Date   

Re: March 365 - Finish Line in Sight

Dan Morris - KZ3T
 

Thanks for the prayers all.

Dan Morris  KZ3T  070-1065

I live to live for Him!




On Feb 28, 2018, at 3:16 PM, Matthew King - AK4MK <kk4cps@...> wrote:

Best of luck on the knee surgery, Dan. Prayers have been said for ya!

73

Matt
AK4MK

On Wed, Feb 28, 2018 at 9:09 AM, Dan Morris <dbmorris315@...> wrote:
Rick — Well, I will be making a run at the 365 but mine will not finish until Oct, unfortunately.  
I am having total knee surgery tomorrow, however, I do have a March 24th day I need to get.  By then, my knee will be doing well enough I can get on the radio and make my contact. Then I have one in May and a bunch in June/Aug, 2 in Sep and my last 2 will be in OCT.    Only 18 more to go!!!

Dan Morris  KZ3T  070-1065

I live to live for Him!




On Feb 28, 2018, at 8:57 AM, Rick - N7WE <n7we1980@...> wrote:

It's the last day of February and that means it's time to look ahead for the possible finishers of the 365 Endorsement this March.  But there are none.  Good news though!  There are several lining up for an April finish. 

I know there are several out there working to make a contact every day.  And with current propagation it can be tough!  If you are making a run at 365, please post here on the group and there will be lots of us watching the waterfall to help you!

--
Rick - N7WE
070 - #1602







Dan's Knee & March 365 - Finish Line in Sight

 

Dan,

Good luck!

Be sure you ask your Dr if he's took all the courses...& passed all of tests...and didn't get his diploma on the internet, ya know?

Be sure he has a lot of books with pictures in case he get's stuck...

Also,

Be sure, with all of the video monitors in the surgery operating theatre, the MD has YouTube on one of them, ya know?...It's a good source of info for him...plus, no more than 2 cups of coffee...

You and I both live on the edge of town, Dan, and we have to be pretty sharp to live on the edge of town!

Our thoughts and prayers are continuing for you, and others in our 070 family that needs them!!

You'll be up and riding your bicycle and jumping fences in no time at all! I had the old "slash & burn" knee surgery back in '65'...I got over it...and it's a very good predictor of upcoming drops in barometric pressure...Plus I have 2, 3" scars on each side of my left knee cap to be proud of...

I know many of us are hoping and praying you'll do well...

Best 73,

Milt

N6MG

070-650

LONP #76

 

PS...Everybody: Remember this...if you have pain and it hurts...take the pain medicine! That's what it's for!! I don't care if it's OxyC, Norco, Vicodin or whatever...take it if you're hurting!!!

That's the intelligent & smart thing to do!!!

(If someone takes it because it makes him feel good? That's addiction...)

 

 

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Matthew King - AK4MK
Sent: Wednesday, February 28, 2018 12:17 PM
To: 070Club@groups.io
Subject: Re: [070Club] March 365 - Finish Line in Sight

 

Best of luck on the knee surgery, Dan. Prayers have been said for ya!

 

73

 

Matt

AK4MK

 

On Wed, Feb 28, 2018 at 9:09 AM, Dan Morris <dbmorris315@...> wrote:

Rick — Well, I will be making a run at the 365 but mine will not finish until Oct, unfortunately.  

I am having total knee surgery tomorrow, however, I do have a March 24th day I need to get.  By then, my knee will be doing well enough I can get on the radio and make my contact. Then I have one in May and a bunch in June/Aug, 2 in Sep and my last 2 will be in OCT.    Only 18 more to go!!!


Dan Morris  KZ3T  070-1065

 

I live to live for Him!

 

 

 

 

On Feb 28, 2018, at 8:57 AM, Rick - N7WE <n7we1980@...> wrote:

 

It's the last day of February and that means it's time to look ahead for the possible finishers of the 365 Endorsement this March.  But there are none.  Good news though!  There are several lining up for an April finish. 

