|
FS/KB9AVO
This guy has been hanging around 20m, but seems to make a couple contacts and disappears when he has too many calling him. Suspect he's part of the crew with W9SW who's been operating mostly CW
This guy has been hanging around 20m, but seems to make a couple contacts and disappears when he has too many calling him. Suspect he's part of the crew with W9SW who's been operating mostly CW
|
By
Jerry N9AVY
·
#45120
·
|
|
Re: Yaesu FT-450D and PSK31
Larry,
You’ll like it!
I did enjoy that the radio had a smaller footprint on my desk because of the other radio’s I have on the desk also.
The receiver is very good as I commented
Larry,
You’ll like it!
I did enjoy that the radio had a smaller footprint on my desk because of the other radio’s I have on the desk also.
The receiver is very good as I commented
|
By
N6MG - Milt.
·
#45119
·
|
|
Re: ZF1DM on 15
Surprisingly I enjoyed a HUGE opening on 15m for about 2.5-3 hours. Worked both JTxx and PSK modes and made 17 calls total, 15 of them from different DX entities (meaning no dupe entities and non-US).
Surprisingly I enjoyed a HUGE opening on 15m for about 2.5-3 hours. Worked both JTxx and PSK modes and made 17 calls total, 15 of them from different DX entities (meaning no dupe entities and non-US).
|
By
John Etling
·
#45118
·
|
|
Re: 7X3WPL (Algeria) on 20m
Milt I am with you buddy. Right now the only band I have any traces on is 20, and at this
moment in time, there are only three traces on that band.
It can only get better.
Jim
Milt I am with you buddy. Right now the only band I have any traces on is 20, and at this
moment in time, there are only three traces on that band.
It can only get better.
Jim
|
By
Jim K5SP
·
#45117
·
|
|
Re: Yaesu FT-450D and PSK31
Don,
I just bought a FT-450D, and a Signalink USB, gaven't put it on the
air yet, but working on it.
73, Larry WA7HDZ #404
Don,
I just bought a FT-450D, and a Signalink USB, gaven't put it on the
air yet, but working on it.
73, Larry WA7HDZ #404
|
By
Larry
·
#45116
·
|
|
ZF1DM on 15
Perseverance pays off. After long morning of calling CQ, snagged ZF1DM on 15 meters. Only signal I have heard all day on 15.
Jim, K5SP
Perseverance pays off. After long morning of calling CQ, snagged ZF1DM on 15 meters. Only signal I have heard all day on 15.
Jim, K5SP
|
By
Jim K5SP
·
#45115
·
|
|
Re: 7X3WPL (Algeria) on 20m
Jim, you’re not alone in your observation.
I have very few traces on the higher freq’s.
Though what I do see is very strong...just not many of them.
We are currently experiencing a very strong
Jim, you’re not alone in your observation.
I have very few traces on the higher freq’s.
Though what I do see is very strong...just not many of them.
We are currently experiencing a very strong
|
By
N6MG - Milt.
·
#45114
·
|
|
Re: 7X3WPL (Algeria) on 20m
Texas can take credit for a lot of things, but they cannot claim the title of "RF Black Hole" ... that distinction belongs to the Upper Midwest ! As proved by the flag of the Society of Midwest
Texas can take credit for a lot of things, but they cannot claim the title of "RF Black Hole" ... that distinction belongs to the Upper Midwest ! As proved by the flag of the Society of Midwest
|
By
Jerry N9AVY
·
#45113
·
|
|
Re: 7X3WPL (Algeria) on 20m
I don't hear a thing on 17, 15, 12, 10 here, in a RF void or RF black hole.
Jim, K5SP
I don't hear a thing on 17, 15, 12, 10 here, in a RF void or RF black hole.
Jim, K5SP
|
By
Jim K5SP
·
#45112
·
|
|
Re: 7X3WPL (Algeria) on 20m
Eddie KH6/G4KHG/M is booming in on 15m here in Tennessee.
21.072.479
… I’m just sayin’
73 de K3JAE
John Etling
k3jae@...
070 #1820 LONP #321
PODXS 070 – Nobody Special – Just
Eddie KH6/G4KHG/M is booming in on 15m here in Tennessee.
21.072.479
… I’m just sayin’
73 de K3JAE
John Etling
k3jae@...
