ZS6JRK ... South Africa
JEFF WALSH
Jan ... ZS6JRK ....cq'n on 20m ... now at 18:49 Zulu ... strong signal into MS ...just had a nice contact with Jan JEFF WALSH W3WMU #1673 BUBBAWOOD WORLDWIDE HEADQUARTERS STURGIS, MS.
|
||
|
||
Re: Just worked JM7OLW + A BIT
Your email wasn't "off list"... Barry... I'm here...in good shape and I generally post when I have something of value to say. to say. I've never felt it necessary to respond to just about every post that somebody else makes, regardless of the topic. Suke's tower: The concrete at the base and it's footings, in engineering speak, is called a "grade beam". It helps his tower survive the vibrations of the earthquake prone area of Fukishima, by linking the base of each leg to each other, via concrete, below the surface of the ground. That's usually done at the very bottom of the excavation. The size of the excavation, footings, and grade beams are determined by what the soils report says. Mushy soil?...keep digging baby! Hard pack clay?...much preferred. BTW, it was 82F here today. Milt. N6MG LONP #76
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Jerry N9AVY
Sent: Saturday, December 30, 2017 5:22 PM To: 070Club@groups.io Subject: Re: [070Club] Just worked JM7OLW + A BIT
Barry: OFF LIST Because of mutual issues between Milt and myself, I haven't seen any emails from him or to the list in almost 2 years. Just thought I'd let you know. Jerry n9avy
From: Barry 1470 via Groups.Io <boat.anchor@...>
Milt
|
||
|
||
Need Maine ?
N1ZAX from FN54 is on 20m 1446 UTC
|
||
|
||
Re: Just worked JM7OLW + A BIT
Barry 1470 <boat.anchor@...>
Jerry
toggle quoted messageShow quoted text
SRI I dont understand. I seem to see Milt's posts here. Barry
On Sat, Dec 30, 2017 at 05:21 pm, Jerry N9AVY wrote:
|
||
|
||
Re: W3WMU - Jeff - Completes 366!
Sid Downey
Great job Jeff. Happy New Year.
toggle quoted messageShow quoted text
Sid W7JSD 1513
On Dec 30, 2017, at 3:54 PM, JEFF WALSH <jeffwalsh1644@...> wrote:
|
||
|
||
Re: Just worked JM7OLW + A BIT
Barry: OFF LIST Because of mutual issues between Milt and myself, I haven't seen any emails from him or to the list in almost 2 years. Just thought I'd let you know. Jerry n9avy
From: Barry 1470 via Groups.Io <boat.anchor@...> To: 070Club@groups.io Sent: Saturday, December 30, 2017 7:15 PM Subject: Re: [070Club] Just worked JM7OLW + A BIT Milt Ur new 4L wud luk mitey fine on that twr HNY Barry On Sat, Dec 30, 2017 at 12:27 pm, Milton Garb wrote:
|
||
|
||
Re: Just worked JM7OLW + A BIT
Barry 1470 <boat.anchor@...>
Milt
toggle quoted messageShow quoted text
Ur new 4L wud luk mitey fine on that twr HNY Barry
On Sat, Dec 30, 2017 at 12:27 pm, Milton Garb wrote:
|
||
|
||
Re: W3WMU - Jeff - Completes 366!
JEFF WALSH
Thanks everyone for the congrats ........ great way to finish out the year ........ Happy New Years to all ! JEFF WALSH W3WMU #1673 BUBBAWOOD WORLDWIDE HEADQUARTERS STURGIS, MS.
On Saturday, December 30, 2017 9:31 AM, Paula K7PAX #1739 <hamette@...> wrote: Congrats Jeff! I knew would make it this year! Paula K7PAX #1739 Jeff – W3WMU is wrapping up his year by completing his 366 on 12/30/17 UTC and becoming the 30th person to do so. Congratulations Jeff. You continue to put Sturgis MS on the PSK31 map. Well done!
