Date   

W1SRR CQ POTA from FL

Ron Bosch
 

Just worked him for a rare PSK POTA in the log.

Ron
KE4DRF


Re: Kenwood TS-590SG with Fldigi - help needed with new setup

 

Check YouTube, there's a bunch of videos on how to hook it up for digital

John
KC3FL


Re: Kenwood TS-590SG with Fldigi - help needed with new setup

Steve VA3FLF/KM4FLF
 

Alan,

I am a HRD user but check the TS590 G3NRW resource page at http://g3nrw.net/TS-590/

The USB interface settings are pretty standard for digital interface. 

Steve
2301


On Sep 12, 2021, at 19:58, Alan - KA5VZG <ka5vzg@...> wrote:

My FT-450 bit the dust. I was using it and a Signallink USB with Fldigi v4.1.19. 

I just opened the box for my new Kenwood TS-590SG.  Lots more buttons, dials, and menus than the old Yaesu :-)

I have managed to get the radio hooked up to my antennas, tuner, and PC. 
I have installed Kenwood's Virtual COM Port Driver. (It appears to like COM4)
I have the Kenwood ARCP-590G. radio control program loaded.

Does anyone have a list of setup steps to get the TS-590SG up and running with Fldigi?
The instruction manual is not especially user friendly.


Kenwood TS-590SG with Fldigi - help needed with new setup

Alan - KA5VZG
 

My FT-450 bit the dust. I was using it and a Signallink USB with Fldigi v4.1.19. 

I just opened the box for my new Kenwood TS-590SG.  Lots more buttons, dials, and menus than the old Yaesu :-)

I have managed to get the radio hooked up to my antennas, tuner, and PC. 
I have installed Kenwood's Virtual COM Port Driver. (It appears to like COM4)
I have the Kenwood ARCP-590G. radio control program loaded.

Does anyone have a list of setup steps to get the TS-590SG up and running with Fldigi?
The instruction manual is not especially user friendly.


Re: Grid DN74

Jerry N9AVY
 

Confirmed via Eqsl half hour later !  Wow !


Jerry  n9avy

On Sunday, September 12, 2021, 01:54:36 PM CDT, Dennis Kimrey <dlk1953@...> wrote:


I am trying but can not hear him here in SW MO.
Dennis
W0HL
#2868

On Sunday, September 12, 2021, 01:47:36 PM CDT, Jerry N9AVY <n9avy@...> wrote:


Just worked K0PIR  at Devil's Tower in WY (POTA K-0920)  on 20m PSK31.  He's in DN74  if anyone needs that grid.   


Jerry  N9AVY  #454


Re: Grid DN74

Dennis Kimrey
 

I am trying but can not hear him here in SW MO.
Dennis
W0HL
#2868

On Sunday, September 12, 2021, 01:47:36 PM CDT, Jerry N9AVY <n9avy@...> wrote:


Just worked K0PIR  at Devil's Tower in WY (POTA K-0920)  on 20m PSK31.  He's in DN74  if anyone needs that grid.   


Jerry  N9AVY  #454


Grid DN74

Jerry N9AVY
 

Just worked K0PIR  at Devil's Tower in WY (POTA K-0920)  on 20m PSK31.  He's in DN74  if anyone needs that grid.   


Jerry  N9AVY  #454


Re: New Director

Ken N6PCD
 

Bubba,

Hearty congratulations on your new position! I know that you will do a great job! 👍🏻😁
--
All the best,
Ken N6PCD
070# 801
LONP# 187


Re: New Director

JoAnn Donaldson
 

Congrads Milt. You worked hard to get that position. Keep up the good work.

JoAnn

AB8YZ

On Saturday, September 11, 2021, 12:18:34 PM CDT, Bob Motyl KK6KMU <bobmotyl@...> wrote:


Congratulations Milt.  Thank you for volunteering your time and energy into our club.  Greatly appreciated.

Bob
KK6KMU


Re: W6QP Log today.

JoAnn Donaldson
 

I am on 20N PSK right now but don't see any signals.

JoAnn
AB8YZ


On Friday, September 10, 2021, 03:05:52 PM CDT, N6MG - Milt. via groups.io <n6mg@...> wrote:


I'm there. Was that you working George, N7QU?
Red


-----Original Message-----
From: JoAnn Donaldson via groups.io <joannplano2005@...>
To: main@070Club.groups.io <main@070Club.groups.io>
Sent: Fri, Sep 10, 2021 12:58 pm
Subject: Re: [070Club] W6QP Log today.

I am on 20M PSK right now.

JoAnn
AB8YZ


On Friday, September 10, 2021, 02:50:02 PM CDT, N6MG - Milt. via groups.io <n6mg@...> wrote:


JoAnn, AB8YZ,
That's the qso that I mentioned in my original post yesterday.
I copied your call, responded and got no signal report, no nothing. 
Your signal disappeared somewhere in the Ether waves.
I didn't log it.
Would you like to try again? You're also a new LONP contact for W6QP.
Red
W6QP
070-1454
LONP #207


-----Original Message-----
From: JoAnn Donaldson via groups.io <joannplano2005@...>
To: main@070Club.groups.io <main@070club.groups.io>; main@070Club.groups.io <main@070Club.groups.io>
Sent: Fri, Sep 10, 2021 12:08 pm
Subject: Re: [070Club] W6QP Log today.

