KMU
 

Dave,
I will be looking for you again this evening.  I need the 26th also.

Bob 
KK6KMU


Re: New Chat: Field Day #chat-notice

Barry VA7GEM
 

On Wed, Jun 23, 2021 at 04:27 PM, Jerry N9AVY wrote:
 
Seems like there's a lot of different chats.  Can't we just use the Contests thing ? I confused...
 
 
Jerry  n9avy
 

 

Jerry
It was set up for this and worked well for everyone.
By using chat we can exclude those members who only use email.
Times are a changing.
I for one will be where I always am. Contest Reflector.
cheers
Barry


Re: South Cook Island

Barry VA7GEM
 

On Wed, Jun 23, 2021 at 12:04 PM, Bob Motyl KK6KMU wrote:
20 meters has been open for me more than two hours after sunset.  I was calling and landed Bob E51BQ yesterday about 0400 UTC.  I had contact with him in 2017 but he said he has been away form PSK since then.  I know its late for the east coast but try calling on 20 meters well after sunset.  You just might get lucky
--
Bob  KK6KMU  #2484
Bob
I agree the East Coast could get lucky and catch a Left Coaster.
cheers
Barry


Re: Trying to wrap up PODX 070 366 endorsement

Geary McDowell
 

Great Dave!
I should be on air the first two and will look for you. 
73, Geary KE5IRK 

On Thu, Jun 24, 2021 at 5:25 AM DAVE KB3RAN 1692/381 via groups.io <davehardy0101=aol.com@groups.io> wrote:
Okay, guys.  I'm down to 3 days needed. And the 25th and 26th are 2 of them.  I'll be on the air tonight to get one of them (364) and tomorrow night for the 365.  August 23 is my 366 and I'll be operating from West Quoddy Head Lighthouse for International Lighthouse/Lightship Weekend if my plans work. That's going to be an APE, an ILLW  and a 366 operation and nearly my birthday.  Hope it all works.

Look for my CQ 366 call tonight and tomorrow.  I will be on the air Field Day weekend and will come out of FD mode to make a 366 contact for those needing one.

See you on the waterfall.

Dave
KB3RAN
2692/381
APE Event Mgr.

--
Dave H KB3RAN 1692/381

--
When all else fails, Amateur Radio works.


Re: IC-7300 with Fldigi - setup for PSK-31

Stephen Melachrinos
 

I can't speak to other radios, but Mike's approach is true for my FT-817 and FT-857. If I adjust so there's no ALC indication on the 817's display, then I have no output.

Steve
W3HF

-----Original Message-----
From: Mike W4BZM <behrcave@...>
To: main@070Club.groups.io
Sent: Thu, Jun 24, 2021 10:40 am
Subject: Re: [070Club] IC-7300 with Fldigi - setup for PSK-31

I repeated see the admonition to adjust the audio until the ALC just start to move, and then adjust it back down to where the ALC doesn’t move at all.  While this method may be appropriate for Icom rigs, Yaesu seems to use a different philosophy for their ALC display.  There is a zone to the the left which displays permissible operation and a zone to the right which should be avoided.  So the procedure is to adjust the audio drive so the ALC indication stays in high side of the left zone .  (See attachment from the FTDX-10 Operating Manual.)  I’ve used this method for years on my FT-991 and am now using it on the FTDX-10, and I consistently get good signal reports.  

Mike W4BZM


Re: IC-7300 with Fldigi - setup for PSK-31

 

Doug,

Looking at those instructions for the FTDX10 looks like they are saying to turn on your processor.  Under no circumstances use processing, you'll wipe out the waterfall.  I have two Yaesu rigs and processing cannot be turned on in the data modes.  The FTDX10 is a great rig but they must be using some other method for the data modes.
The method I use was suggested to me by an ARRL OO years ago and that was to run the rig at full power, 100 watts and adjust the power out with the mic gain for the desired output.  Doing it that way I would have to boost the mic gain to put out 80 or 90 watts before I showed ALC and start to splash.

John
KC3FL


Re: IC-7300 with Fldigi - setup for PSK-31

Jerry N9AVY
 

Not true of my FT-1000MP.   Adjust mic gain until no indication on ALC meter.  

Jerry   n9avy  #454

On Thursday, June 24, 2021, 09:41:03 AM CDT, Mike W4BZM <behrcave@...> wrote:


I repeated see the admonition to adjust the audio until the ALC just start to move, and then adjust it back down to where the ALC doesn’t move at all.  While this method may be appropriate for Icom rigs, Yaesu seems to use a different philosophy for their ALC display.  There is a zone to the the left which displays permissible operation and a zone to the right which should be avoided.  So the procedure is to adjust the audio drive so the ALC indication stays in high side of the left zone .  (See attachment from the FTDX-10 Operating Manual.)  I’ve used this method for years on my FT-991 and am now using it on the FTDX-10, and I consistently get good signal reports.  

