Date   

Re: Serious question

Eric KG6MZS
 

Jerry,

From what I have seen those reports are generated by programs like DM-780.  They fail to discriminate between empty rails and whatever else they may be receiving at any given time, so I think they are pretty meaningless.  For instance: right now I have DM-780 on 20m and when I put the cursor on the background with no signals, DM-780 reports -30db IMD and a 32db s/n.  Those would be good numbers on an actual signal, but utterly meaningless on background noise.


Another country heard from

73

Eric

KG6MZS

On 12/27/20 11:10 AM, Jerry N9AVY wrote:
I see stations giving out S/N  and IMD reports.  Tend to ignore them, but have always wondered if they really have any value or are just filler.   

If a station can make contact with me that's usually good enough for me.  If someone gets a 599 report from me, it's because the 599 is given to everyone and I seldom deviate from that. (No one gets offended that way, ha-ha !)

Jerry   n9avy


Re: ACLog

Dan Morris - KZ3T
 

There is a little know program called ‘Award Tracker’ by W5DJT, David. It handles a number of logs including ACLog and will do different lookups.  With said, with a trace of SQLite queries you are able to pull out anything you want from ACLog. So, If you only need certain data fields then Award Tracker would be a great little program to try out.  And of course it is free and if any problems on queries, David generally will help out and do the query for you.  I have used it many times in the past for a bunch of different 10-10 queries as well as several P070 queries.  So, it will pull anything you want based on the query you create.

Dan Morris  KZ3T  070-1065

I live to live for Him!




On Dec 27, 2020, at 7:31 PM, Josef 'Jeff' Sipek <jeffpc@...> wrote:

On Sun, Dec 27, 2020 at 22:22:44 +0000, Stephen Melachrinos via groups.io wrote:
Does anyone use ACLog? I'm trying to help someone figure out how to
extract their Christmas Run log.
Specifically, we need instructions on how to export a file that:
- only has QSOs from 12/25/2020- only has PSK31 QSOs- only has the Date,
Time, Callsign, Mode, Freq or Band fields- is either .txt, .prn, .csx,
.xls, etc
If you can help, please post the instructions here. Thanks.

Even if the software doesn't allow all the fancy filtering for csv or txt
export, it isn't too difficult to use the command line (namely 'grep' or
'awk') or something like Excel to throw away the rows and columns that don't
fit the requirements for the Christmas Run log.

This might be easier than fighting with some of the logging programs.

Jeff.







Christmas Run

Stephen Melachrinos
 

Thanks to everyone for your suggestions about ACLog. We have it figured out.

Now to everyone else who has not yet sent in your log, don't wait! Send it in soon!

Steve
W3HF


-----Original Message-----
From: Stephen Melachrinos via groups.io <melachri@...>
To: main@070club.groups.io <main@070club.groups.io>
Sent: Sun, Dec 27, 2020 5:22 pm
Subject: [070Club] ACLog

Does anyone use ACLog? I'm trying to help someone figure out how to extract their Christmas Run log.

Specifically, we need instructions on how to export a file that:

- only has QSOs from 12/25/2020
- only has PSK31 QSOs
- only has the Date, Time, Callsign, Mode, Freq or Band fields
- is either .txt, .prn, .csx, .xls, etc

If you can help, please post the instructions here. Thanks.

73,
Steve
W3HF


Christmas Run

Stephen Melachrinos
 

Thanks to everyone for your suggestions about ACLog. We have it figured out.

Now to everyone else who has not yet sent in your log, don't wait! Send it in soon!

Steve
W3HF


-----Original Message-----
From: Stephen Melachrinos via groups.io <melachri@...>
To: main@070club.groups.io <main@070club.groups.io>
Sent: Sun, Dec 27, 2020 5:22 pm
Subject: [070Club] ACLog

Does anyone use ACLog? I'm trying to help someone figure out how to extract their Christmas Run log.

