Date   

Need Maine ?

Jerry N9AVY
 

N1ZAX  from FN54  is on 20m 1446 UTC 




Re: Just worked JM7OLW + A BIT

Barry 1470 <boat.anchor@...>
 

Jerry
SRI  I dont understand.
I seem to see Milt's posts here.
Barry


On Sat, Dec 30, 2017 at 05:21 pm, Jerry N9AVY wrote:
Barry:
 
OFF LIST
 
Because of mutual issues between Milt and myself, I haven't seen any emails from him or to the list in almost 2 years.   Just thought I'd let you know.
 
Jerry  n9avy



From: Barry 1470 via Groups.Io <boat.anchor@...>
To: 070Club@groups.io
Sent: Saturday, December 30, 2017 7:15 PM
Subject: Re: [070Club] Just worked JM7OLW + A BIT

Milt
Ur new 4L wud luk mitey fine on that twr
HNY
Barry


On Sat, Dec 30, 2017 at 12:27 pm, Milton Garb wrote:
Jerry, tks for the WX report from Illinois.  We didn’t know that...
Through the years, I've worked Suke 38 times, 10m - 75m  Both BPSK 31, and CW.
He's a fixture on the bands from the left coast.
Want to see something cool?
Visit his website and check out his tower & shack.
http://www.geocities.jp/jm7olw_suke/
An amazing structure.
de
Milt.
N6MG
070-650
LONP #76
 
 



Re: W3WMU - Jeff - Completes 366!

Sid Downey
 

Great job Jeff. Happy New Year.

Sid 
W7JSD
1513

On Dec 30, 2017, at 3:54 PM, JEFF WALSH <jeffwalsh1644@...> wrote:

Thanks everyone for the congrats ........ great way to finish out the year ........ Happy New Years to all !
 
JEFF WALSH
W3WMU
#1673
BUBBAWOOD
WORLDWIDE HEADQUARTERS
STURGIS, MS.


On Saturday, December 30, 2017 9:31 AM, Paula K7PAX #1739 <hamette@...> wrote:


Congrats Jeff! I knew would make it this year! 

Paula K7PAX #1739

On Dec 30, 2017, at 3:16 AM, Rick - N7WE <n7we1980@...> wrote:

Jeff – W3WMU is wrapping up his year by completing his 366 on 12/30/17 UTC and becoming the 30th person to do so.  Congratulations Jeff.  You continue to put Sturgis MS on the PSK31 map.   Well done! 
 
Please join me in sending him a very deserved “You did it Jeff!”

Rick - N7WE
070 - #1602



Re: Just worked JM7OLW + A BIT

Jerry N9AVY
 

Barry:

OFF LIST

Because of mutual issues between Milt and myself, I haven't seen any emails from him or to the list in almost 2 years.   Just thought I'd let you know.

Jerry  n9avy



From: Barry 1470 via Groups.Io <boat.anchor@...>
To: 070Club@groups.io
Sent: Saturday, December 30, 2017 7:15 PM
Subject: Re: [070Club] Just worked JM7OLW + A BIT

Milt
Ur new 4L wud luk mitey fine on that twr
HNY
Barry


On Sat, Dec 30, 2017 at 12:27 pm, Milton Garb wrote:
Jerry, tks for the WX report from Illinois.  We didn’t know that...
Through the years, I've worked Suke 38 times, 10m - 75m  Both BPSK 31, and CW.
He's a fixture on the bands from the left coast.
Want to see something cool?
Visit his website and check out his tower & shack.
http://www.geocities.jp/jm7olw_suke/
An amazing structure.
de
Milt.
N6MG
070-650
LONP #76
 
 



Re: Just worked JM7OLW + A BIT

Barry 1470 <boat.anchor@...>
 

Milt
Ur new 4L wud luk mitey fine on that twr
HNY
Barry


On Sat, Dec 30, 2017 at 12:27 pm, Milton Garb wrote:

Jerry, tks for the WX report from Illinois.  We didn’t know that...

Through the years, I've worked Suke 38 times, 10m - 75m  Both BPSK 31, and CW.

He's a fixture on the bands from the left coast.

Want to see something cool?

Visit his website and check out his tower & shack.

http://www.geocities.jp/jm7olw_suke/

An amazing structure.

de

Milt.

N6MG

070-650

LONP #76

 

 


Re: W3WMU - Jeff - Completes 366!

JEFF WALSH
 

Thanks everyone for the congrats ........ great way to finish out the year ........ Happy New Years to all !
 
JEFF WALSH
W3WMU
#1673
BUBBAWOOD
WORLDWIDE HEADQUARTERS
STURGIS, MS.


On Saturday, December 30, 2017 9:31 AM, Paula K7PAX #1739 <hamette@...> wrote:


Congrats Jeff! I knew would make it this year! 

