Date   

Re: contact 362

W7RIV
 

Did you get anyone? I'm sitting near the radio if you need a last attempt

Bryon, W7RIV


On Thu, Dec 27, 2018 at 4:53 PM Paul Milward <nu4c@...> wrote:
Hi fellow 070ers
I will be calling CQ in a few moments mostly on 40m and I can QSY to 80m easily. I currently have 361 days covered with at least 1 QSO. 12/28 will be day 362 and will it begin in just a few minutes at the top of the hour. If you hear me please answer and of course I will be looking for anyone calling CQ
TIA and 73
Paul NU4C #824


contact 362

Paul Milward <nu4c@...>
 

Hi fellow 070ers
I will be calling CQ in a few moments mostly on 40m and I can QSY to 80m easily. I currently have 361 days covered with at least 1 QSO. 12/28 will be day 362 and will it begin in just a few minutes at the top of the hour. If you hear me please answer and of course I will be looking for anyone calling CQ
TIA and 73
Paul NU4C #824


Re: xmas 25/25

K8TOM
 

Jim,

I saw you several times and tried, but the east-west daytime prop seemed one-way for us in the PNW most of the time.   

The 20M prop improved rather late in the game for us, but it was nice seeing the increased activity on the band.

Tom
K8TOM
815


Re: xmas 25/25

Jim K5SP
 

I managed to get my 25, in between family duties.  Did not start until Christmas morning, was not allowed to get on Christmas EVE.

Never saw Jerry, or anyone in PNW.

Jim K5SP

On 12/27/2018 9:42 AM, Rick - N7WE wrote:
Looks like I missed out on some of the best PSK31 all year!  We traveled to the kids (son, his wife, 4 grand kids, sister, sister-in-law, and my darling wife).  Great family time, but no PSK.  Maybe next year.  Anyway, congrats to all who made 25 and congrats to all who tried but didn't hit 25.  You still beat me, and it sounds like everyone had a grand time!  Hope you all had a Merry Christmas and wishing you all a Happy New Year 2019!
--
Rick - N7WE
070 - #1602

--
Jim,  K5SP #483
Member Services Director


Re: xmas 25/25

Rick - N7WE
 

Looks like I missed out on some of the best PSK31 all year!  We traveled to the kids (son, his wife, 4 grand kids, sister, sister-in-law, and my darling wife).  Great family time, but no PSK.  Maybe next year.  Anyway, congrats to all who made 25 and congrats to all who tried but didn't hit 25.  You still beat me, and it sounds like everyone had a grand time!  Hope you all had a Merry Christmas and wishing you all a Happy New Year 2019!
--
Rick - N7WE
070 - #1602


Re: xmas 25/25

Jerry N9AVY
 

Dave:

 

Think there may have been some one-way propagation because I never saw you.  Would have liked to work you.

 

73,   Jerry  n9avy

 

Sent from Mail for Windows 10

 

From: KB3RAN 1692/381 via Groups.Io
Sent: Thursday, December 27, 2018 9:10 AM
To: 070Club@groups.io
Subject: Re: [070Club] xmas 25/25

 

Jerry, I saw you a few times but could not get you.  Maybe next year.

Dave H
1692/381

 


Re: xmas 25/25

DAVE KB3RAN 1692/381
 

Jerry, I saw you a few times but could not get you.  Maybe next year.

Dave H
1692/381


Re: K8FER Completes 366!

DAVE KB3RAN 1692/381
 

Congratulations Fred.  Only 95 more for me.  I rarely work in Jan or Feb while traveling and taking a cruise and such.  But it might happen sometime.

Dave H
1692/381


7071.10

Jerry N9AVY
 

Just made a couple long CQ’s on 7071.10   but no sign of Paula,  K7PAX.  Did work a station in CT, but it was wrong direction.