Specifically, we need instructions on how to export a file that:

- only has QSOs from 12/25/2020
- only has PSK31 QSOs
- only has the Date, Time, Callsign, Mode, Freq or Band fields
- is either .txt, .prn, .csx, .xls, etc

If you can help, please post the instructions here. Thanks.

73,
Steve
W3HF


Re: ACLog

Josef 'Jeff' Sipek
 

On Sun, Dec 27, 2020 at 22:22:44 +0000, Stephen Melachrinos via groups.io wrote:
Does anyone use ACLog? I'm trying to help someone figure out how to
extract their Christmas Run log.
Specifically, we need instructions on how to export a file that:
- only has QSOs from 12/25/2020- only has PSK31 QSOs- only has the Date,
Time, Callsign, Mode, Freq or Band fields- is either .txt, .prn, .csx,
.xls, etc
If you can help, please post the instructions here. Thanks.
Even if the software doesn't allow all the fancy filtering for csv or txt
export, it isn't too difficult to use the command line (namely 'grep' or
'awk') or something like Excel to throw away the rows and columns that don't
fit the requirements for the Christmas Run log.

This might be easier than fighting with some of the logging programs.

Jeff.


First PSK31 QSO since March 2019

meikol <meikol@...>
 

Hi all -

Due to many factors I haven't done much PSKing the last couple of years.  Today I put up a new 20m dipole and while trying it out I saw 4 or 5 bright traces in the waterfall.  Called CQ once and Kent, K7YXZ, came right back to me.  We had a great 30+ minute QSO.  A very nice way to get back into PSK31.

--
73 - Mike N6STA  070 # 1516


Re: Signalink USB

Paul Butzi (W7PFB)
 

The SignaLink USB PTT control works exactly as you have described.  It’s essentially VOX based on the audio coming from the computer.

The nice thing about the SignaLink USB is that you can just buy a cable and internal jumper plug to match your radio, put the plug in the socket inside, connect the cable that runs to your radio, connect a USB cable, and you’re in business.

-p W7PFB
73, Don’t forget to smile and have fun!

On Dec 27, 2020, at 3:50 PM, Stephen Melachrinos via groups.io <melachri@...> wrote:

I don't need CAT. I had previously said that rig control wasn't a goal (at least not now).

From what I read in the manual on pages 6 and 7


it has an internal PTT that's VOX-like (in my words). It detects the audio coming from the computer and triggers the PTT line to the radio.

Steve
W3HF


-----Original Message-----
From: David, K9DWR <david@...>
To: main@070Club.groups.io
Sent: Sun, Dec 27, 2020 11:29 pm
Subject: Re: [070Club] Signalink USB


> On Dec 27, 2020, at 12:28, Stephen Melachrinos via groups.io <melachri=verizon.net@groups.io> wrote:
> 
> Lauri -
> 
> Understood. The simplification comes from the fact that right now I have three cables from the computer to the interface: Tx audio, Rx audio, and PTT (which is a USB-to-RS232 adapter connected to the RS232 input on the adapter). Consolidating that mess into a single USB is one of the goals.

Actually, the SignaLink likely will not meet that goal. It will be one USB for the audio to the SignaLink, but CAT control is not something the SignaLink does.  You would still need a second cable for CAT control.

https://tigertronics.com/slusbfaq.htm#Can%20I%20use%20the%20SignaLink%20USB%20to%20control%20my%20radio,%20or%20will%20I%20need%20a%20separate%20CAT%20interface?



David, K9DWR
#1604 LONP #255
david@...







Re: Signalink USB

David, K9DWR
 

On Dec 27, 2020, at 17:50, Stephen Melachrinos via groups.io <melachri=verizon.net@groups.io> wrote:

I don't need CAT. I had previously said that rig control wasn't a goal (at least not now).

From what I read in the manual on pages 6 and 7

http://www.tigertronics.com/files/slusbman.pdf

it has an internal PTT that's VOX-like (in my words). It detects the audio coming from the computer and triggers the PTT line to the radio.
Yes, it will definitely PTT from the software for you. I just didn’t want you expecting CAT control as well.