Paula K7PAX #1739

On Dec 30, 2017, at 3:16 AM, Rick - N7WE <n7we1980@...> wrote:

Jeff – W3WMU is wrapping up his year by completing his 366 on 12/30/17 UTC and becoming the 30th person to do so.  Congratulations Jeff.  You continue to put Sturgis MS on the PSK31 map.   Well done! 
 
Please join me in sending him a very deserved “You did it Jeff!”

Rick - N7WE
070 - #1602



Re: Christmas Puppy

Mike Besemer <mwbesemer@...>
 

She (and I) need a diet, so we’ll be good companions.  She’s a hugger and a kisser.  Can’t wait to get her home!

 

Mike

WM4B

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Paula K7PAX #1739
Sent: Saturday, December 30, 2017 4:06 PM
To: 070Club@groups.io
Subject: Re: [070Club] Christmas Puppy

 

Looks like she’ll make a great shack mate. Very sweet face!

 

Paula K7PAX #1739


On Dec 30, 2017, at 12:59 PM, Mike Besemer <mwbesemer@...> wrote:

Meet Harley.  Adopted today, but we can't bring her home until Wednesday.  Just 1 year old, she's already had a litter of puppies.  She'll have a much better life than that with us.

73,

Mike
WM4B

<Harley _ 12_30_2017.jpeg>


Re: Christmas Puppy

Paula K7PAX #1739
 

Looks like she’ll make a great shack mate. Very sweet face!

Paula K7PAX #1739

On Dec 30, 2017, at 12:59 PM, Mike Besemer <mwbesemer@...> wrote:

Meet Harley.  Adopted today, but we can't bring her home until Wednesday.  Just 1 year old, she's already had a litter of puppies.  She'll have a much better life than that with us.

73,

Mike
WM4B
<Harley _ 12_30_2017.jpeg>


Re: Christmas Puppy

Mike Besemer <mwbesemer@...>
 

Meet Harley.  Adopted today, but we can't bring her home until Wednesday.  Just 1 year old, she's already had a litter of puppies.  She'll have a much better life than that with us.

73,

Mike
WM4B


Re: 10M

Doc
 

Here in Michigan King John turned them out and paid for drugs and living space !!<G>


On 12/30/2017 3:40 PM, John Raynsford via Groups.Io wrote:
"Years ago they used to lock people up for talking to people they can't see ! 
Jerry  n9avy "s

That's a good one Jerry !  Here in Alaska, they shut down our asylums to reduce
our states budget. Turned 'em loose on our streets, drugs are far cheaper than
maintained public facilities.

Could'nt resist jumping into the conversation with that one.

Cheers !

AL7JK, John   #2094


On Saturday, December 30, 2017 4:57 AM, Joseph Molon <ljl2002@...> wrote:


Ray,
Like that woman who was so engrossed in her phone at the mall she fell right into a fountain.
LMAO!
 
Joe
KA1PPV  #1482
 
 
 
On Fri, Dec 29, 2017 at 07:03 PM, Ray Clements wrote:
 
 
Perhaps it would be good if we resumed that practice for people go walking across roadways talking on their telephones without a clue about what is going on around them. They are a hazard both to themselves and to others. They should be locked up for distracted walking.  I believe a few communities have enacted laws to that effect, except the penalty is probably just a monetary fine.
Of course, they might also ban talking on your HT as well as a cell phone.

Ray N9RWC

------ Original Message ------
Received: 03:23 PM CST, 12/29/2017
From: "Jerry N9AVY" <n9avy@...>
To: 070Club@groups.io
Subject: Re: [070Club] 10M



Years ago they used to lock people up for talking to people they can't see ! 
Jerry  n9avy


From: Randy True <w4rttrandy@...>
To: 070Club@groups.io
Sent: Friday, December 29, 2017 3:19 PM
Subject: Re: [070Club] 10M

FT8 is a much better weak signal mode as well. I've had many contacts that didn't even show on the waterfall.

Randy W4RTT



From: 070Club@groups.io <070Club@groups.io> on behalf of Jerry N9AVY <n9avy@...>
Sent: Friday, December 29, 2017 1:19 PM
To: 070Club@groups.io
Subject: Re: [070Club] 10M
 
Perhaps some went to FT-8 thing there was more DX activity, but there are not as many DX stations as they may have thought. There was some talk I heard about running FT-8 on DXpeditions, but I think it may have been just that.
Although FT-8 does lend itself well for "599 QSL" contacts.

Still prefer PSK31 for general contacts and getting to know other hams.  Haven't been on SSB for a long time and don't miss it. Read something the other day about phone bands being a big mess with all the idiots.  Guess SSB was always like that from my 40 years experience. 

Welcome to the "new and  improved " ham radio -   NOT !