 

Jerry  n9avy

 

Sent from Mail for Windows 10

 


Re: QRP Tri-Band & Log Checker

Jerry N9AVY
 

Paula:

 

Am  CQing on 7071 at 0316….but don’t hear anything

 

 

Jerry  n9avy

 

Sent from Mail for Windows 10

 

From: Paula K7PAX #1739 via Groups.Io
Sent: Wednesday, December 26, 2018 7:31 PM
To: 070Club@groups.io
Subject: Re: [070Club] QRP Tri-Band & Log Checker

 

I’m sitting on 7.071.10 right now. There are a couple of other traces on the waterfall, but no one is answering me. I’m just playing solitaire while calling and waiting.

 

Paula K7PAX 1739

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Mike Besemer - WM4B #348
Sent: Wednesday, December 26, 2018 17:28
To: 070Club@groups.io
Subject: Re: [070Club] QRP Tri-Band & Log Checker

 

Thanks Paula, and good luck!

 

Mike

WM4B

#348

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Paula K7PAX #1739 via Groups.Io
Sent: Wednesday, December 26, 2018 7:14 PM
To: 070Club@groups.io
Subject: Re: [070Club] QRP Tri-Band & Log Checker

 

Mike, I still need one more to finish up too. I have 20 and 30 meters. You have inspired me to work on 40 and try to finish that one out. At least it is one that is doable! I bombed on the 25 on 25. Only got 10 QSO’s and had to throw in the towel to give attention to family.

 

Good luck on your QRP endorsement, and Happy Early Anniversary!

 

Paula K7PAX #1739

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Mike Besemer - WM4B #348
Sent: Wednesday, December 26, 2018 13:32
To: 070Club@groups.io
Subject: Re: [070Club] QRP Tri-Band & Log Checker

 

I guess I'll start working on this one. I suppose 20 m 40 m and 80 m are the most likely candidates.

 

Maybe I can knock out one or two this evening. The x y l and I are heading to Savannah tomorrow 4 in early anniversary, and I'll be back on Friday. Seems like they should be pretty easy to do.

 

73,

Mike

WM4B

On Dec 26, 2018 4:13 PM, Mike Besemer - WM4B #348 <mwbesemer@...> wrote:

DUH! I missed the ‘must be two-way QRP’ portion of the endorsement info.

I’m blaming it on a prime-rib, egg nog, whiskey, 3-dogs-in-the-house hangover!

Thanks Paula and Merry Christmas/Happy New Year.

73,

Mike

WM4B

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Paula K7PAX #1739 via Groups.Io
Sent: Wednesday, December 26, 2018 3:54 PM
To: 070Club@groups.io
Subject: Re: [070Club] QRP Tri-Band & Log Checker

Mike, I believe it is looking for RX Power and TX Power. I use HRD Logbook and it does not present a way to enter RX Power (the power the other station is using) in the Add Log window. I have to go into the bulk editor using the “any fields” selection, and add the TX Power and RX Power fields to set the values.

Paula K7PAX 1739

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Mike Besemer - WM4B #348
Sent: Wednesday, December 26, 2018 11:08
To: 070Club@groups.io
Subject: [070Club] QRP Tri-Band & Log Checker

Merry Christmas all,

I have a few contacts in my log which indicate a power level of less than 5-watts, but the Log Checker isn’t picking up on them. What data element/value is it looking for?

73,

Mike

WM4B

#348

 


Re: QRP Tri-Band & Log Checker

Paula K7PAX #1739
 

I’m sitting on 7.071.10 right now. There are a couple of other traces on the waterfall, but no one is answering me. I’m just playing solitaire while calling and waiting.

 

Paula K7PAX 1739

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Mike Besemer - WM4B #348
Sent: Wednesday, December 26, 2018 17:28
To: 070Club@groups.io
Subject: Re: [070Club] QRP Tri-Band & Log Checker

 

Thanks Paula, and good luck!

 

Mike

WM4B

#348

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Paula K7PAX #1739 via Groups.Io
Sent: Wednesday, December 26, 2018 7:14 PM
To: 070Club@groups.io
Subject: Re: [070Club] QRP Tri-Band & Log Checker

 

Mike, I still need one more to finish up too. I have 20 and 30 meters. You have inspired me to work on 40 and try to finish that one out. At least it is one that is doable! I bombed on the 25 on 25. Only got 10 QSO’s and had to throw in the towel to give attention to family.