David, K9DWR
#1604 LONP #255
david@graniteweb.com


Re: Signalink USB

Stephen Melachrinos
 

I don't need CAT. I had previously said that rig control wasn't a goal (at least not now).

From what I read in the manual on pages 6 and 7


it has an internal PTT that's VOX-like (in my words). It detects the audio coming from the computer and triggers the PTT line to the radio.

Steve
W3HF


-----Original Message-----
From: David, K9DWR <david@...>
To: main@070Club.groups.io
Sent: Sun, Dec 27, 2020 11:29 pm
Subject: Re: [070Club] Signalink USB


> On Dec 27, 2020, at 12:28, Stephen Melachrinos via groups.io <melachri=verizon.net@groups.io> wrote:
>
> Lauri -
>
> Understood. The simplification comes from the fact that right now I have three cables from the computer to the interface: Tx audio, Rx audio, and PTT (which is a USB-to-RS232 adapter connected to the RS232 input on the adapter). Consolidating that mess into a single USB is one of the goals.

Actually, the SignaLink likely will not meet that goal. It will be one USB for the audio to the SignaLink, but CAT control is not something the SignaLink does.  You would still need a second cable for CAT control.

https://tigertronics.com/slusbfaq.htm#Can%20I%20use%20the%20SignaLink%20USB%20to%20control%20my%20radio,%20or%20will%20I%20need%20a%20separate%20CAT%20interface?



David, K9DWR
#1604 LONP #255
david@...






Re: Signalink USB

David, K9DWR
 

On Dec 27, 2020, at 12:28, Stephen Melachrinos via groups.io <melachri=verizon.net@groups.io> wrote:

Lauri -

Understood. The simplification comes from the fact that right now I have three cables from the computer to the interface: Tx audio, Rx audio, and PTT (which is a USB-to-RS232 adapter connected to the RS232 input on the adapter). Consolidating that mess into a single USB is one of the goals.
Actually, the SignaLink likely will not meet that goal. It will be one USB for the audio to the SignaLink, but CAT control is not something the SignaLink does. You would still need a second cable for CAT control.

https://tigertronics.com/slusbfaq.htm#Can%20I%20use%20the%20SignaLink%20USB%20to%20control%20my%20radio,%20or%20will%20I%20need%20a%20separate%20CAT%20interface?



David, K9DWR
#1604 LONP #255
david@graniteweb.com


Re: ACLog

Steve McEdwards
 

Hi Steve,
If you search putting psk31 in mode box and then highlight the qso's from December 25.you should then be able to export Adif file under the export section.I have done it this way for some of our contest.
Hope it helps HNY
73  de Steve
VA3TPS


On Sun., 27 Dec. 2020 at 5:22 p.m., Stephen Melachrinos via groups.io
<melachri@...> wrote:
Does anyone use ACLog? I'm trying to help someone figure out how to extract their Christmas Run log.

Specifically, we need instructions on how to export a file that:

- only has QSOs from 12/25/2020
- only has PSK31 QSOs
- only has the Date, Time, Callsign, Mode, Freq or Band fields
- is either .txt, .prn, .csx, .xls, etc

If you can help, please post the instructions here. Thanks.

73,
Steve
W3HF


Re: ACLog

Leland Sly
 

I use AC Log when I operate portable.  I then import my contacts to my "Master" log in HRD.  The way I got my report for the Christmas event was to export an ADIF file of the contacts I made.  Then I used the ADIF Master program to delete the fields I did not want.  Then saved that file as a CSV file.  That is a text file that should be exactly what the doctor ordered.

I don't know how to do it in one step.

73

Lee N5SLY

On Sun, Dec 27, 2020 at 4:22 PM Stephen Melachrinos via groups.io <melachri=verizon.net@groups.io> wrote:
Does anyone use ACLog? I'm trying to help someone figure out how to extract their Christmas Run log.