I know there are several out there working to make a contact every day.  And with current propagation it can be tough!  If you are making a run at 365, please post here on the group and there will be lots of us watching the waterfall to help you!

--
Rick - N7WE
070 - #1602

 

 


Re: March 365 - Finish Line in Sight

Matthew King - AK4MK
 

Best of luck on the knee surgery, Dan. Prayers have been said for ya!

73

Matt
AK4MK

On Wed, Feb 28, 2018 at 9:09 AM, Dan Morris <dbmorris315@...> wrote:
Rick — Well, I will be making a run at the 365 but mine will not finish until Oct, unfortunately.  
I am having total knee surgery tomorrow, however, I do have a March 24th day I need to get.  By then, my knee will be doing well enough I can get on the radio and make my contact. Then I have one in May and a bunch in June/Aug, 2 in Sep and my last 2 will be in OCT.    Only 18 more to go!!!

Dan Morris  KZ3T  070-1065

I live to live for Him!




On Feb 28, 2018, at 8:57 AM, Rick - N7WE <n7we1980@...> wrote:

It's the last day of February and that means it's time to look ahead for the possible finishers of the 365 Endorsement this March.  But there are none.  Good news though!  There are several lining up for an April finish. 

I know there are several out there working to make a contact every day.  And with current propagation it can be tough!  If you are making a run at 365, please post here on the group and there will be lots of us watching the waterfall to help you!

--
Rick - N7WE
070 - #1602



Re: March 365 - Finish Line in Sight

Rick - N7WE
 

With only 18 left you are almost there!  Best of luck with the knee replacement.  You are on my prayers list!  Keep us posted on how it goes.
--
Rick - N7WE
070 - #1602


Re: March 365 - Finish Line in Sight

Dan Morris - KZ3T
 

Rick — Well, I will be making a run at the 365 but mine will not finish until Oct, unfortunately.  
I am having total knee surgery tomorrow, however, I do have a March 24th day I need to get.  By then, my knee will be doing well enough I can get on the radio and make my contact. Then I have one in May and a bunch in June/Aug, 2 in Sep and my last 2 will be in OCT.    Only 18 more to go!!!

Dan Morris  KZ3T  070-1065

I live to live for Him!




On Feb 28, 2018, at 8:57 AM, Rick - N7WE <n7we1980@...> wrote:

It's the last day of February and that means it's time to look ahead for the possible finishers of the 365 Endorsement this March.  But there are none.  Good news though!  There are several lining up for an April finish. 

I know there are several out there working to make a contact every day.  And with current propagation it can be tough!  If you are making a run at 365, please post here on the group and there will be lots of us watching the waterfall to help you!

--
Rick - N7WE
070 - #1602


March 365 - Finish Line in Sight

Rick - N7WE
 

It's the last day of February and that means it's time to look ahead for the possible finishers of the 365 Endorsement this March.  But there are none.  Good news though!  There are several lining up for an April finish. 

I know there are several out there working to make a contact every day.  And with current propagation it can be tough!  If you are making a run at 365, please post here on the group and there will be lots of us watching the waterfall to help you!

--
Rick - N7WE
070 - #1602


Re: Special Event Calls and Cards

 

Ah, Joe...

It still is...

I usually start at 7.001 & slowly explore up to 7.150 or so...

I need to work on my 75/80 mtr. antenna...something happened to the delta match in the last Santa Ana winds...

I've just brought my MixW icon.cfg & Icon folder up to date, and there's a lot of folks I need for LONP.

And with St Paddy's and TDW coming up, I want everything playing good...

I actually won Top Dog for St Patty's in 2011, using my old call, W6QE and I have a nice custom made plaque made by Karen, W4KRN.

It's too late at night to get my way-back machine going a 2nd night in a row...

73,

Milt.