 

Good luck on your QRP endorsement, and Happy Early Anniversary!

 

Paula K7PAX #1739

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Mike Besemer - WM4B #348
Sent: Wednesday, December 26, 2018 13:32
To: 070Club@groups.io
Subject: Re: [070Club] QRP Tri-Band & Log Checker

 

I guess I'll start working on this one. I suppose 20 m 40 m and 80 m are the most likely candidates.

 

Maybe I can knock out one or two this evening. The x y l and I are heading to Savannah tomorrow 4 in early anniversary, and I'll be back on Friday. Seems like they should be pretty easy to do.

 

73,

Mike

WM4B

On Dec 26, 2018 4:13 PM, Mike Besemer - WM4B #348 <mwbesemer@...> wrote:

DUH! I missed the ‘must be two-way QRP’ portion of the endorsement info.

I’m blaming it on a prime-rib, egg nog, whiskey, 3-dogs-in-the-house hangover!

Thanks Paula and Merry Christmas/Happy New Year.

73,

Mike

WM4B

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Paula K7PAX #1739 via Groups.Io
Sent: Wednesday, December 26, 2018 3:54 PM
To: 070Club@groups.io
Subject: Re: [070Club] QRP Tri-Band & Log Checker

Mike, I believe it is looking for RX Power and TX Power. I use HRD Logbook and it does not present a way to enter RX Power (the power the other station is using) in the Add Log window. I have to go into the bulk editor using the “any fields” selection, and add the TX Power and RX Power fields to set the values.

Paula K7PAX 1739

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Mike Besemer - WM4B #348
Sent: Wednesday, December 26, 2018 11:08
To: 070Club@groups.io
Subject: [070Club] QRP Tri-Band & Log Checker

Merry Christmas all,

I have a few contacts in my log which indicate a power level of less than 5-watts, but the Log Checker isn’t picking up on them. What data element/value is it looking for?

73,

Mike

WM4B

#348


Re: QRP Tri-Band & Log Checker

Mike Besemer - WM4B #348 <mwbesemer@...>
 

Thanks Paula, and good luck!

 

Mike

WM4B

#348

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Paula K7PAX #1739 via Groups.Io
Sent: Wednesday, December 26, 2018 7:14 PM
To: 070Club@groups.io
Subject: Re: [070Club] QRP Tri-Band & Log Checker

 

Mike, I still need one more to finish up too. I have 20 and 30 meters. You have inspired me to work on 40 and try to finish that one out. At least it is one that is doable! I bombed on the 25 on 25. Only got 10 QSO’s and had to throw in the towel to give attention to family.

 

Good luck on your QRP endorsement, and Happy Early Anniversary!

 

Paula K7PAX #1739

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Mike Besemer - WM4B #348
Sent: Wednesday, December 26, 2018 13:32
To: 070Club@groups.io
Subject: Re: [070Club] QRP Tri-Band & Log Checker

 

I guess I'll start working on this one. I suppose 20 m 40 m and 80 m are the most likely candidates.

 

Maybe I can knock out one or two this evening. The x y l and I are heading to Savannah tomorrow 4 in early anniversary, and I'll be back on Friday. Seems like they should be pretty easy to do.

 

73,

Mike

WM4B

On Dec 26, 2018 4:13 PM, Mike Besemer - WM4B #348 <mwbesemer@...> wrote:

DUH! I missed the ‘must be two-way QRP’ portion of the endorsement info.

I’m blaming it on a prime-rib, egg nog, whiskey, 3-dogs-in-the-house hangover!

Thanks Paula and Merry Christmas/Happy New Year.

73,

Mike

WM4B

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Paula K7PAX #1739 via Groups.Io
Sent: Wednesday, December 26, 2018 3:54 PM
To: 070Club@groups.io
Subject: Re: [070Club] QRP Tri-Band & Log Checker

Mike, I believe it is looking for RX Power and TX Power. I use HRD Logbook and it does not present a way to enter RX Power (the power the other station is using) in the Add Log window. I have to go into the bulk editor using the “any fields” selection, and add the TX Power and RX Power fields to set the values.

