Date   

One hr left. #new

 

Hey I
Got 1 hr remaining need more qso's Calling cq a lot
--
Dave NU4N #1657 73's


STICKERS? #new

 

Have the stickers for the 1st of the year yet? Just asking.

--
Dave NU4N #1657 73's


Re: 40M Firecracker Sprint – Tomorrow !!

JoAnn Donaldson
 

I am on right now. So far I have worked one (1) station in the last hour.

JoAnn
AB8YZ

On Sunday, July 4, 2021, 11:01:19 AM CDT, Tom <tom@...> wrote:


[Edited Message Follows]

Thanks to both you guys. I was really scratching my head. 😎
As it is, 40m is not working for me today, but oh well.


Tom W4FLL


Re: 40M Firecracker Sprint – Tomorrow !!

Tom
 
Edited

Thanks to both you guys. I was really scratching my head. 😎
As it is, 40m is not working for me today, but oh well.

Tom W4FLL


Re: 40M Firecracker Sprint – Tomorrow !!

Jim K5SP
 

Tom, 
That is a result of the server being on PDT and me being in CDT, and the contest being in GMT. 

Every contest I setup that timer, and for some reason there are times when the time conversion gets lost in this 77 year old mind.  Normally W9SMR keeps me on my toes, but apparently he didn't tell me it needed to be corrected. 

I am in Missouri right now (Branson), and don't have my login info to access the server.

BTW, the Jesus performance at the Sight and Sound theater is awesome and worth the trip to Branson!

73

On Sun, Jul 4, 2021 at 7:05 AM, Tom
<tom@...> wrote:
I'm a little confused. Right now it's 1200Z July 4th. Yet the club website says: "The Firecracker Sprint contest is over! Make sure you submit your log by 2359Z 07/11/21."
I thought it ran until 1959Z on July 4th. What am I missing here?

Tom W4FLL

--
Jim,  K5SP #483
Executive Director/Member Services Director


Re: 40M Firecracker Sprint – Tomorrow !!

Stephen Melachrinos
 

Tom -

Ignore that item on the web page. It's auto-generated, and was apparently mis-programmed. 

You do still have a few hours left.

Steve
W3HF


-----Original Message-----
From: Tom <tom@...>
To: main@070Club.groups.io
Sent: Sun, Jul 4, 2021 8:05 am
Subject: Re: [070Club] 40M Firecracker Sprint – Tomorrow !!

I'm a little confused. Right now it's 1200Z July 4th. Yet the club website says: "The Firecracker Sprint contest is over! Make sure you submit your log by 2359Z 07/11/21."
I thought it ran until 1959Z on July 4th. What am I missing here?

Tom W4FLL


Re: 40M Firecracker Sprint – Tomorrow !!

Tom
 

I'm a little confused. Right now it's 1200Z July 4th. Yet the club website says: "The Firecracker Sprint contest is over! Make sure you submit your log by 2359Z 07/11/21."
I thought it ran until 1959Z on July 4th. What am I missing here?

Tom W4FLL


Re: 40M Firecracker Sprint – Tomorrow !!

 

Hi Everybody...
I'm on 40m, CQ'n for the Sprint.
All kinds of bombs and snap, krackles & pops going on outside!

C'mon down...join me?

Milt.
N6MG
070-650
LONP #76



-----Original Message-----
From: stan W9SMR <robinstan@...>
To: main@070Club.groups.io
Sent: Thu, Jul 1, 2021 4:54 pm
Subject: [070Club] 40M Firecracker Sprint – Tomorrow !!

The 070 Club 40m Firecracker Sprint Contest begins tomorrow!

The 24 hour window -
   Opens at:  2000 UTC  Saturday July 3rd
   Closes at: 1959 UTC   Sunday July 4th. 

You choose your best 6 hour block when submitting your entry. 

Open to all licensed amateurs. 

4 categories
– High, Medium, Low, and QRP power. 