Jerry  n9avy



From: Joseph Molon <ljl2002@...>
To: 070Club@groups.io
Sent: Friday, December 29, 2017 12:11 PM
Subject: Re: [070Club] 10M

Randy,

I found that the prop isn't the only thing working against PSK31 contacts.  I checked the statistics on PSK Reporter and found that in any given 2 hour period there averages about 1300 - 1500 PSK contacts being made as compared to an average of 838,000 FT8 contacts.
PSK31 seems to be a small percentage of the total activity.  Guess many flew the coop.  I know that I have seen lots of FT8 on both ends of 20m and also at the high end of 40m.

Here's hoping the prodigals return home in 2018.

GL & HNY.

Joe
KA1PPV  #1482


On Fri, Dec 29, 2017 at 08:30 AM, Randy True wrote:

Prop looks OK on 10 if anyone wants to give it a try.

I'll be at 10.140 + 1500
1330UTC


Randy W4RTT










Virus-free. www.avast.com


Re: 10M

John Raynsford
 

"Years ago they used to lock people up for talking to people they can't see ! 
Jerry  n9avy "s

That's a good one Jerry !  Here in Alaska, they shut down our asylums to reduce
our states budget. Turned 'em loose on our streets, drugs are far cheaper than
maintained public facilities.

Could'nt resist jumping into the conversation with that one.

Cheers !

AL7JK, John   #2094


On Saturday, December 30, 2017 4:57 AM, Joseph Molon <ljl2002@...> wrote:


Ray,
Like that woman who was so engrossed in her phone at the mall she fell right into a fountain.
LMAO!
 
Joe
KA1PPV  #1482
 
 
 
On Fri, Dec 29, 2017 at 07:03 PM, Ray Clements wrote:
 
 
Perhaps it would be good if we resumed that practice for people go walking across roadways talking on their telephones without a clue about what is going on around them. They are a hazard both to themselves and to others. They should be locked up for distracted walking.  I believe a few communities have enacted laws to that effect, except the penalty is probably just a monetary fine.
Of course, they might also ban talking on your HT as well as a cell phone.

Ray N9RWC

------ Original Message ------
Received: 03:23 PM CST, 12/29/2017
From: "Jerry N9AVY" <n9avy@...>
To: 070Club@groups.io
Subject: Re: [070Club] 10M



Years ago they used to lock people up for talking to people they can't see ! 
Jerry  n9avy


From: Randy True <w4rttrandy@...>
To: 070Club@groups.io
Sent: Friday, December 29, 2017 3:19 PM
Subject: Re: [070Club] 10M

FT8 is a much better weak signal mode as well. I've had many contacts that didn't even show on the waterfall.

Randy W4RTT



From: 070Club@groups.io <070Club@groups.io> on behalf of Jerry N9AVY <n9avy@...>
Sent: Friday, December 29, 2017 1:19 PM
To: 070Club@groups.io
Subject: Re: [070Club] 10M
 
Perhaps some went to FT-8 thing there was more DX activity, but there are not as many DX stations as they may have thought. There was some talk I heard about running FT-8 on DXpeditions, but I think it may have been just that.
Although FT-8 does lend itself well for "599 QSL" contacts.

Still prefer PSK31 for general contacts and getting to know other hams.  Haven't been on SSB for a long time and don't miss it. Read something the other day about phone bands being a big mess with all the idiots.  Guess SSB was always like that from my 40 years experience. 

Welcome to the "new and  improved " ham radio -   NOT !

Jerry  n9avy



From: Joseph Molon <ljl2002@...>
To: 070Club@groups.io
Sent: Friday, December 29, 2017 12:11 PM
Subject: Re: [070Club] 10M

Randy,

I found that the prop isn't the only thing working against PSK31 contacts.  I checked the statistics on PSK Reporter and found that in any given 2 hour period there averages about 1300 - 1500 PSK contacts being made as compared to an average of 838,000 FT8 contacts.
PSK31 seems to be a small percentage of the total activity.  Guess many flew the coop.  I know that I have seen lots of FT8 on both ends of 20m and also at the high end of 40m.

Here's hoping the prodigals return home in 2018.

GL & HNY.

Joe
KA1PPV  #1482


On Fri, Dec 29, 2017 at 08:30 AM, Randy True wrote:

Prop looks OK on 10 if anyone wants to give it a try.

I'll be at 10.140 + 1500
1330UTC


Randy W4RTT









Just worked JM7OLW + A BIT

 

Jerry, tks for the WX report from Illinois.  We didn’t know that...

Through the years, I've worked Suke 38 times, 10m - 75m  Both BPSK 31, and CW.

He's a fixture on the bands from the left coast.

Want to see something cool?

Visit his website and check out his tower & shack.

http://www.geocities.jp/jm7olw_suke/

An amazing structure.

de

Milt.

N6MG

070-650

LONP #76

 

 

 

 

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Jerry N9AVY
Sent: Saturday, December 30, 2017 10:56 AM
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW

 

Doesn't really matter because as you rotate antenna, you eventually hit the same compass point.  Although there is a school of thought which claims that a 5 degree tilt off the vertical axis may make a difference in working DX, but those same people believe in LDE's, UFO's and global warming (it's freezing here in Illinois !!!).