Paula K7PAX 1739

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Mike Besemer - WM4B #348
Sent: Wednesday, December 26, 2018 11:08
To: 070Club@groups.io
Subject: [070Club] QRP Tri-Band & Log Checker

Merry Christmas all,

I have a few contacts in my log which indicate a power level of less than 5-watts, but the Log Checker isn’t picking up on them. What data element/value is it looking for?

73,

Mike

WM4B

#348


Re: QRP Tri-Band & Log Checker

Paula K7PAX #1739
 

Mike, I still need one more to finish up too. I have 20 and 30 meters. You have inspired me to work on 40 and try to finish that one out. At least it is one that is doable! I bombed on the 25 on 25. Only got 10 QSO’s and had to throw in the towel to give attention to family.

 

Good luck on your QRP endorsement, and Happy Early Anniversary!

 

Paula K7PAX #1739

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Mike Besemer - WM4B #348
Sent: Wednesday, December 26, 2018 13:32
To: 070Club@groups.io
Subject: Re: [070Club] QRP Tri-Band & Log Checker

 

I guess I'll start working on this one. I suppose 20 m 40 m and 80 m are the most likely candidates.

 

Maybe I can knock out one or two this evening. The x y l and I are heading to Savannah tomorrow 4 in early anniversary, and I'll be back on Friday. Seems like they should be pretty easy to do.

 

73,

Mike

WM4B

On Dec 26, 2018 4:13 PM, Mike Besemer - WM4B #348 <mwbesemer@...> wrote:

DUH! I missed the ‘must be two-way QRP’ portion of the endorsement info.

I’m blaming it on a prime-rib, egg nog, whiskey, 3-dogs-in-the-house hangover!

Thanks Paula and Merry Christmas/Happy New Year.

73,

Mike

WM4B

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Paula K7PAX #1739 via Groups.Io
Sent: Wednesday, December 26, 2018 3:54 PM
To: 070Club@groups.io
Subject: Re: [070Club] QRP Tri-Band & Log Checker

Mike, I believe it is looking for RX Power and TX Power. I use HRD Logbook and it does not present a way to enter RX Power (the power the other station is using) in the Add Log window. I have to go into the bulk editor using the “any fields” selection, and add the TX Power and RX Power fields to set the values.

Paula K7PAX 1739

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Mike Besemer - WM4B #348
Sent: Wednesday, December 26, 2018 11:08
To: 070Club@groups.io
Subject: [070Club] QRP Tri-Band & Log Checker

Merry Christmas all,

I have a few contacts in my log which indicate a power level of less than 5-watts, but the Log Checker isn’t picking up on them. What data element/value is it looking for?

73,

Mike

WM4B

#348


Re: QRP Tri-Band & Log Checker

Mike Besemer - WM4B #348 <mwbesemer@...>
 

I guess I'll start working on this one. I suppose 20 m 40 m and 80 m are the most likely candidates.

Maybe I can knock out one or two this evening. The x y l and I are heading to Savannah tomorrow 4 in early anniversary, and I'll be back on Friday. Seems like they should be pretty easy to do.

73,
Mike
WM4B

On Dec 26, 2018 4:13 PM, Mike Besemer - WM4B #348 <mwbesemer@...> wrote:

DUH! I missed the ‘must be two-way QRP’ portion of the endorsement info.

I’m blaming it on a prime-rib, egg nog, whiskey, 3-dogs-in-the-house hangover!

Thanks Paula and Merry Christmas/Happy New Year.

73,

Mike

WM4B

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Paula K7PAX #1739 via Groups.Io
Sent: Wednesday, December 26, 2018 3:54 PM
To: 070Club@groups.io
Subject: Re: [070Club] QRP Tri-Band & Log Checker

Mike, I believe it is looking for RX Power and TX Power. I use HRD Logbook and it does not present a way to enter RX Power (the power the other station is using) in the Add Log window. I have to go into the bulk editor using the “any fields” selection, and add the TX Power and RX Power fields to set the values.