N6MG

070-650

LONP #76

 

 

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Joseph
Sent: Tuesday, February 27, 2018 4:29 AM
To: 070Club@groups.io
Subject: Re: [070Club] Special Event Calls and Cards

 

Milt,

Nothing like the warm glow of tubes on a cold winter night lookin fer DX.

Yeah it was fun.

 

Joe

KA1PPV  #1482

 

 

 

On Mon, Feb 26, 2018 at 06:46 PM, Milton Garb wrote:

 

 

I agree whole heartedly with the gentleman farmer from the great state of Washington, Tom.

I've commented on this several times in the past, and will point out again; "back in the day", a paper qsl card was the final "thank you" for a QSO... 

Also of note in this by gone era is the courtesy that a ham would extend to other hams.

No internet...no LotW, no eQsl...no qrz.com. We had and used was the National Traffic System, but SSB and CW.

Ex: If we heard that a ham in a neighboring community, or across the world, had an ill wife, or was ill themselves? Send him or her a get well card in the mail...

It also worked when you heard of congratulatory events...

Ahhhh, yes, the good ol' days!...Tubes, straight keys, a series fed Hartley oscillator with a #45 Arcturas valve...home made cubical quads...the new experimental Yagi-Uda antenna that some guys in JA invented...(I still think we could make an HBO mini-series on what happened to Prof. Uda!)

That's it. I really get my "way back" machine going somedays...

Milt

N6MG

070-650

LONP #76

 

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of K8TOM
Sent: Monday, February 26, 2018 12:17 PM
To: 070Club@groups.io
Subject: Re: [070Club] Special Event Calls and Cards

 

Joe,

Yes, I think most of us appreciate the personal touch involved in the paper QSL.  Not only did someone take the time to honor us with the personal reply, but often you get to see their picture, QTH setup or some other aspect of their life that they find to be of note.  Future QSOs with that individual/callsign will likely be informed by the memory of the information on that QSL.

In the days that QSOs were perhaps a bit less numerous, the postage less, and the internet non-existent, I can sure understand paper.  In the present days of digital/FT8 rapid-fire QSO rates it has become a challenge duplicating on paper what the computer allows us to do fairly automatically on the air.

73,

Tom
K8TOM
815



Wrapping up the "quarter" for stickers

Matthew King - AK4MK
 

Well, it's that time.  Tomorrow at midnight (the 28th) will mark the official cutoff for the next batch of stickers, so go ahead over to the endorsement checker and run your log through: http://hamclubs.info/070-checker

We'll start the actual mailing out of stickers and certificates about mid-March, most likely so there's likely a little wiggle-room in there... :-)

73

Matt King
AK4MK - 070 #1708
PODXS 070 Club Executive Director



Re: Special Event Calls and Cards

Larry Rockne #404
 

Barry,
Worked you 8-26-17, will get a card off to you....hope you still have a VB7150 card left,
CU on the waterfall!

Larry WA7HDZ #404


Re: 20 Meters Decent This Morning

John Hendry KG5OIB
 

Oops... got my time zones wrong... I'll be on at 0130z on 40 meters.

KG5OIB


Re: 20 Tuesday morning

Jim K5SP
 

Can you be on 40 around 0030z this evening?



Sent via the Samsung Galaxy S®6 active, an AT&T 4G LTE smartphone

-------- Original message --------
From: Sherri Rapp <srapp7@...>
Date: 2/27/18 3:54 PM (GMT-06:00)
To: 070Club@groups.io
Subject: Re: [070Club] 20 Tuesday morning

I was on 20 and 40 this am. Saw lots of traces, some very strong. No luck getting anyone to answer, though. On 20 right now for a bit again. 