I logged him at
W6OP  09/09/2021  19:06 UTC  S-599 R-599  Timeoff 19:12 UTC.

JoAnn
AB8YZ

On Thursday, September 9, 2021, 09:16:50 PM CDT, N6MG - Milt. via groups.io <n6mg@...> wrote:


JoAnn...you've already worked W6QP...it's in your log?
You're not in his log.
Want to give me details and I'll check again?
Milt.
N6MG
W6QP - Trustee


-----Original Message-----
From: JoAnn Donaldson via groups.io <joannplano2005@...>
To: main@070Club.groups.io
Sent: Thu, Sep 9, 2021 6:58 pm
Subject: Re: [070Club] W6QP Log today.

Already got him. Joann AB8YZ 

On Sep 9, 2021 6:07 PM, "N6MG - Milt. via groups.io" <n6mg@...> wrote:
AB8YZ, JoAnn. You were strong on the waterfall today, then disappeared. 
SFI is 101, w/no storms. Maybe I was expecting too much.
Red
W6QP
070-1454
LONP #207


Re: New Director

Bob Motyl KK6KMU
 

Congratulations Milt.  Thank you for volunteering your time and energy into our club.  Greatly appreciated.

Bob
KK6KMU


Re: New Director

Don - KM4UDX
 

Thank you Milt. Your work makes this a great group. Thanks again. 


Don

km4udx
uBITX crazy


Re: New Director

JEFF WALSH
 

Congrats Milt !!!
Many Thanks for taking on the job !!
it is members like you and many others that make this a Great Organization !!

JEFF WALSH
W3WMU
#1673
BUBBAWOOD
WORLDWIDE HEADQUARTERS
STURGIS, MS.


On Friday, September 10, 2021, 07:21:30 PM CDT, Barry VA7GEM via groups.io <boat.anchor@...> wrote:


Milt
Congrads on the new position.
Hope you will still have a bit of time to get on the air.
TVM
Barry


Jay Hudak Memorial 80M Sprint Logs Due

stan W9SMR
 

Logs for the Jay Hudak Memorial 80M Sprint are due Sunday, September 12. 

 

If you haven’t uploaded yet, please do so.

 

Upload only your Contest Log at: Jay Hudak Uploader

 

And start thinking about your participation in the next PODXS 070 Event:

 

160M GREAT PUMPKIN SPRINT

Saturday October 9 to Sunday October 10

See Rules at:

 RULES: 160M Great Pumpkin Sprint

73,
Stan

W9SMR - 070  #1611

PODXS 070 - PR Director


Re: New Director

Barry VA7GEM
 

Milt
Congrads on the new position.
Hope you will still have a bit of time to get on the air.
TVM
Barry


Re: W6QP Log today.

 

I'm there. Was that you working George, N7QU?
Red


-----Original Message-----
From: JoAnn Donaldson via groups.io <joannplano2005@...>
To: main@070Club.groups.io <main@070Club.groups.io>
Sent: Fri, Sep 10, 2021 12:58 pm
Subject: Re: [070Club] W6QP Log today.

I am on 20M PSK right now.

JoAnn
AB8YZ


On Friday, September 10, 2021, 02:50:02 PM CDT, N6MG - Milt. via groups.io <n6mg@...> wrote:


JoAnn, AB8YZ,
That's the qso that I mentioned in my original post yesterday.
I copied your call, responded and got no signal report, no nothing. 
Your signal disappeared somewhere in the Ether waves.
I didn't log it.
Would you like to try again? You're also a new LONP contact for W6QP.
Red
W6QP
070-1454
LONP #207


-----Original Message-----
From: JoAnn Donaldson via groups.io <joannplano2005@...>
To: main@070Club.groups.io <main@070club.groups.io>; main@070Club.groups.io <main@070Club.groups.io>
Sent: Fri, Sep 10, 2021 12:08 pm
Subject: Re: [070Club] W6QP Log today.

I logged him at
W6OP  09/09/2021  19:06 UTC  S-599 R-599  Timeoff 19:12 UTC.

JoAnn
AB8YZ

On Thursday, September 9, 2021, 09:16:50 PM CDT, N6MG - Milt. via groups.io <n6mg@...> wrote:


JoAnn...you've already worked W6QP...it's in your log?
You're not in his log.
Want to give me details and I'll check again?
Milt.
N6MG
W6QP - Trustee


-----Original Message-----
From: JoAnn Donaldson via groups.io <joannplano2005@...>
To: main@070Club.groups.io
Sent: Thu, Sep 9, 2021 6:58 pm
Subject: Re: [070Club] W6QP Log today.

Already got him. Joann AB8YZ 

On Sep 9, 2021 6:07 PM, "N6MG - Milt. via groups.io" <n6mg@...> wrote:
AB8YZ, JoAnn. You were strong on the waterfall today, then disappeared. 
SFI is 101, w/no storms. Maybe I was expecting too much.
Red
W6QP
070-1454
LONP #207


Re: W6QP Log today.