 

 

Jerry  N9AVY

 

Didn’t know  tat

From: Paul Milward <nu4c@...>
To: 070Club@groups.io
Sent: Saturday, December 30, 2017 11:48 AM
Subject: Re: [070Club] Just worked JM7OLW

 

Clockwise or counter clockwise

Which way should I rotate my vertical?

 

 

 

Sent from my Galaxy Tab® A

 

-------- Original message --------

From: Jerry N9AVY <n9avy@...>

Date: 12/30/17 12:19 (GMT-05:00)

To: 070Club@groups.io

Subject: Re: [070Club] Just worked JM7OLW

 

From my qth Japan is about 340 degrees which is more Northwest.

 

Just sayin'

 

Jerry  n9avy

 


From: Brian (N2MLP) <n2mlp@...>
To: 070Club@groups.io
Sent: Saturday, December 30, 2017 11:04 AM
Subject: Re: [070Club] Just worked JM7OLW

 

AIM WEST  AIM WEST

 

========================

         de N2MLP Brian

       Monroe County PA

 

 

========================

 

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Joseph Molon
Sent: Saturday, December 30, 2017 11:51 AM
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW

 

Sure wish I could hear Suki.

Joe

KA1PPV  #1482

 

 

 

On Sat, Dec 30, 2017 at 10:25 AM, Mike Flowers wrote:

 

 

I have no idea … he likes to be heard, that I know for sure … ;>)

 

- 73 and good DX de Mike, K6MKF, Past President - NCDXC

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Doc
Sent: Saturday, December 30, 2017 7:05 AM
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW

 

  Hi- How much power is he running theses days ?? Worked him back a few, 40 or 20 and at that time he was running 600 watts !!De W8KQ

 

On 12/30/2017 9:50 AM, Mike Flowers wrote:

Suke is a great op.  We’ve worked about 60 times in the last few years.

 

He has a 30 meter tower and an amazing set of pictures about his tower project:

 

http://www.geocities.jp/jm7olw_suke/ - then click ‘Tower’ on the left of the webpage to see the pictures.

 

I want one!!

 

Happy New Year to all my fellow PODXS 070 Club Members!!

 

- 73 and good DX de Mike, K6MKF, Past President - NCDXC

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Paula K7PAX #1739
Sent: Friday, December 29, 2017 3:39 PM
To: 070Club@groups.io
Subject: [070Club] Just worked JM7OLW

 

Just worked Suke, JM7OLW on 20 meters at 23:38z  -  Calling CQ at 14.070.45

 

Paula, K7PAX

 

 

 

 


Re: Just worked JM7OLW

Mike Besemer <mwbesemer@...>
 

Sister, B-I-L, and 3-legged Great Dane are visiting from FL right now. They are freezing to death; it’s 56 degrees.

Mike
WM4B

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Jerry N9AVY
Sent: Saturday, December 30, 2017 2:42 PM
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW

Outside temp is 32 F, BUT sensor has direct sunlight on it; so when I step out it's more like 15 F with wind chill taking it even lower. If it wasn't for the hurricanes, gators, snakes, sketers & other annoying bugs and yankees, I'd move to FL !
Jerry n9avy
________________________________________
From: Paul Milward <nu4c@bellsouth.net>
To: 070Club@groups.io
Sent: Saturday, December 30, 2017 1:27 PM
Subject: Re: [070Club] Just worked JM7OLW

Rats!!
Better get it done soon
.... or wait til '19



Sent from my Galaxy Tab® A

-------- Original message --------
From: Joseph Molon <ljl2002@optimum.net>
Date: 12/30/17 14:19 (GMT-05:00)
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW

If it's Tuesday in the second week on an even month in an odd year (non leap year) then that would be counter-clockwise.
At least that has worked for me in the past.

Joe
KA1PPV #1482



On Sat, Dec 30, 2017 at 12:48 PM, Paul Milward wrote:


Clockwise or counter clockwise
Which way should I rotate my vertical?



Sent from my Galaxy Tab® A

-------- Original message --------
From: Jerry N9AVY <n9avy@sbcglobal.net>
Date: 12/30/17 12:19 (GMT-05:00)
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW

From my qth Japan is about 340 degrees which is more Northwest.

Just sayin'

Jerry n9avy

________________________________________
From: Brian (N2MLP) <n2mlp@verizon.net>
To: 070Club@groups.io
Sent: Saturday, December 30, 2017 11:04 AM
Subject: Re: [070Club] Just worked JM7OLW

AIM WEST AIM WEST

========================
de N2MLP Brian
Monroe County PA



========================


From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Joseph Molon
Sent: Saturday, December 30, 2017 11:51 AM
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW

Sure wish I could hear Suki.
Joe
KA1PPV #1482



On Sat, Dec 30, 2017 at 10:25 AM, Mike Flowers wrote:


I have no idea … he likes to be heard, that I know for sure … ;>)

- 73 and good DX de Mike, K6MKF, Past President - NCDXC

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Doc
Sent: Saturday, December 30, 2017 7:05 AM
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW

Hi- How much power is he running theses days ?? Worked him back a few, 40 or 20 and at that time he was running 600 watts !!De W8KQ

On 12/30/2017 9:50 AM, Mike Flowers wrote:
Suke is a great op. We’ve worked about 60 times in the last few years.