Exchange:
State/Province/Country (SPC).

Frequencies:
7.070, 7.074, 7.035 (DX) MHz

Call:
  “CQ 40m Sprint”

LOGS ARE DUE ONE WEEK AFTER THE CONTEST!

Please upload your ADIF file with
  *** CONTEST RECORDS ONLY ***

Full RULES details at: RULES - 40M Firecracker Sprint

Good luck to all and hope to see you on the waterfall!
73,
Stan
W9SMR - 070  #1611
PODXS 070 - PR Director


Re: FLDIGI not decoding. #new

Bob Motyl KK6KMU
 

John,

Yes you are correct the PKT mode does default to LSB.  And yes I have read about the work around but don't have the rig yet to set it up.  Yes I have been told it is a great rig.  There was a problem with the temp switch and the fan didn't come on.  A member of a contest club agreed to go through it before I inherited it.  I hinted that I wanted to install a buffer board and tap the IF.  He agreed to install the buffer board but didn't realize he had to remove most to guts to access the RF board.  If I don't get it in a week or so I'm going to tell him to forget it.  It would be great to have a rig that I can see activity on the band.

Bob


Re: IC7300 UFH Coverage??

Jerry N9AVY
 

I sold my TS-850SAT on Ebay and got low-balled on it, but it needed to go away. Bought it used around 1999-2000 for $1100 from a private party. Sold it for around $650.   Had a brand new in he box SR-8T which I bought new from AES in Milwaukee for $499 but sold it for around $400 after a couple $350 or less offers - hate those low ballers.

Still using FT-1000MP which I bought for around $1100 cash from a well-known area ham in early 2005. Got my money's worth out of it.

Yet, there are still some ops out there who have 10-0 year old radios they think are worth big bucks because they have "sentimental value" ... ohforpityssake !    Far too many hams out there who don't realize that much like cars when you take them home the price falls around 40%.

Lots of good deals on rigs out there, but one has to be extremely careful.


My $1.97 worth ...

Jerry  n9avy


On Saturday, July 3, 2021, 02:39:26 PM CDT, Richard Rohrer <kc3ef@...> wrote:


I guess my attempt at a little humor and commentary on used rig prices missed the mark a little.  I know that the IC7300 is a HF/50mhz rig and does not cover UHF.  I just found it interesting that two major industrial MRO suppliers have branded them as UHF and have them priced at twice what HRO or Gigaparts has them priced at.  I am not sure what industry would purchase these.  One of them even had the entire Icom ham line listed on their website. 
As for used prices, I agree with Jerry, people seem to think 15 or 20 year old radios should be priced at what the paid for them, not as what they are probably worth.  I would not purchase an used radio unless I had a chance to operate it for a bit and never one off of ebay.  I also agree with Jerry on shipping, since if I have to send my IC7410 back to Icom to have it repaired the cost would probably be over $75 since it weights 22.5 lbs.  I have found that major shippers seem to over charge the individual to make up for the discounts they give the big companies. 

Getting ready for the sprint, hope not Tstorms occur. 

73
Dick - KC3EF 


Re: FLDIGI not decoding. #new

Jerry N9AVY
 

John:

In PSK, my FT-1000MP defaults to USB.  It's still work okay and have as yet to hook up IC-7300....someday.

Jerry  n9avy

On Saturday, July 3, 2021, 02:50:09 PM CDT, John - KC3FL via groups.io <kc3fl@...> wrote:


Bob,

Not sure abt the Mark V but my 1000-MP defaults to LSB in the pkt mode.  I setup a user key to use USB in the data mode but it doesn't work on the Mark V.  I'm sure someone out there has a fix for it.  It's a great rig, has two receivers that you can listen to at the same time.  Makes spotting the listening freq. of a station working a split a piece of cake.
John
KC3FL


Re: FLDIGI not decoding. #new

 

Bob,

Not sure abt the Mark V but my 1000-MP defaults to LSB in the pkt mode.  I setup a user key to use USB in the data mode but it doesn't work on the Mark V.  I'm sure someone out there has a fix for it.  It's a great rig, has two receivers that you can listen to at the same time.  Makes spotting the listening freq. of a station working a split a piece of cake.
John
KC3FL


Re: IC7300 UFH Coverage??