JoAnn Donaldson
 

I am on 20M PSK right now.

JoAnn
AB8YZ


On Friday, September 10, 2021, 02:50:02 PM CDT, N6MG - Milt. via groups.io <n6mg@...> wrote:


JoAnn, AB8YZ,
That's the qso that I mentioned in my original post yesterday.
I copied your call, responded and got no signal report, no nothing. 
Your signal disappeared somewhere in the Ether waves.
I didn't log it.
Would you like to try again? You're also a new LONP contact for W6QP.
Red
W6QP
070-1454
LONP #207


-----Original Message-----
From: JoAnn Donaldson via groups.io <joannplano2005@...>
To: main@070Club.groups.io <main@070club.groups.io>; main@070Club.groups.io <main@070Club.groups.io>
Sent: Fri, Sep 10, 2021 12:08 pm
Subject: Re: [070Club] W6QP Log today.

I logged him at
W6OP  09/09/2021  19:06 UTC  S-599 R-599  Timeoff 19:12 UTC.

JoAnn
AB8YZ

On Thursday, September 9, 2021, 09:16:50 PM CDT, N6MG - Milt. via groups.io <n6mg@...> wrote:


JoAnn...you've already worked W6QP...it's in your log?
You're not in his log.
Want to give me details and I'll check again?
Milt.
N6MG
W6QP - Trustee


-----Original Message-----
From: JoAnn Donaldson via groups.io <joannplano2005@...>
To: main@070Club.groups.io
Sent: Thu, Sep 9, 2021 6:58 pm
Subject: Re: [070Club] W6QP Log today.

Already got him. Joann AB8YZ 

On Sep 9, 2021 6:07 PM, "N6MG - Milt. via groups.io" <n6mg@...> wrote:
AB8YZ, JoAnn. You were strong on the waterfall today, then disappeared. 
SFI is 101, w/no storms. Maybe I was expecting too much.
Red
W6QP
070-1454
LONP #207


Re: W6QP Log today.

 

JoAnn, AB8YZ,
That's the qso that I mentioned in my original post yesterday.
I copied your call, responded and got no signal report, no nothing. 
Your signal disappeared somewhere in the Ether waves.
I didn't log it.
Would you like to try again? You're also a new LONP contact for W6QP.
Red
W6QP
070-1454
LONP #207


-----Original Message-----
From: JoAnn Donaldson via groups.io <joannplano2005@...>
To: main@070Club.groups.io <main@070club.groups.io>; main@070Club.groups.io <main@070Club.groups.io>
Sent: Fri, Sep 10, 2021 12:08 pm
Subject: Re: [070Club] W6QP Log today.

I logged him at
W6OP  09/09/2021  19:06 UTC  S-599 R-599  Timeoff 19:12 UTC.

JoAnn
AB8YZ

On Thursday, September 9, 2021, 09:16:50 PM CDT, N6MG - Milt. via groups.io <n6mg@...> wrote:


JoAnn...you've already worked W6QP...it's in your log?
You're not in his log.
Want to give me details and I'll check again?
Milt.
N6MG
W6QP - Trustee


-----Original Message-----
From: JoAnn Donaldson via groups.io <joannplano2005@...>
To: main@070Club.groups.io
Sent: Thu, Sep 9, 2021 6:58 pm
Subject: Re: [070Club] W6QP Log today.

Already got him. Joann AB8YZ 

On Sep 9, 2021 6:07 PM, "N6MG - Milt. via groups.io" <n6mg@...> wrote:
AB8YZ, JoAnn. You were strong on the waterfall today, then disappeared. 
SFI is 101, w/no storms. Maybe I was expecting too much.
Red
W6QP
070-1454
LONP #207


Re: W6QP Log today.

JoAnn Donaldson
 

I logged him at
W6OP  09/09/2021  19:06 UTC  S-599 R-599  Timeoff 19:12 UTC.

JoAnn
AB8YZ

On Thursday, September 9, 2021, 09:16:50 PM CDT, N6MG - Milt. via groups.io <n6mg@...> wrote:


JoAnn...you've already worked W6QP...it's in your log?
You're not in his log.
Want to give me details and I'll check again?
Milt.
N6MG
W6QP - Trustee


-----Original Message-----
From: JoAnn Donaldson via groups.io <joannplano2005@...>
To: main@070Club.groups.io
Sent: Thu, Sep 9, 2021 6:58 pm
Subject: Re: [070Club] W6QP Log today.

Already got him. Joann AB8YZ 

On Sep 9, 2021 6:07 PM, "N6MG - Milt. via groups.io" <n6mg@...> wrote:
AB8YZ, JoAnn. You were strong on the waterfall today, then disappeared. 
SFI is 101, w/no storms. Maybe I was expecting too much.
Red
W6QP
070-1454
LONP #207


Re: New Director

KN4ZXG
 

Congratulations, Milt.  And thanks a lot for all the work you've already done up to this point!

661 - 680 of 68333