He has a 30 meter tower and an amazing set of pictures about his tower project:

http://www.geocities.jp/jm7olw_suke/ - then click ‘Tower’ on the left of the webpage to see the pictures.

I want one!!

Happy New Year to all my fellow PODXS 070 Club Members!!

- 73 and good DX de Mike, K6MKF, Past President - NCDXC

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Paula K7PAX #1739
Sent: Friday, December 29, 2017 3:39 PM
To: 070Club@groups.io
Subject: [070Club] Just worked JM7OLW

Just worked Suke, JM7OLW on 20 meters at 23:38z - Calling CQ at 14.070.45

Paula, K7PAX




Virus-free. www.avast.com


Re: Just worked JM7OLW

Jerry N9AVY
 

Outside temp is 32 F, BUT sensor has direct sunlight on it; so when I step out it's more like 15 F  with wind chill taking it even lower. If it wasn't for the hurricanes, gators, snakes, sketers & other annoying bugs and yankees, I'd move to FL !
Jerry  n9avy


From: Paul Milward <nu4c@...>
To: 070Club@groups.io
Sent: Saturday, December 30, 2017 1:27 PM
Subject: Re: [070Club] Just worked JM7OLW

Rats!!
Better get it done soon 
.... or wait til '19



Sent from my Galaxy Tab® A

-------- Original message --------
From: Joseph Molon <ljl2002@...>
Date: 12/30/17 14:19 (GMT-05:00)
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW

If it's Tuesday in the second week on an even month in an odd year (non leap year) then that would be counter-clockwise.
At least that has worked for me in the past.
 
Joe
KA1PPV  #1482
 
 
 
On Sat, Dec 30, 2017 at 12:48 PM, Paul Milward wrote:
 
 
Clockwise or counter clockwise
Which way should I rotate my vertical?



Sent from my Galaxy Tab® A

-------- Original message --------
From: Jerry N9AVY <n9avy@...>
Date: 12/30/17 12:19 (GMT-05:00)
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW

From my qth Japan is about 340 degrees which is more Northwest.

Just sayin'

Jerry  n9avy



From: Brian (N2MLP) <n2mlp@...>
To: 070Club@groups.io
Sent: Saturday, December 30, 2017 11:04 AM
Subject: Re: [070Club] Just worked JM7OLW

AIM WEST  AIM WEST
 
========================
         de N2MLP Brian
       Monroe County PA
 
 
========================
 
 
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Joseph Molon
Sent: Saturday, December 30, 2017 11:51 AM
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW
 
Sure wish I could hear Suki.
Joe
KA1PPV  #1482
 
 
 
On Sat, Dec 30, 2017 at 10:25 AM, Mike Flowers wrote:
 
 
I have no idea … he likes to be heard, that I know for sure … ;>)
 
- 73 and good DX de Mike, K6MKF, Past President - NCDXC
 
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Doc
Sent: Saturday, December 30, 2017 7:05 AM
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW
 
  Hi- How much power is he running theses days ?? Worked him back a few, 40 or 20 and at that time he was running 600 watts !!De W8KQ
 
On 12/30/2017 9:50 AM, Mike Flowers wrote:
Suke is a great op.  We’ve worked about 60 times in the last few years.
 
He has a 30 meter tower and an amazing set of pictures about his tower project:
 
http://www.geocities.jp/jm7olw_suke/ - then click ‘Tower’ on the left of the webpage to see the pictures.
 
I want one!!
 
Happy New Year to all my fellow PODXS 070 Club Members!!
 
- 73 and good DX de Mike, K6MKF, Past President - NCDXC
 
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Paula K7PAX #1739
Sent: Friday, December 29, 2017 3:39 PM
To: 070Club@groups.io
Subject: [070Club] Just worked JM7OLW
 
Just worked Suke, JM7OLW on 20 meters at 23:38z  -  Calling CQ at 14.070.45
 
Paula, K7PAX
 
 
 
Image removed by sender.
Virus-free. www.avast.com





Re: Just worked JM7OLW

Jerry N9AVY
 

But you have to water the ground around it so it becomes very swampy and the guy wires pull out and everything around vertical becomes quicksand.

Jerry


From: Joseph Molon <ljl2002@...>
To: 070Club@groups.io
Sent: Saturday, December 30, 2017 1:19 PM
Subject: Re: [070Club] Just worked JM7OLW

If it's Tuesday in the second week on an even month in an odd year (non leap year) then that would be counter-clockwise.
At least that has worked for me in the past.
 