Paula K7PAX 1739

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Mike Besemer - WM4B #348
Sent: Wednesday, December 26, 2018 11:08
To: 070Club@groups.io
Subject: [070Club] QRP Tri-Band & Log Checker

Merry Christmas all,

I have a few contacts in my log which indicate a power level of less than 5-watts, but the Log Checker isn’t picking up on them. What data element/value is it looking for?

73,

Mike

WM4B

#348


Re: QRP Tri-Band & Log Checker

Mike Besemer - WM4B #348 <mwbesemer@...>
 

DUH!  I missed the ‘must be two-way QRP’ portion of the endorsement info. 

 

I’m blaming it on a prime-rib, egg nog, whiskey, 3-dogs-in-the-house hangover!

 

Thanks Paula and Merry Christmas/Happy New Year.

 

73,

 

Mike

WM4B

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Paula K7PAX #1739 via Groups.Io
Sent: Wednesday, December 26, 2018 3:54 PM
To: 070Club@groups.io
Subject: Re: [070Club] QRP Tri-Band & Log Checker

 

Mike, I believe it is looking for RX Power and TX Power. I use HRD Logbook and it does not present a way to enter RX Power (the power the other station is using) in the Add Log window. I have to go into the bulk editor using the “any fields” selection, and add the TX Power and RX Power fields to set the values.

 

Paula K7PAX 1739

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Mike Besemer - WM4B #348
Sent: Wednesday, December 26, 2018 11:08
To: 070Club@groups.io
Subject: [070Club] QRP Tri-Band & Log Checker

 

Merry Christmas all,

I have a few contacts in my log which indicate a power level of less than 5-watts, but the Log Checker isn’t picking up on them.  What data element/value is it looking for?

73,

Mike

WM4B

#348


Re: QRP Tri-Band & Log Checker

Paula K7PAX #1739
 

Mike, I believe it is looking for RX Power and TX Power. I use HRD Logbook and it does not present a way to enter RX Power (the power the other station is using) in the Add Log window. I have to go into the bulk editor using the “any fields” selection, and add the TX Power and RX Power fields to set the values.

 

Paula K7PAX 1739

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Mike Besemer - WM4B #348
Sent: Wednesday, December 26, 2018 11:08
To: 070Club@groups.io
Subject: [070Club] QRP Tri-Band & Log Checker

 

Merry Christmas all,

I have a few contacts in my log which indicate a power level of less than 5-watts, but the Log Checker isn’t picking up on them.  What data element/value is it looking for?

73,

Mike

WM4B

#348


QRP Tri-Band & Log Checker

Mike Besemer - WM4B #348 <mwbesemer@...>
 

Merry Christmas all,

I have a few contacts in my log which indicate a power level of less than 5-watts, but the Log Checker isn’t picking up on them.  What data element/value is it looking for?

73,

Mike

WM4B

#348


Re: xmas 25/25

Fr Richard R
 

As most Eastern Orthodox like the Russian Orthodox (but not all Orthodox like the Greeks) go by the Old Calendar(Julian) which means most things are 13 days different.  

Easter/Pascha is different though. 

Thus 25 December for the Old Calendar is 7 January on the New Calendar (Gregorian). 

Fr Richard 
WB8YXF 

On Dec 26, 2018, at 13:25, Jerry N9AVY <n9avy@...> wrote:

Fr. Richard:

 

Was thinking the 6, but glad you said 7th.   Also had 15th in mind, but think that’s something else.

 

Thanks for correction !

 

73     jerry  n9avy

 

Sent from Mail for Windows 10

 

From: Fr Richard R via Groups.Io
Sent: Wednesday, December 26, 2018 11:25 AM
To: 070Club@groups.io
Subject: Re: [070Club] xmas 25/25

 

Nativity is 7 January ☦️

Fr Richard 


On Dec 26, 2018, at 11:56, Jerry N9AVY <n9avy@...> wrote:

Karl:

 

 

You still won because you added 6 more members to your LONP total.   Between family obligations I tried to get on to help others after making my 25, but didn’t find much.   Perhaps there should be a part 2 to the Xmas 25 by using Orthodox Christmas which is in January ???  