Rick - N7WE 070 - #1602
|
||
|
||
Re: Christmas Puppy
Mike Besemer <mwbesemer@...>
She (and I) need a diet, so we’ll be good companions. She’s a hugger and a kisser. Can’t wait to get her home!
Mike WM4B
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Paula K7PAX #1739
Sent: Saturday, December 30, 2017 4:06 PM To: 070Club@groups.io Subject: Re: [070Club] Christmas Puppy
Looks like she’ll make a great shack mate. Very sweet face!
Paula K7PAX #1739
Meet Harley. Adopted today, but we can't bring her home until Wednesday. Just 1 year old, she's already had a litter of puppies. She'll have a much better life than that with us. <Harley _ 12_30_2017.jpeg>
|
||
|
||
Re: Christmas Puppy
Looks like she’ll make a great shack mate. Very sweet face! Paula K7PAX #1739
On Dec 30, 2017, at 12:59 PM, Mike Besemer <mwbesemer@...> wrote:
Meet Harley. Adopted today, but we can't bring her home until Wednesday. Just 1 year old, she's already had a litter of puppies. She'll have a much better life than that with us. 73, Mike WM4B <Harley _ 12_30_2017.jpeg>
|
||
|
||
Re: Christmas Puppy
Mike Besemer <mwbesemer@...>
Meet Harley. Adopted today, but we can't bring her home until Wednesday. Just 1 year old, she's already had a litter of puppies. She'll have a much better life than that with us.
73, Mike WM4B
|
||
|
||
Re: 10M
Doc
Here in Michigan King John turned them out and paid for drugs and
living space !!<G> On 12/30/2017 3:40 PM, John Raynsford
via Groups.Io wrote:
|
||
|
||
Re: 10M
John Raynsford
"Years ago they used to lock people up for talking to people they can't see ! ![]() Jerry n9avy "s That's a good one Jerry ! Here in Alaska, they shut down our asylums to reduce our states budget. Turned 'em loose on our streets, drugs are far cheaper than maintained public facilities. Could'nt resist jumping into the conversation with that one. Cheers ! AL7JK, John #2094
On Saturday, December 30, 2017 4:57 AM, Joseph Molon <ljl2002@...> wrote: Ray, Like that woman who was so engrossed in her phone at the mall she fell right into a fountain. LMAO! Joe KA1PPV #1482
|
||
|
||
Just worked JM7OLW + A BIT
Jerry, tks for the WX report from Illinois. We didn’t know that... Through the years, I've worked Suke 38 times, 10m - 75m Both BPSK 31, and CW. He's a fixture on the bands from the left coast. Want to see something cool? Visit his website and check out his tower & shack. http://www.geocities.jp/jm7olw_suke/ An amazing structure. de Milt. N6MG 070-650 LONP #76
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Jerry N9AVY
Sent: Saturday, December 30, 2017 10:56 AM To: 070Club@groups.io Subject: Re: [070Club] Just worked JM7OLW
Doesn't really matter because as you rotate antenna, you eventually hit the same compass point. Although there is a school of thought which claims that a 5 degree tilt off the vertical axis may make a difference in working DX, but those same people believe in LDE's, UFO's and global warming (it's freezing here in Illinois !!!).
Jerry N9AVY
Didn’t know tat From: Paul Milward <nu4c@...>
Clockwise or counter clockwise Which way should I rotate my vertical?
Sent from my Galaxy Tab® A
-------- Original message -------- From: Jerry N9AVY <n9avy@...> Date: 12/30/17 12:19 (GMT-05:00) To: 070Club@groups.io Subject: Re: [070Club] Just worked JM7OLW
From my qth Japan is about 340 degrees which is more Northwest.