Joe
KA1PPV  #1482
 
 
 
On Sat, Dec 30, 2017 at 12:48 PM, Paul Milward wrote:
 
 
Clockwise or counter clockwise
Which way should I rotate my vertical?



Sent from my Galaxy Tab® A

-------- Original message --------
From: Jerry N9AVY <n9avy@...>
Date: 12/30/17 12:19 (GMT-05:00)
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW

From my qth Japan is about 340 degrees which is more Northwest.

Just sayin'

Jerry  n9avy



From: Brian (N2MLP) <n2mlp@...>
To: 070Club@groups.io
Sent: Saturday, December 30, 2017 11:04 AM
Subject: Re: [070Club] Just worked JM7OLW

AIM WEST  AIM WEST
 
========================
         de N2MLP Brian
       Monroe County PA
 
 
========================
 
 
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Joseph Molon
Sent: Saturday, December 30, 2017 11:51 AM
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW
 
Sure wish I could hear Suki.
Joe
KA1PPV  #1482
 
 
 
On Sat, Dec 30, 2017 at 10:25 AM, Mike Flowers wrote:
 
 
I have no idea … he likes to be heard, that I know for sure … ;>)
 
- 73 and good DX de Mike, K6MKF, Past President - NCDXC
 
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Doc
Sent: Saturday, December 30, 2017 7:05 AM
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW
 
  Hi- How much power is he running theses days ?? Worked him back a few, 40 or 20 and at that time he was running 600 watts !!De W8KQ
 
On 12/30/2017 9:50 AM, Mike Flowers wrote:
Suke is a great op.  We’ve worked about 60 times in the last few years.
 
He has a 30 meter tower and an amazing set of pictures about his tower project:
 
http://www.geocities.jp/jm7olw_suke/ - then click ‘Tower’ on the left of the webpage to see the pictures.
 
I want one!!
 
Happy New Year to all my fellow PODXS 070 Club Members!!
 
- 73 and good DX de Mike, K6MKF, Past President - NCDXC
 
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Paula K7PAX #1739
Sent: Friday, December 29, 2017 3:39 PM
To: 070Club@groups.io
Subject: [070Club] Just worked JM7OLW
 
Just worked Suke, JM7OLW on 20 meters at 23:38z  -  Calling CQ at 14.070.45
 
Paula, K7PAX
 
 
 
Image removed by sender.
Virus-free. www.avast.com





Re: Just worked JM7OLW

Paul Milward <nu4c@...>
 

Rats!!
Better get it done soon 
.... or wait til '19



Sent from my Galaxy Tab® A

-------- Original message --------
From: Joseph Molon <ljl2002@...>
Date: 12/30/17 14:19 (GMT-05:00)
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW

If it's Tuesday in the second week on an even month in an odd year (non leap year) then that would be counter-clockwise.
At least that has worked for me in the past.
 
Joe
KA1PPV  #1482
 
 
 
On Sat, Dec 30, 2017 at 12:48 PM, Paul Milward wrote:
 
 
Clockwise or counter clockwise
Which way should I rotate my vertical?



Sent from my Galaxy Tab® A

-------- Original message --------
From: Jerry N9AVY <n9avy@...>
Date: 12/30/17 12:19 (GMT-05:00)
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW

From my qth Japan is about 340 degrees which is more Northwest.

Just sayin'

Jerry  n9avy



From: Brian (N2MLP) <n2mlp@...>
To: 070Club@groups.io
Sent: Saturday, December 30, 2017 11:04 AM
Subject: Re: [070Club] Just worked JM7OLW

AIM WEST  AIM WEST
 
========================
         de N2MLP Brian
       Monroe County PA
 
 
========================
 
 
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Joseph Molon
Sent: Saturday, December 30, 2017 11:51 AM
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW
 
Sure wish I could hear Suki.
Joe
KA1PPV  #1482
 
 
 
On Sat, Dec 30, 2017 at 10:25 AM, Mike Flowers wrote:
 
 
I have no idea … he likes to be heard, that I know for sure … ;>)
 
- 73 and good DX de Mike, K6MKF, Past President - NCDXC
 
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Doc
Sent: Saturday, December 30, 2017 7:05 AM
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW
 
  Hi- How much power is he running theses days ?? Worked him back a few, 40 or 20 and at that time he was running 600 watts !!De W8KQ
 
On 12/30/2017 9:50 AM, Mike Flowers wrote:
Suke is a great op.  We’ve worked about 60 times in the last few years.
 
He has a 30 meter tower and an amazing set of pictures about his tower project:
 
http://www.geocities.jp/jm7olw_suke/ - then click ‘Tower’ on the left of the webpage to see the pictures.
 
I want one!!
 
Happy New Year to all my fellow PODXS 070 Club Members!!
 