Sherri, WB4OSU

On Feb 27, 2018 3:09 PM, "Paul Milward" <nu4c@...> wrote:
Jim
I saw u in QSO w, VE7 station about 1900 on 20m. Tried calling you up about 100hZ. No joy tho'
Paul
NU4C



Sent from my Galaxy Tab® A

-------- Original message --------
From: Jim K5SP <jinnis@...>
Date: 2/27/18 14:01 (GMT-05:00)
Subject: Re: [070Club] 20 Tuesday morning

Yeah when Eu is coming in usuall dies between 1630-1700Z.  On 20 now and only two traces in WF, gets pretty bleak from about 1700Z-2100Z then comes back up.
--
Jim,  K5SP #483
Member Services Director


--
Jim,  K5SP #483
Member Services Director


Re: 20 Tuesday morning

Jerry N9AVY
 

Sherri:

Been looking for you, but no luck.  Guess the bands aren't working between us.  CUL

73,  Jerry  n9avy



From: Sherri Rapp <srapp7@...>
To: 070Club@groups.io
Sent: Tuesday, February 27, 2018 3:54 PM
Subject: Re: [070Club] 20 Tuesday morning

I was on 20 and 40 this am. Saw lots of traces, some very strong. No luck getting anyone to answer, though. On 20 right now for a bit again. 

Sherri, WB4OSU

On Feb 27, 2018 3:09 PM, "Paul Milward" <nu4c@...> wrote:
Jim
I saw u in QSO w, VE7 station about 1900 on 20m. Tried calling you up about 100hZ. No joy tho'
Paul
NU4C



Sent from my Galaxy Tab® A

-------- Original message --------
From: Jim K5SP <jinnis@...>
Date: 2/27/18 14:01 (GMT-05:00)
Subject: Re: [070Club] 20 Tuesday morning

Yeah when Eu is coming in usuall dies between 1630-1700Z.  On 20 now and only two traces in WF, gets pretty bleak from about 1700Z-2100Z then comes back up.
--
Jim,  K5SP #483
Member Services Director



Re: 20 Tuesday morning

Sherri Rapp
 

I was on 20 and 40 this am. Saw lots of traces, some very strong. No luck getting anyone to answer, though. On 20 right now for a bit again. 

Sherri, WB4OSU

On Feb 27, 2018 3:09 PM, "Paul Milward" <nu4c@...> wrote:
Jim
I saw u in QSO w, VE7 station about 1900 on 20m. Tried calling you up about 100hZ. No joy tho'
Paul
NU4C



Sent from my Galaxy Tab® A

-------- Original message --------
From: Jim K5SP <jinnis@...>
Date: 2/27/18 14:01 (GMT-05:00)
Subject: Re: [070Club] 20 Tuesday morning

Yeah when Eu is coming in usuall dies between 1630-1700Z.  On 20 now and only two traces in WF, gets pretty bleak from about 1700Z-2100Z then comes back up.
--
Jim,  K5SP #483
Member Services Director


Re: Special Event Calls and Cards

Matthew King - AK4MK
 

RRR - I believe the QSB monster attacked, IIRC.

It was nice seeing you again!

73

Matt King
AK4MK - 070 #1708
PODXS 070 Club Executive Director


On Tue, Feb 27, 2018 at 3:43 PM, Larry Rockne #404 <pops4355@...> wrote:
Matt,

We worked yesterday, and hit the wrong 'Macro' and signed with you. You did not come back
so figured you noved on or qsb goy us.

Will QSL via direct, and eqsl.

Larry WA7HDZ #404



Re: Special Event Calls and Cards

Larry Rockne #404
 

Matt,

We worked yesterday, and hit the wrong 'Macro' and signed with you. You did not come back
so figured you noved on or qsb goy us.

Will QSL via direct, and eqsl.