Just sayin'
Jerry n9avy
From: Brian (N2MLP) <n2mlp@...>
AIM WEST AIM WEST
======================== de N2MLP Brian Monroe County PA
========================
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Joseph Molon
Sure wish I could hear Suki. Joe KA1PPV #1482
On Sat, Dec 30, 2017 at 10:25 AM, Mike Flowers wrote:
|
||
|
||
Re: Just worked JM7OLW
Mike Besemer <mwbesemer@...>
Sister, B-I-L, and 3-legged Great Dane are visiting from FL right now. They are freezing to death; it’s 56 degrees.
Mike WM4B From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Jerry N9AVY Sent: Saturday, December 30, 2017 2:42 PM To: 070Club@groups.io Subject: Re: [070Club] Just worked JM7OLW Outside temp is 32 F, BUT sensor has direct sunlight on it; so when I step out it's more like 15 F with wind chill taking it even lower. If it wasn't for the hurricanes, gators, snakes, sketers & other annoying bugs and yankees, I'd move to FL ! Jerry n9avy ________________________________________ From: Paul Milward <nu4c@bellsouth.net> To: 070Club@groups.io Sent: Saturday, December 30, 2017 1:27 PM Subject: Re: [070Club] Just worked JM7OLW Rats!! Better get it done soon .... or wait til '19 Sent from my Galaxy Tab® A -------- Original message -------- From: Joseph Molon <ljl2002@optimum.net> Date: 12/30/17 14:19 (GMT-05:00) To: 070Club@groups.io Subject: Re: [070Club] Just worked JM7OLW If it's Tuesday in the second week on an even month in an odd year (non leap year) then that would be counter-clockwise. At least that has worked for me in the past. Joe KA1PPV #1482 On Sat, Dec 30, 2017 at 12:48 PM, Paul Milward wrote: Clockwise or counter clockwise Which way should I rotate my vertical? Sent from my Galaxy Tab® A -------- Original message -------- From: Jerry N9AVY <n9avy@sbcglobal.net> Date: 12/30/17 12:19 (GMT-05:00) To: 070Club@groups.io Subject: Re: [070Club] Just worked JM7OLW From my qth Japan is about 340 degrees which is more Northwest. Just sayin' Jerry n9avy ________________________________________ From: Brian (N2MLP) <n2mlp@verizon.net> To: 070Club@groups.io Sent: Saturday, December 30, 2017 11:04 AM Subject: Re: [070Club] Just worked JM7OLW AIM WEST AIM WEST ======================== de N2MLP Brian Monroe County PA ======================== From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Joseph Molon Sent: Saturday, December 30, 2017 11:51 AM To: 070Club@groups.io Subject: Re: [070Club] Just worked JM7OLW Sure wish I could hear Suki. Joe KA1PPV #1482 On Sat, Dec 30, 2017 at 10:25 AM, Mike Flowers wrote: I have no idea … he likes to be heard, that I know for sure … ;>) - 73 and good DX de Mike, K6MKF, Past President - NCDXC From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Doc Sent: Saturday, December 30, 2017 7:05 AM To: 070Club@groups.io Subject: Re: [070Club] Just worked JM7OLW Hi- How much power is he running theses days ?? Worked him back a few, 40 or 20 and at that time he was running 600 watts !!De W8KQ On 12/30/2017 9:50 AM, Mike Flowers wrote: Suke is a great op. We’ve worked about 60 times in the last few years. He has a 30 meter tower and an amazing set of pictures about his tower project: http://www.geocities.jp/jm7olw_suke/ - then click ‘Tower’ on the left of the webpage to see the pictures. I want one!! Happy New Year to all my fellow PODXS 070 Club Members!! - 73 and good DX de Mike, K6MKF, Past President - NCDXC From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Paula K7PAX #1739 Sent: Friday, December 29, 2017 3:39 PM To: 070Club@groups.io Subject: [070Club] Just worked JM7OLW Just worked Suke, JM7OLW on 20 meters at 23:38z - Calling CQ at 14.070.45 Paula, K7PAX Virus-free. www.avast.com