- 73 and good DX de Mike, K6MKF, Past President - NCDXC
 
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Paula K7PAX #1739
Sent: Friday, December 29, 2017 3:39 PM
To: 070Club@groups.io
Subject: [070Club] Just worked JM7OLW
 
Just worked Suke, JM7OLW on 20 meters at 23:38z  -  Calling CQ at 14.070.45
 
Paula, K7PAX
 
 
 
Image removed by sender.
Virus-free. www.avast.com



Re: Just worked JM7OLW

Paul Milward <nu4c@...>
 

RR Jerry
COLD here too... 56



Sent from my Galaxy Tab® A

-------- Original message --------
From: Jerry N9AVY <n9avy@...>
Date: 12/30/17 13:56 (GMT-05:00)
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW

Doesn't really matter because as you rotate antenna, you eventually hit the same compass point.  Although there is a school of thought which claims that a 5 degree tilt off the vertical axis may make a difference in working DX, but those same people believe in LDE's, UFO's and global warming (it's freezing here in Illinois !!!).


Jerry  N9AVY



From: Paul Milward <nu4c@...>
To: 070Club@groups.io
Sent: Saturday, December 30, 2017 11:48 AM
Subject: Re: [070Club] Just worked JM7OLW

Clockwise or counter clockwise
Which way should I rotate my vertical?



Sent from my Galaxy Tab® A

-------- Original message --------
From: Jerry N9AVY <n9avy@...>
Date: 12/30/17 12:19 (GMT-05:00)
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW

From my qth Japan is about 340 degrees which is more Northwest.

Just sayin'

Jerry  n9avy



From: Brian (N2MLP) <n2mlp@...>
To: 070Club@groups.io
Sent: Saturday, December 30, 2017 11:04 AM
Subject: Re: [070Club] Just worked JM7OLW

AIM WEST  AIM WEST
 
========================
         de N2MLP Brian
       Monroe County PA
 
 
========================
 
 
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Joseph Molon
Sent: Saturday, December 30, 2017 11:51 AM
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW
 
Sure wish I could hear Suki.
Joe
KA1PPV  #1482
 
 
 
On Sat, Dec 30, 2017 at 10:25 AM, Mike Flowers wrote:
 
 
I have no idea … he likes to be heard, that I know for sure … ;>)
 
- 73 and good DX de Mike, K6MKF, Past President - NCDXC
 
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Doc
Sent: Saturday, December 30, 2017 7:05 AM
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW
 
  Hi- How much power is he running theses days ?? Worked him back a few, 40 or 20 and at that time he was running 600 watts !!De W8KQ
 
On 12/30/2017 9:50 AM, Mike Flowers wrote:
Suke is a great op.  We’ve worked about 60 times in the last few years.
 
He has a 30 meter tower and an amazing set of pictures about his tower project:
 
http://www.geocities.jp/jm7olw_suke/ - then click ‘Tower’ on the left of the webpage to see the pictures.
 
I want one!!
 
Happy New Year to all my fellow PODXS 070 Club Members!!
 
- 73 and good DX de Mike, K6MKF, Past President - NCDXC
 
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Paula K7PAX #1739
Sent: Friday, December 29, 2017 3:39 PM
To: 070Club@groups.io
Subject: [070Club] Just worked JM7OLW
 
Just worked Suke, JM7OLW on 20 meters at 23:38z  -  Calling CQ at 14.070.45
 
Paula, K7PAX
 
 
 
Image removed by sender.
Virus-free. www.avast.com





Re: Just worked JM7OLW

Joseph Molon <ljl2002@...>
 

If it's Tuesday in the second week on an even month in an odd year (non leap year) then that would be counter-clockwise.
At least that has worked for me in the past.
 
Joe
KA1PPV  #1482
 
 
 

On Sat, Dec 30, 2017 at 12:48 PM, Paul Milward wrote:
 
 
Clockwise or counter clockwise
Which way should I rotate my vertical?



Sent from my Galaxy Tab® A

-------- Original message --------
From: Jerry N9AVY <n9avy@...>
Date: 12/30/17 12:19 (GMT-05:00)
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW

From my qth Japan is about 340 degrees which is more Northwest.

Just sayin'

Jerry  n9avy



From: Brian (N2MLP) <n2mlp@...>
To: 070Club@groups.io
Sent: Saturday, December 30, 2017 11:04 AM
Subject: Re: [070Club] Just worked JM7OLW

AIM WEST  AIM WEST
 
========================
         de N2MLP Brian
       Monroe County PA
 
 
========================
 
 
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Joseph Molon
Sent: Saturday, December 30, 2017 11:51 AM
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW
 
Sure wish I could hear Suki.
Joe
KA1PPV  #1482
 
 
 
On Sat, Dec 30, 2017 at 10:25 AM, Mike Flowers wrote:
 
 
I have no idea … he likes to be heard, that I know for sure … ;>)
 
- 73 and good DX de Mike, K6MKF, Past President - NCDXC
 
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Doc
Sent: Saturday, December 30, 2017 7:05 AM
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW
 
  Hi- How much power is he running theses days ?? Worked him back a few, 40 or 20 and at that time he was running 600 watts !!De W8KQ
 
On 12/30/2017 9:50 AM, Mike Flowers wrote:
Suke is a great op.  We’ve worked about 60 times in the last few years.
 