Larry WA7HDZ #404


Re: 20 Tuesday morning

Paul Milward <nu4c@...>
 

Jim
I saw u in QSO w, VE7 station about 1900 on 20m. Tried calling you up about 100hZ. No joy tho'
Paul
NU4C



Sent from my Galaxy Tab® A

-------- Original message --------
From: Jim K5SP <jinnis@...>
Date: 2/27/18 14:01 (GMT-05:00)
To: 070Club@groups.io
Subject: Re: [070Club] 20 Tuesday morning

Yeah when Eu is coming in usuall dies between 1630-1700Z.  On 20 now and only two traces in WF, gets pretty bleak from about 1700Z-2100Z then comes back up.
--
Jim,  K5SP #483
Member Services Director


On-the-Air Test of New FT8 “DXpedition Mode” Set for Early March

Charles Odom, KI4VMK # 2542
 


Re: 20 Tuesday morning

Jim K5SP
 

Yeah when Eu is coming in usuall dies between 1630-1700Z.  On 20 now and only two traces in WF, gets pretty bleak from about 1700Z-2100Z then comes back up.
--
Jim,  K5SP #483
Member Services Director


Re: Special Event Calls and Cards

 

I use MS Excel. 8.5" X 11", landscape.

I divide it into 4 per page,  I do 1 in the upper left corner, then copy & paste the other 3.

I print out a sheet on white paper, then take it to Staples and print out 250 on fluorescent card stock.

Then they cut it for me in 1/4's. I get 1000 cards for about $26.00.

Considering that LotW is my primary QSL route, 1000 cards lasts a very long time!

Milt.

N6MG

070-650

LONP # 76

W6QP (Trustee)

070-1454

LONP #207

 

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Dan Morris
Sent: Tuesday, February 27, 2018 7:37 AM
To: 070Club@groups.io
Subject: Re: [070Club] Special Event Calls and Cards

 

I was making my own QSL cards using Printmaster Gold or then Printmaster 7 for MAC, however, I stumbled across Hamstuff.com and Ron, W7NN does quite a good job on providing a QSL kit.

 

So, I’ve started using his cards.  Only because I do not do much as far as cards go.  If I gat a card I send a card.   So, anyone thinking about something like this can go to hamstuff.com.


Dan Morris  KZ3T  070-1065

 

I live to live for Him!

 

 

 

 

On Feb 27, 2018, at 9:53 AM, VA7GEM-1470 via Groups.Io <boat.anchor@...> wrote:

 

On Tue, Feb 27, 2018 at 05:38 am, Jerry N9AVY wrote:

There is software that will print QSL cards.  Can't remember the name of it, but you can google it. Used to get Avery postcard stock , 4 cards to a sheet, and it did a good job.

 

Jerry  n9avy

 

 

Jerry
Yes I remember the good old days of that SW
Unfortunately I can,t seem to find any that will run on win10.
will keep lookin
Barry

 


Re: Member list

Geary McDowell
 

Thanks Matt, I had found the hamclubs.info  That is what I am working on figuring out how to use that in HRD 6.4 HI HI  I'm probably multitasking too many things.  
Geary, KE5IRK

On Mon, Feb 26, 2018 at 6:09 PM, Matthew King - AK4MK <kk4cps@...> wrote:
Won't be able to use those for the HRD database. You'll need the ones at hamclubs.info for that.

73

Matt King
AK4MK - 070 #1708
PODXS 070 Club Executive Director



On Mon, Feb 26, 2018 at 6:52 PM, Geary McDowell <ke5irk@...> wrote:
I finally found those too, haven't figured out how to use them inside HRD as a database yet.  Reckon' I will have to read my manual.  HI HI 
Geary, KE5IRK

On Mon, Feb 26, 2018 at 3:08 PM, Irv [K3IRV] McWherter <irv47mc@...> wrote:
Got it, thank you!

On Mon, Feb 26, 2018 at 12:19 PM, Matthew King - AK4MK <kk4cps@...> wrote:
There's also: http://podxs070.com/alpha-list & http://podxs070.com/lonp/070-member-info

73

Matt King
AK4MK - 070 #1708
PODXS 070 Club Executive Director


Virus-free. www.avast.com

On Mon, Feb 26, 2018 at 11:03 AM, Irv [K3IRV] McWherter <irv47mc@...> wrote:
Is there a list of members on the home page?






--
When all else fails, Amateur Radio works.





--
When all else fails, Amateur Radio works.

9521 - 9540 of 65326