Rick, Those numbers look pretty darn good for those frequencies. Do you have any similar measurements for SSB portions of the bands? Thanks. Len, K3LRH

Just worked VA3TPS

Around 1808.1, and I worked him last night, first contact on 160 in about 10 years. -- Jim, K5SP #483 Member Services Director

Now have solid copy on KX4WB, and hit wrong macro and sent CQ on top of him, think he moved. My bad! -- Jim, K5SP #483 Member Services Director

I saw KX4WB a few minutes ago, but let him go because I worked him yesterday. I had to get in the shower and get the cement dust off; those 80 lb bags are heavy and dirty! Where you at,

I am there, calling CQ, don't see anyone else, but some QRM/QRN on this end. -- Jim, K5SP #483 Member Services Director

KX4WB spotted on 160 meters ======================== de N2MLP Brian Monroe County PA ========================

I’m doing it wrong. I started with a beam and a full gallon and now I’m using wire antennas and 20 watts Mike WM4B Sent: Tuesday, January 30, 2018 5:32 PM To: 070Club@groups.io Subject: Re:

As long as it stays the same size, I’ll be happy! Mike WM4B Sent: Tuesday, January 30, 2018 5:17 PM To: 070Club@groups.io Subject: Re: [070Club] Hustler 6BTV It won't grow. Jerry

I mounted a 6BTV with the DXEngineering tilt-over base on top of my taller tin-roofed barn back in 2007 (about 45ft height). After some testing I decided that the tin roof had good enough connections

It won't grow. Jerry n9avy From: Mike Besemer <mwbesemer@...> To: 070Club@groups.io Sent: Tuesday, January 30, 2018 3:01 PM Subject: Re: [070Club] Hustler 6BTV Rick, If you're

I've heard tell that anything lower than 2.1:1 is okay. That was from all the old timers in the 70's. Jerry n9avy From: Rick - N7WE <n7we1980@...> To: 070Club@groups.io Sent: Tuesday,

Nice! I guess I’m qualified… I’m always in the hole some way or another! Well, I just broke ground. Had to find the exact site that was not visible from mama’s chair in the sunroom. I

Golly Mike, I'd really like to help out, but.......I'm not certified to excavate! I once ran into a guy who was a registered professional excavation engineer. No kidding!

Gap Titan DX great antenna

Rick, If you're really looking for something to do, I need a hole dug to plant my Gap Titan DX. Mike WM4B

That's what I did. Started on 10, then 15, readjust 10 and 15 until have both. This did require moving the traps from the factory positioning on the tubes, not just changing the

Rick: Did you start tuning 0n 10m and work your way up to 80/160m ? Just curious. My dual sloper isn't working yet. Jerry From: Rick - N7WE <n7we1980@...> To: 070Club@groups.io Sent:

Dick- I have the Hustler ground mounted over 40 radials of differing length - due to the lot. The shortest is about 15 feet and the longest about 28 feet. The Hustler has DXEngineering 12m and 17m

Sorry guys...I won't be on. The 160m adaptation is down and I'm back to 80-10. I live in an HOA restricted community and am thankful just to be allowed the vertical. I try to get the temporary