070 #1820 LONP #321
PODXS 070 – Nobody Special – Just
|
By
John Etling
·
#45111
·
|
|
Rotor
A couple months ago my rotor suffered the loss of the direction indicator potentiometer; this is one of the weakest links in most CDR rotors. It happened just after my shelf collapsed on cabinet
A couple months ago my rotor suffered the loss of the direction indicator potentiometer; this is one of the weakest links in most CDR rotors. It happened just after my shelf collapsed on cabinet
|
By
Jerry N9AVY
·
#45110
·
|
|
Re: Senegal 6W7/F5NHJ on 15m
Great ! Saw another GA station snag him (KR4AU), but he was down in noise for a while, but came back up several minutes later here in IL.
Glad someone got a Q out of my post. Seems like I have
Great ! Saw another GA station snag him (KR4AU), but he was down in noise for a while, but came back up several minutes later here in IL.
Glad someone got a Q out of my post. Seems like I have
|
By
Jerry N9AVY
·
#45109
·
|
|
Re: Senegal 6W7/F5NHJ on 15m
About the same here in GA, but good enough to get him in the log.
Thanks, Jerry!
73
Matt King
KK4CPS
kk4cps@...
070 #1708 LONP #261
PODXS 070 Club Executive Director
This email has been
About the same here in GA, but good enough to get him in the log.
Thanks, Jerry!
73
Matt King
KK4CPS
kk4cps@...
070 #1708 LONP #261
PODXS 070 Club Executive Director
This email has been
|
By
Matthew King - KK4CPS <mrk.twg@...>
·
#45108
·
|
|
Senegal 6W7/F5NHJ on 15m
Jean is on low end of 15m calling CQ NA. Very weak with QSB here in Illinois, but workable,
Jerry N9AVY
Jean is on low end of 15m calling CQ NA. Very weak with QSB here in Illinois, but workable,
Jerry N9AVY
|
By
Jerry N9AVY
·
#45107
·
|
|
Re: wl7cg on 20M PSK
Hey - I resemble that :) Just signed on to the group. Good DX.
Alan WL7CG
Hey - I resemble that :) Just signed on to the group. Good DX.
Alan WL7CG
|
By
Alan Sorum WL7CG
·
#45106
·
|
|
Re: Yaesu FT-450D and PSK31
I cannot speak for the FTdx1200 but I guarantee it is not something required for the FTdx3000D if that helps.
… I’m just saying’
73 de K3JAE
John Etling
k3jae@...
070 #1820 LONP #321
PODXS
I cannot speak for the FTdx1200 but I guarantee it is not something required for the FTdx3000D if that helps.
… I’m just saying’
73 de K3JAE
John Etling
k3jae@...
070 #1820 LONP #321
PODXS
|
By
John Etling
·
#45105
·
|
|
Re: ACLog 5.3
Jerry – glad to hear you’ve got it fixed! Scott, N3FJP, is one of the good guys. I’ve used ACLog for many years.
- 73 and good DX de Mike, K6MKF, President - NCDXC
Jerry – glad to hear you’ve got it fixed! Scott, N3FJP, is one of the good guys. I’ve used ACLog for many years.
- 73 and good DX de Mike, K6MKF, President - NCDXC
|
By
Mike Flowers
·
#45104
·
|
|
ACLog 5.3
This weekend as I was updating my ACLog records, my computer apparently overheated and shut down. When I powered it back up all those records going back to 1978 were GONE !
Thus, I spent the last 2
This weekend as I was updating my ACLog records, my computer apparently overheated and shut down. When I powered it back up all those records going back to 1978 were GONE !
Thus, I spent the last 2
|
By
Jerry N9AVY
·
#45103
·
|
|
Re: 40M
Watched you get another Cuba in the log but seems no-one can hear me tonight. Oh well.
---In 070@..., <mrk.twg@...> wrote :
I've looked for you, Barry, but I don't see anything.
Shame, I would like
Watched you get another Cuba in the log but seems no-one can hear me tonight. Oh well.
---In 070@..., <mrk.twg@...> wrote :
I've looked for you, Barry, but I don't see anything.
Shame, I would like
|
By
boat.anchor@...
·
#45102
·
|
|
Re: 40M
I've looked for you, Barry, but I don't see anything.
Shame, I would like to have worked you on 40m tonight!
73
Matt
KK4CPS
This email has been sent from a virus-free computer protected by
I've looked for you, Barry, but I don't see anything.
Shame, I would like to have worked you on 40m tonight!
73
Matt
KK4CPS
This email has been sent from a virus-free computer protected by
|
By
Matthew King - KK4CPS <mrk.twg@...>
·
#45101
·
|