Specifically, we need instructions on how to export a file that:

- only has QSOs from 12/25/2020
- only has PSK31 QSOs
- only has the Date, Time, Callsign, Mode, Freq or Band fields
- is either .txt, .prn, .csx, .xls, etc

If you can help, please post the instructions here. Thanks.

73,
Steve
W3HF


Re: Signalink USB

Paul Butzi (W7PFB)
 

“No annoying clutter on the table” has ten syllables, the right number of syllables for a sonnet although the syllable emphasis is wonky for iambic pentameter.  I will leave it up to you to write the remaining 13 lines.

I love sonnets, although I’m complete rubbish at writing them.

-p W7PFB
73, Don’t forget to smile and have fun!

On Dec 27, 2020, at 2:06 PM, Ron Bosch <boschfamily@...> wrote:

I would write a sonnet to my IC-7100, but English 101 was a long time ago, and I can't remember the form, plus how would I rhyme "one USB cable"? :-)

73
Ron
KE4DRF

On Sun, Dec 27, 2020 at 12:28 PM Stephen Melachrinos via groups.io <melachri=verizon.net@groups.io> wrote:
Lauri -

Understood. The simplification comes from the fact that right now I have three cables from the computer to the interface: Tx audio, Rx audio, and PTT (which is a USB-to-RS232 adapter connected to the RS232 input on the adapter). Consolidating that mess into a single USB is one of the goals.

Steve 


-----Original Message-----
From: Lauri Lundgren <n1ukxradio@...>
To: main@070Club.groups.io
Sent: Sun, Dec 27, 2020 11:06 am
Subject: Re: [070Club] Signalink USB

You're going to need at least 2 cables.  The USB cable is between the SignaLink and the computer, and then you'll need a cable from the SignaLink to the radio.




ACLog

Stephen Melachrinos
 

Does anyone use ACLog? I'm trying to help someone figure out how to extract their Christmas Run log.

Specifically, we need instructions on how to export a file that:

- only has QSOs from 12/25/2020
- only has PSK31 QSOs
- only has the Date, Time, Callsign, Mode, Freq or Band fields
- is either .txt, .prn, .csx, .xls, etc

If you can help, please post the instructions here. Thanks.

73,
Steve
W3HF


Re: Signalink USB

Jerry N9AVY
 

"under the table "   ???

On Sunday, December 27, 2020, 04:06:57 PM CST, Ron Bosch <boschfamily@...> wrote:


I would write a sonnet to my IC-7100, but English 101 was a long time ago, and I can't remember the form, plus how would I rhyme "one USB cable"? :-)

73
Ron
KE4DRF

On Sun, Dec 27, 2020 at 12:28 PM Stephen Melachrinos via groups.io <melachri=verizon.net@groups.io> wrote:
Lauri -

Understood. The simplification comes from the fact that right now I have three cables from the computer to the interface: Tx audio, Rx audio, and PTT (which is a USB-to-RS232 adapter connected to the RS232 input on the adapter). Consolidating that mess into a single USB is one of the goals.

Steve 


-----Original Message-----
From: Lauri Lundgren <n1ukxradio@...>
To: main@070Club.groups.io
Sent: Sun, Dec 27, 2020 11:06 am
Subject: Re: [070Club] Signalink USB

You're going to need at least 2 cables.  The USB cable is between the SignaLink and the computer, and then you'll need a cable from the SignaLink to the radio.


Re: Signalink USB

Ron Bosch
 

I would write a sonnet to my IC-7100, but English 101 was a long time ago, and I can't remember the form, plus how would I rhyme "one USB cable"? :-)

73
Ron
KE4DRF


On Sun, Dec 27, 2020 at 12:28 PM Stephen Melachrinos via groups.io <melachri=verizon.net@groups.io> wrote:
Lauri -

Understood. The simplification comes from the fact that right now I have three cables from the computer to the interface: Tx audio, Rx audio, and PTT (which is a USB-to-RS232 adapter connected to the RS232 input on the adapter). Consolidating that mess into a single USB is one of the goals.