|
||
|
||
Re: Just worked JM7OLW
Outside temp is 32 F, BUT sensor has direct sunlight on it; so when I step out it's more like 15 F with wind chill taking it even lower. If it wasn't for the hurricanes, gators, snakes, sketers & other annoying bugs and yankees, I'd move to FL ! Jerry n9avy
From: Paul Milward <nu4c@...> To: 070Club@groups.io Sent: Saturday, December 30, 2017 1:27 PM Subject: Re: [070Club] Just worked JM7OLW Rats!! Better get it done soon .... or wait til '19 Sent from my Galaxy Tab® A -------- Original message -------- From: Joseph Molon <ljl2002@...> Date: 12/30/17 14:19 (GMT-05:00) To: 070Club@groups.io Subject: Re: [070Club] Just worked JM7OLW At least that has worked for me in the past. Joe KA1PPV #1482
|
||
|
||
Re: Just worked JM7OLW
But you have to water the ground around it so it becomes very swampy and the guy wires pull out and everything around vertical becomes quicksand. Jerry
From: Joseph Molon <ljl2002@...> To: 070Club@groups.io Sent: Saturday, December 30, 2017 1:19 PM Subject: Re: [070Club] Just worked JM7OLW If it's Tuesday in the second week on an even month in an odd year (non leap year) then that would be counter-clockwise. At least that has worked for me in the past. Joe KA1PPV #1482
|
||
|
||
Re: Just worked JM7OLW
Paul Milward <nu4c@...>
Rats!! Better get it done soon .... or wait til '19 Sent from my Galaxy Tab® A
-------- Original message -------- From: Joseph Molon <ljl2002@...> Date: 12/30/17 14:19 (GMT-05:00) To: 070Club@groups.io Subject: Re: [070Club] Just worked JM7OLW At least that has worked for me in the past. Joe KA1PPV #1482
|
||
|
||
Re: Just worked JM7OLW
Paul Milward <nu4c@...>
RR Jerry COLD here too... 56 Sent from my Galaxy Tab® A
-------- Original message -------- From: Jerry N9AVY <n9avy@...> Date: 12/30/17 13:56 (GMT-05:00) To: 070Club@groups.io Subject: Re: [070Club] Just worked JM7OLW Doesn't really matter because as you rotate antenna, you eventually hit the same compass point. Although there is a school of thought which claims that a 5 degree tilt off the vertical axis may make a difference in working DX, but those same people believe in LDE's, UFO's and global warming (it's freezing here in Illinois !!!). Jerry N9AVY From: Paul Milward <nu4c@...> To: 070Club@groups.io Sent: Saturday, December 30, 2017 11:48 AM Subject: Re: [070Club] Just worked JM7OLW Clockwise or counter clockwise Which way should I rotate my vertical? Sent from my Galaxy Tab® A -------- Original message -------- From: Jerry N9AVY <n9avy@...> Date: 12/30/17 12:19 (GMT-05:00) To: 070Club@groups.io Subject: Re: [070Club] Just worked JM7OLW From my qth Japan is about 340 degrees which is more Northwest. Just sayin' Jerry n9avy From: Brian (N2MLP) <n2mlp@...> To: 070Club@groups.io Sent: Saturday, December 30, 2017 11:04 AM Subject: Re: [070Club] Just worked JM7OLW AIM WEST AIM WEST ======================== de N2MLP Brian Monroe County PA ======================== From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Joseph Molon Sent: Saturday, December 30, 2017 11:51 AM To: 070Club@groups.io Subject: Re: [070Club] Just worked JM7OLW Sure wish I could hear Suki. Joe KA1PPV #1482 On Sat, Dec 30, 2017 at 10:25 AM, Mike Flowers wrote:
|
||
|
||
Re: Just worked JM7OLW
Joseph Molon <ljl2002@...>
If it's Tuesday in the second week on an even month in an odd year (non leap year) then that would be counter-clockwise.
toggle quoted messageShow quoted text
At least that has worked for me in the past. Joe KA1PPV #1482
On Sat, Dec 30, 2017 at 12:48 PM, Paul Milward wrote:
|
||
|