He has a 30 meter tower and an amazing set of pictures about his tower project:
 
http://www.geocities.jp/jm7olw_suke/ - then click ‘Tower’ on the left of the webpage to see the pictures.
 
I want one!!
 
Happy New Year to all my fellow PODXS 070 Club Members!!
 
- 73 and good DX de Mike, K6MKF, Past President - NCDXC
 
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Paula K7PAX #1739
Sent: Friday, December 29, 2017 3:39 PM
To: 070Club@groups.io
Subject: [070Club] Just worked JM7OLW
 
Just worked Suke, JM7OLW on 20 meters at 23:38z  -  Calling CQ at 14.070.45
 
Paula, K7PAX
 
 
 
Image removed by sender.
Virus-free. www.avast.com



Re: W3WMU - Jeff - Completes 366!

Matthew King - AK4MK
 

Jeff - welcome to the elite group that is the 366 Club!  

You've accomplished 2 of the 3 steps to reach an even more elite group, the Clock & Calendar Club. Knock out that 24x7 and you'll be welcomed with open arms.

GOOD JOB!

73

Matt King
AK4MK - 070 #1708
PODXS 070 Club Executive Director



Virus-free. www.avast.com

On Sat, Dec 30, 2017 at 6:16 AM, Rick - N7WE <n7we1980@...> wrote:

Jeff – W3WMU is wrapping up his year by completing his 366 on 12/30/17 UTC and becoming the 30th person to do so.  Congratulations Jeff.  You continue to put Sturgis MS on the PSK31 map.   Well done! 

 

Please join me in sending him a very deserved “You did it Jeff!”

Rick - N7WE
070 - #1602



Re: Just worked JM7OLW

Jerry N9AVY
 

Doesn't really matter because as you rotate antenna, you eventually hit the same compass point.  Although there is a school of thought which claims that a 5 degree tilt off the vertical axis may make a difference in working DX, but those same people believe in LDE's, UFO's and global warming (it's freezing here in Illinois !!!).


Jerry  N9AVY



From: Paul Milward <nu4c@...>
To: 070Club@groups.io
Sent: Saturday, December 30, 2017 11:48 AM
Subject: Re: [070Club] Just worked JM7OLW

Clockwise or counter clockwise
Which way should I rotate my vertical?



Sent from my Galaxy Tab® A

-------- Original message --------
From: Jerry N9AVY <n9avy@...>
Date: 12/30/17 12:19 (GMT-05:00)
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW

From my qth Japan is about 340 degrees which is more Northwest.

Just sayin'

Jerry  n9avy



From: Brian (N2MLP) <n2mlp@...>
To: 070Club@groups.io
Sent: Saturday, December 30, 2017 11:04 AM
Subject: Re: [070Club] Just worked JM7OLW

AIM WEST  AIM WEST
 
========================
         de N2MLP Brian
       Monroe County PA
 
 
========================
 
 
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Joseph Molon
Sent: Saturday, December 30, 2017 11:51 AM
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW
 
Sure wish I could hear Suki.
Joe
KA1PPV  #1482
 
 
 
On Sat, Dec 30, 2017 at 10:25 AM, Mike Flowers wrote:
 
 
I have no idea … he likes to be heard, that I know for sure … ;>)
 
- 73 and good DX de Mike, K6MKF, Past President - NCDXC
 
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Doc
Sent: Saturday, December 30, 2017 7:05 AM
To: 070Club@groups.io
Subject: Re: [070Club] Just worked JM7OLW
 
  Hi- How much power is he running theses days ?? Worked him back a few, 40 or 20 and at that time he was running 600 watts !!De W8KQ
 
On 12/30/2017 9:50 AM, Mike Flowers wrote:
Suke is a great op.  We’ve worked about 60 times in the last few years.
 
He has a 30 meter tower and an amazing set of pictures about his tower project:
 
http://www.geocities.jp/jm7olw_suke/ - then click ‘Tower’ on the left of the webpage to see the pictures.
 
I want one!!
 
Happy New Year to all my fellow PODXS 070 Club Members!!
 
- 73 and good DX de Mike, K6MKF, Past President - NCDXC
 
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Paula K7PAX #1739
Sent: Friday, December 29, 2017 3:39 PM
To: 070Club@groups.io
Subject: [070Club] Just worked JM7OLW
 
Just worked Suke, JM7OLW on 20 meters at 23:38z  -  Calling CQ at 14.070.45
 
Paula, K7PAX
 
 
 
Image removed by sender.
Virus-free. www.avast.com




10681 - 10700 of 65325