Steve 


-----Original Message-----
From: Lauri Lundgren <n1ukxradio@...>
To: main@070Club.groups.io
Sent: Sun, Dec 27, 2020 11:06 am
Subject: Re: [070Club] Signalink USB

You're going to need at least 2 cables.  The USB cable is between the SignaLink and the computer, and then you'll need a cable from the SignaLink to the radio.


Re: Serious question

Josef 'Jeff' Sipek
 

On Sun, Dec 27, 2020 at 19:10:31 +0000, Jerry N9AVY wrote:
I see stations giving out S/N  and IMD reports.  Tend to ignore them, but
have always wondered if they really have any value or are just filler.   
I find them useful. They give me a more accurate idea of what my signal
looks like on the waterfall - and since they are generated automatically,
there is less operator interpretation.

I think the fldigi manual talks a about what the two numbers mean, but the
rule of thumb KC3FL told me when I started with fldigi, was that S/N should
be equal to the the negated IMD for "perfect" signal. For example,

- 30dB S/N & -30dB IMD is great
- 30dB S/N & -15dB IMD means that I'm a bit wider than I should be

Technically, this info is contained in the RSQ, but like many I tend to
leave it at 599 unless something warrants changing it.

If a station can make contact with me that's usually good enough for me. 
And that's fine too, after all - it is 'only' a hobby. :)

Jeff (AC1JR).


Re: Serious question

Paul Butzi (W7PFB)
 

I find the S/N number more useful than ‘599’, as pretty much everyone sends 599 for signal reports unless something really unusual is happening.

I try to override the default 599 and send actual signal reports but I confess I often fail to do so.

-p W7PFB
73, Don’t forget to smile and have fun!

On Dec 27, 2020, at 11:10 AM, Jerry N9AVY <n9avy@...> wrote:

I see stations giving out S/N  and IMD reports.  Tend to ignore them, but have always wondered if they really have any value or are just filler.   

If a station can make contact with me that's usually good enough for me.  If someone gets a 599 report from me, it's because the 599 is given to everyone and I seldom deviate from that. (No one gets offended that way, ha-ha !)

Jerry   n9avy


Serious question

Jerry N9AVY
 

I see stations giving out S/N  and IMD reports.  Tend to ignore them, but have always wondered if they really have any value or are just filler.   

If a station can make contact with me that's usually good enough for me.  If someone gets a 599 report from me, it's because the 599 is given to everyone and I seldom deviate from that. (No one gets offended that way, ha-ha !)

Jerry   n9avy


Re: 25 contacts on 20m

Jerry N9AVY
 

Michael:

No problem.  Figured out you were in AZ from the /7  identifier.  Made correction in my log.  You signal was good enough to get name & signal report; then everything went to pot with your signal.

BTW, you down the road from my old friend Dale , WA9ENA, who is up kind of Northeast from you. Looks to be a short distance on the map, but maps are misleading - ha-ha !

Also, don't need your Grid, but need grids further West; so don't sweat it..  Another 9-land friend is around Sioux Falls, but never hear him.

73,  Jerry n9avy



On Sunday, December 27, 2020, 12:43:28 PM CST, Michael KE0CEN <mlhagema@...> wrote:


Jerry,
   Well, I wrote a detailed reply to this post, then my browser crashed before I could send it. Very sorry for the miscommunication Jerry. I was operating as KE0CEN/7 as I was in Phoenix, Az on vacation. I was trying to tell you I was NOT in Iowa, but the NOT part got lost in the ether. So I was in Az when we made contact. I will try very hard to make contact next time I see your call from home, it is easy to remember.

  Again, sorry for any part I played in the confusion and congrats on the 25, I worked about 3 hours and only got 11, but had fun trying.



73,

   Michael KE0CEN

2101 - 2120 of 67019