Mike W4BZM


Re: IC-7300 with Fldigi - setup for PSK-31

Mike W4BZM
 

I repeated see the admonition to adjust the audio until the ALC just start to move, and then adjust it back down to where the ALC doesn’t move at all.  While this method may be appropriate for Icom rigs, Yaesu seems to use a different philosophy for their ALC display.  There is a zone to the the left which displays permissible operation and a zone to the right which should be avoided.  So the procedure is to adjust the audio drive so the ALC indication stays in high side of the left zone .  (See attachment from the FTDX-10 Operating Manual.)  I’ve used this method for years on my FT-991 and am now using it on the FTDX-10, and I consistently get good signal reports.  

Mike W4BZM


Re: Trying to wrap up PODX 070 366 endorsement

DAVE KB3RAN 1692/381
 

Okay, guys.  I'm down to 3 days needed. And the 25th and 26th are 2 of them.  I'll be on the air tonight to get one of them (364) and tomorrow night for the 365.  August 23 is my 366 and I'll be operating from West Quoddy Head Lighthouse for International Lighthouse/Lightship Weekend if my plans work. That's going to be an APE, an ILLW  and a 366 operation and nearly my birthday.  Hope it all works.

Look for my CQ 366 call tonight and tomorrow.  I will be on the air Field Day weekend and will come out of FD mode to make a 366 contact for those needing one.

See you on the waterfall.

Dave
KB3RAN
2692/381
APE Event Mgr.

--
Dave H KB3RAN 1692/381


FT8

Jerry N9AVY
 

Thanks all for straightening me out on FT8 being a weak signal mode and not a low power mode.

Jerry   n9avy


Re: Trying to wrap up PODX 070 366 endorsement

Bob Motyl KK6KMU
 

Gerry,
Saw you tonight in a QSO with John.  I was in  a QSO myself.  When I finally got back to it you were gone.  Will see you again I'm sure

Bob
KK6KMU


Re: PODXS made ARRL Contest letter !

TG Frerichs
 

Jerry,

FT8 is a weak signal mode, not necessarily a low power mode. It's easy to confuse, but one is on the receiving end and the other is on the transmitting end.

Of course, we should only use as much power as necessary to maintain a contact.  But that's true of all modes.

Tom Frerichs
AE0GQ


Re: IC-7300 with Fldigi - setup for PSK-31

 

Generally if you show Zero ALC your signal will be clean.  You can ask the other station for your IMD and S/N and tell from that.  The closer the IMD is to the negative value of the S/N, the cleaner the signal.  Better yet if the other station is running Fldigi, have them bring up the Spectrum Scope and take a screenshot of it and have them email it to you.  Here is a good website that explains how to set your audio drive. 


John
KC3FL


Re: Trying to wrap up PODX 070 366 endorsement

Geary McDowell
 

Hey Bob, KK6KMU, thank you.  I am NOT a contester or award seeker.  I just have fun getting on the air when I can be based on conditions (the atmosphere and mine)  HI HI HI.  I'll look for you.  I am going to be on as much as possible to also help others needing a log contact or just the chat.  I started out just making contacts having fun, one day I submitted my log to the log checker and WOW, when did I do all those?  HI HI HI  Since I try to get on several times a week and daily if possible.  You and I have had a few QSOs in the past, but none this year!  We will resolve that.  Thanks for the help and keep having fun, I am.
73 Geary KE5IRK

On Wed, Jun 23, 2021 at 1:19 PM Bob Motyl KK6KMU <bobmotyl@...> wrote:
Geary,

I will be looking for you.  I still need over 60 days.  I'm just taking it one day at a time.

Bob
KK6KMU



--
When all else fails, Amateur Radio works.


IC-7300 with Fldigi - setup for PSK-31

ve3xdb
 

Good evening,

I'm sure this has been addressed somewhere in this forum, but I just spent 30 minutes searching, and couldn't find anything.  I apologize if I have missed something right under my nose.   

I picked up my new Icom IC-7300 yesterday, and it's a nice rig.  Took awhile to figure things out, but I am getting close.  I now have it set up for cw, PSK31 and FT8.  Historically, I have used Kenwood rigs, so this is quite different. 

My question.  Does anyone have a comprehensive source for optimizing PSK31 on the IC7300, using Fldigi and Flrig.  Specifically, I am trying to assess the bandwidth of my transmitted signal, and determine how to clean it up if needed. 

Best regards,

Doug VE3XDB


Re: Trying to wrap up PODX 070 366 endorsement

Geary McDowell
 

Thanks John, glad we made the contact.  After we finished I could see two other station on the waterfall and within two minutes my waterfall on 20 and 40 were blank!  That makes our's special, thanks again.
73 Geary, KE5IRKK

On Wed, Jun 23, 2021 at 1:32 PM John - KC3FL via groups.io <kc3fl=aol.com@groups.io> wrote:

Geary,

Start at 00:00 z.  Propagation on 20 is good up to about 02:00 z.  Use the CQ 365 or CQ 366 and any member seeing that will jump on you.

John
KC3FL



--
When all else fails, Amateur Radio works.

1341 - 1360 of 68029