Richard Rohrer
 

I guess my attempt at a little humor and commentary on used rig prices missed the mark a little.  I know that the IC7300 is a HF/50mhz rig and does not cover UHF.  I just found it interesting that two major industrial MRO suppliers have branded them as UHF and have them priced at twice what HRO or Gigaparts has them priced at.  I am not sure what industry would purchase these.  One of them even had the entire Icom ham line listed on their website. 
As for used prices, I agree with Jerry, people seem to think 15 or 20 year old radios should be priced at what the paid for them, not as what they are probably worth.  I would not purchase an used radio unless I had a chance to operate it for a bit and never one off of ebay.  I also agree with Jerry on shipping, since if I have to send my IC7410 back to Icom to have it repaired the cost would probably be over $75 since it weights 22.5 lbs.  I have found that major shippers seem to over charge the individual to make up for the discounts they give the big companies. 

Getting ready for the sprint, hope not Tstorms occur. 

73
Dick - KC3EF 


Re: FLDIGI not decoding. #new

Bob Motyl KK6KMU
 

JoAnn,

Yes I'm going to use the West Mountain RIGBlaster.  The only difference is that a club member is currently installing an IF buffer board so I can output the IF to my SDRplay.  I will first interface the Yaesu to FLDIGI to make sure everything works.  Then I will try to use SDRUno and SDRPlay.  I'm a retired engineer but software drives me crazy.  I will take you up on the Yaesu help.

Bob
KK6KMU


Re: FLDIGI not decoding. #new

JoAnn Donaldson
 

I used to use a FT-1000MP-V, so I can real help is it's settings. What kind of interface are you using. I used to use the West Mountain Sound Card Interface.
I am currently using a Flex 6400M and the interfacing with it is done entirely thru it's interface.

JoAnn
AB8YZ

On Saturday, July 3, 2021, 2:03:40 PM CDT, Bob Motyl KK6KMU <bobmotyl@...> wrote:


JoAnn,

Completely agree.  Your specific rig settings can be frustrating also.  I have a IC-7200 and I tried all the FLDIGI rig control methods.  I have finally have gone to using FLRIG for rig control.  With a little macro programming in FLRIG I now almost never touch the rig.  I'm soon to inherit a Yaesu FT-1000MP-V.  This will be a test of my patience.  I might even post some of my discoveries during the process.


Bob
KK6KMU 


Re: FLDIGI not decoding. #new

Bob Motyl KK6KMU
 

JoAnn,

Completely agree.  Your specific rig settings can be frustrating also.  I have a IC-7200 and I tried all the FLDIGI rig control methods.  I have finally have gone to using FLRIG for rig control.  With a little macro programming in FLRIG I now almost never touch the rig.  I'm soon to inherit a Yaesu FT-1000MP-V.  This will be a test of my patience.  I might even post some of my discoveries during the process.


Bob
KK6KMU 


Re: FLDIGI not decoding. #new

Bob Motyl KK6KMU
 

John,

I learned something too.

Bob
KK6KMU


Re: IC7300 UFH Coverage??

Ray Clements
 


I have an older ICOM IC-7000 that does HF plus 6 meters, 2 meters and 70 cm. However, my primary radio is the IC-7600.

The newer version of the IC-700 radio is the IC-7100. It does 100 watts on HF and 6 meters, 50 watts on 2 meters, and 25 watts on 70 cm.

The IC-7100 is small enough to be used as a mobile rig, but is capable of serving as a base station.