 

Jerry  n9avy

 

 

Sent from Mail for Windows 10

 

From: Karl Heinz Kremer - K5KHK - PODXS 070 # 2645
Sent: Wednesday, December 26, 2018 10:43 AM
To: 070Club@groups.io Group Moderators
Subject: Re: [070Club] xmas 25/25

 

Jerry, 

 

thanks for the club call QSO, but not even that helped me to get close to the 25 threshold - just not enough time between cooking and other family activities. I ended up with 14 valid QSO's (I had one duplicate, so 15 total for Christmas day). Even though I did not get close, I ended up adding six more 070 members to my log - only 37 more to go for LONP :) 

 

Karl Heinz - K5KHK

 

 

 

<3F976D28356444378FFEF8B2169EEED2.png>

 

<B014CBC71258467FAE768E84C976B2DB.png>


Re: xmas 25/25

Jerry N9AVY
 

Fr. Richard:

 

Was thinking the 6, but glad you said 7th.   Also had 15th in mind, but think that’s something else.

 

Thanks for correction !

 

73     jerry  n9avy

 

Sent from Mail for Windows 10

 

From: Fr Richard R via Groups.Io
Sent: Wednesday, December 26, 2018 11:25 AM
To: 070Club@groups.io
Subject: Re: [070Club] xmas 25/25

 

Nativity is 7 January ☦️

Fr Richard 


On Dec 26, 2018, at 11:56, Jerry N9AVY <n9avy@...> wrote:

Karl:

 

 

You still won because you added 6 more members to your LONP total.   Between family obligations I tried to get on to help others after making my 25, but didn’t find much.   Perhaps there should be a part 2 to the Xmas 25 by using Orthodox Christmas which is in January ???  

 

Jerry  n9avy

 

 

Sent from Mail for Windows 10

 

From: Karl Heinz Kremer - K5KHK - PODXS 070 # 2645
Sent: Wednesday, December 26, 2018 10:43 AM
To: 070Club@groups.io Group Moderators
Subject: Re: [070Club] xmas 25/25

 

Jerry, 

 

thanks for the club call QSO, but not even that helped me to get close to the 25 threshold - just not enough time between cooking and other family activities. I ended up with 14 valid QSO's (I had one duplicate, so 15 total for Christmas day). Even though I did not get close, I ended up adding six more 070 members to my log - only 37 more to go for LONP :) 

 

Karl Heinz - K5KHK

 

 

 

<3F976D28356444378FFEF8B2169EEED2.png>

 


Re: xmas 25/25

Fr Richard R
 

Nativity is 7 January ☦️

Fr Richard 

On Dec 26, 2018, at 11:56, Jerry N9AVY <n9avy@...> wrote:

Karl:

 

 

You still won because you added 6 more members to your LONP total.   Between family obligations I tried to get on to help others after making my 25, but didn’t find much.   Perhaps there should be a part 2 to the Xmas 25 by using Orthodox Christmas which is in January ???  

 

Jerry  n9avy

 

 

Sent from Mail for Windows 10

 

From: Karl Heinz Kremer - K5KHK - PODXS 070 # 2645
Sent: Wednesday, December 26, 2018 10:43 AM
To: 070Club@groups.io Group Moderators
Subject: Re: [070Club] xmas 25/25

 

Jerry, 

 

thanks for the club call QSO, but not even that helped me to get close to the 25 threshold - just not enough time between cooking and other family activities. I ended up with 14 valid QSO's (I had one duplicate, so 15 total for Christmas day). Even though I did not get close, I ended up adding six more 070 members to my log - only 37 more to go for LONP :) 

 

Karl Heinz - K5KHK

 

 

 

<3F976D28356444378FFEF8B2169EEED2.png>

8241 - 8260 of 67018