I know my IC-7000 can get pretty hot if running at full duty cycle modes. I presume the IC-7100 would have heat issues as well. There are a lot of electronics crammed into a small space, so room for heat sinks is limited.

Ray N9RWC

------ Original Message ------
Received: 12:15 PM CDT, 07/03/2021
From: "Jerry N9AVY" <n9avy@...>
To: "main@070Club.groups.io" <main@070club.groups.io>, "main@070Club.groups.io" <main@070Club.groups.io>
Subject: Re: [070Club] IC7300 UFH Coverage??


The 7300 does 160-6m  ... that's it !    Anything UHF bands would require some kind of converter'

Sorry slept in late and brain was fuzzy...  


jerry  n9avy

On Saturday, July 3, 2021, 11:54:48 AM CDT, N6MG - Milt. via groups.io <n6mg@...> wrote:


Dick...
Jerry gave you a lot of words but didn't answer your question.
I also have an Icom IC-7300 that I bought new for this year's upcoming APE season.
It does not cover VHF or UHF.
Were I looking for a previously owned radio, I'd stick with known dealers.
That way, you should have recourse should you not be pleased with the radio.

If you're looking for a radio that has HF & VHF/UHF, that's different. There have been some nice radio's in the past that did that, and if you have patience, you'll be able to find locate one of those through a dealer.
I also have a new Yaesu FT-991A, that is HF, VHF/UHF that I got particularly for its VHF/UHF all mode capability. 

Both the Yaesu and Icom are nice radio's. BUT, The Yaesu FT-991a comes with a useless manual, and is the least intuitive radio I've ever owned. It does have a good receiver.

Neither of the 2 radio's are my prime HF radio, but certainly could be if necessary.

Milt.
N6MG
070-650
LONP #76



-----Original Message-----
From: Jerry N9AVY <n9avy@...>
To: main@070Club.groups.io <main@070Club.groups.io>
Sent: Sat, Jul 3, 2021 9:30 am
Subject: Re: [070Club] IC7300 UFH Coverage??

You should follow the sites with used radio.  If they were built in last decade the prices start at $500 and go up.. up.. up.  Love the comment on some 20 year old radios 'LIKE NEW"... seems like it's either new or not. 
Some folks perception of reality is a bit skewed.   Most want local pickup with cash and will not ship.  Shipping is important because original packing has been tossed and radios need to be double boxed (remember the Samsonite luggage TV ads with the gorillas ?).  

Jerry   n9avy


On Saturday, July 3, 2021, 11:15:28 AM CDT, Richard Rohrer <kc3ef@...> wrote:


I know some of the members have IC7300 and I am curious as to which UHF bands they cover??  Since my IC7410 took a lightning hit I have been looking at new radios if the insurance money comes thru.  One of the major industrial supply companies has then on their website as UHF base radios at the heft price of $2,500.  This confused me, since I thought they were HF/50 radios.  Are these some kind of super IC7300 since they are also about twice the going price, hi hi.  I also so one for same used as a rare Icom radio for $1500 must be better than the new ones from the ham vendors to cost more. 

Just a little humor on rig prices. 
--
Dick - KC3EF
070 - 747



Re: FLDIGI not decoding. #new

JoAnn Donaldson
 

What kind of rig are you interfacing with. A lot of the setup revolves around your Rig settings.

JoAnn
Ab8YZ

On Saturday, July 3, 2021, 1:01:26 PM CDT, John - KC3FL via groups.io <kc3fl@...> wrote:


Bob,
Not only did Dave and Dick learn from our answers, I also learned a few things because I had to poke around areas of Fldigi that I had not yet explored.  Probably a few other folks out there gained a little knowledge also.

John
KC3FL


Re: FLDIGI not decoding. #new

 

Bob,
Not only did Dave and Dick learn from our answers, I also learned a few things because I had to poke around areas of Fldigi that I had not yet explored.  Probably a few other folks out there gained a little knowledge also.

John
KC3FL

1061 - 1080 of 67892