Date   

Re: DM85 & DM74

Barry 1470 <boat.anchor@...>
 

Darn
Slept in too late for DM85
Next time Dick
HNY
Barry


On Thu, Dec 28, 2017 at 05:55 am, Richard Rohrer wrote:

Need to fix the times.  Should be in EST.  Should have used GMT, which will be 1500 for DM85 and 1730 for DM74.

 

Dick

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Jerry N9AVY
Sent: Wednesday, December 27, 2017 10:40 PM
To: 070Club@groups.io
Subject: Re: [070Club] DM85 & DM74

 

Bummer !  Have to work tomorrow and won't be home .  Need DM85.   Maybe another time...

Jerry  N9AVY


From: Richard Rohrer <kc3ef@...>
To: 070Club@groups.io
Sent: Wednesday, December 27, 2017 9:21 PM
Subject: [070Club] DM85 & DM74

 

I plan on leaving Amarillo, TX around 10:30 MST.  DM85 starts about 10 miles from Amarillo, so I will start calling then.  
DM74 is about 2 1/4 hours from Amarillo, so should be in that grid around 12:30 give or take.  I40 runs along the top of the grid, so only a few miles in that grid, from past Cuervo, NM to Clings Corners, NM.  If there is demand will stop at the rest stop to make contacts.  

I will be on 20 mtrs, running about 80 watts using call sign of KC3EF/M for this effort.  

73
Dick
KC3EF

 

 


Re: DM85 & DM74

Rick - N7WE
 

Dick - 
Watched you work KI7GXV from 16:40 UTC to 16:54 UTC both sides 599 here.  Then you SK and I started calling but you, disappeared from the waterfall.  Maybe later.

Rick - N7WE
070 - #1602


Re: Christmas Puppy

chris g7ogx
 

Here is our eighth guide dog puppy, "Kernow". Delivered 21st of December. He will stay with us as a member of the family for about 12 months.
Image



Chris G7OGX


From: 070Club@groups.io <070Club@groups.io> on behalf of Paula K7PAX #1739 <hamette@...>
Sent: Thursday, December 28, 2017 4:40:30 PM
To: 070Club@groups.io
Subject: Re: [070Club] Christmas Puppy
 
Groodle huh? Very cute!

Paula K7PAX 

On Dec 28, 2017, at 8:34 AM, W7RIV <nnegrom@...> wrote:

Just so a link doesn't have to be clicked...



On Thu, Dec 28, 2017 at 9:30 AM, W7RIV <nnegrom@...> wrote:
Adorable.

My baby is about 18 months old and is 100#. Groodle (Poodle/Golden Retriever).

2017-12-24 12:58 GMT-07:00 Paula K7PAX #1739 <hamette@...>:

This is my weight loss secret. I call it the Josie diet. It is also good for knee replacement rehab. I am up and down the stairs 8-10 times a day, and down on the floor and back up again often. Made me forget all about my new knees!

Paula K7PAX #1739



Attachments:


Attachments:


Re: Christmas Puppy

Paula K7PAX #1739
 

Groodle huh? Very cute!

Paula K7PAX 

On Dec 28, 2017, at 8:34 AM, W7RIV <nnegrom@...> wrote:

Just so a link doesn't have to be clicked...



On Thu, Dec 28, 2017 at 9:30 AM, W7RIV <nnegrom@...> wrote:
Adorable.

My baby is about 18 months old and is 100#. Groodle (Poodle/Golden Retriever).

2017-12-24 12:58 GMT-07:00 Paula K7PAX #1739 <hamette@...>:

This is my weight loss secret. I call it the Josie diet. It is also good for knee replacement rehab. I am up and down the stairs 8-10 times a day, and down on the floor and back up again often. Made me forget all about my new knees!

Paula K7PAX #1739



Attachments:


Attachments:


Re: Christmas Puppy

W7RIV
 

Just so a link doesn't have to be clicked...

Inline image 1

On Thu, Dec 28, 2017 at 9:30 AM, W7RIV <nnegrom@...> wrote:
Adorable.

My baby is about 18 months old and is 100#. Groodle (Poodle/Golden Retriever).

2017-12-24 12:58 GMT-07:00 Paula K7PAX #1739 <hamette@...>:

This is my weight loss secret. I call it the Josie diet. It is also good for knee replacement rehab. I am up and down the stairs 8-10 times a day, and down on the floor and back up again often. Made me forget all about my new knees!

Paula K7PAX #1739



Attachments:



Re: Christmas Puppy

W7RIV
 

Adorable.

My baby is about 18 months old and is 100#. Groodle (Poodle/Golden Retriever).

2017-12-24 12:58 GMT-07:00 Paula K7PAX #1739 <hamette@...>:


This is my weight loss secret. I call it the Josie diet. It is also good for knee replacement rehab. I am up and down the stairs 8-10 times a day, and down on the floor and back up again often. Made me forget all about my new knees!

Paula K7PAX #1739




Re: Need a 'U' for my Spell All South American Countries Endorsement

Mike Besemer <mwbesemer@...>
 

Mike,

 

I appreciate it, but the ‘U’ must immediately follow the number in your callsign.  You’d be good for a ‘G’, but not a ‘U’. 

 

Either way, I’ll be looking for you!

 

73 es tnx,

 

Mike

WM4B

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Mike Laney via Groups.Io
Sent: Thursday, December 28, 2017 10:03 AM
To: 070Club@groups.io
Subject: Re: [070Club] Need a 'U' for my Spell All South American Countries Endorsement

 

Hi Mike

 

I will be on 20 and/or 40 tonight (12/28) about 6-8 PM CST if you still need a U

 

de KE0GHU Mike Laney in Olathe KS

 

On Tuesday, December 26, 2017, 7:00:01 PM CST, Mike Besemer <mwbesemer@...> wrote:

 

 

Sitting here watching KS3o working WB2UBW... and of course 'UBW is non-existent on my waterfall.  

Just my luck!

 

Mike

WM4B

 

 

On December 26, 2017 at 7:21 PM "Barry 1470 via Groups.Io" <boat.anchor@...> wrote:

Maybe a real mover - U haul

Barry

On Tue, Dec 26, 2017 at 01:58 pm, Mike Besemer wrote:

“U’d” think so…

Mike
WM4B
#348

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Jerry N9AVY
Sent: Tuesday, December 26, 2017 4:48 PM
To: 070Club@groups.io
Subject: Re: [070Club] Need a 'U' for my Spell All South American Countries Endorsement

Surely, there must be a W4 out there with a "U"suffix as in "U'all"

Jerry n9avy
________________________________________
From: Mike Besemer <mwbesemer@...>
To: 070Club@groups.io
Sent: Tuesday, December 26, 2017 1:53 PM
Subject: [070Club] Need a 'U' for my Spell All South American Countries Endorsement

I need one 'U' callsign to complete my SASAC.

In my log, I have AA9UF, CG9UN, K6UAS, KA8UNI, KC9UR, KJ6UF, N2UJN, W6U.

I'm off work until 2 January and I'd love to finish this one up. Any 'U's
who are reading this and can work a sked, please let me know. 20 and 40
meters are best for me, but I can do 10 - 160.

73,

Mike
WM4B
#348


 


Re: Need a 'U' for my Spell All South American Countries Endorsement

Mike Laney
 

Hi Mike

I will be on 20 and/or 40 tonight (12/28) about 6-8 PM CST if you still need a U

de KE0GHU Mike Laney in Olathe KS

On Tuesday, December 26, 2017, 7:00:01 PM CST, Mike Besemer <mwbesemer@...> wrote:


Sitting here watching KS3o working WB2UBW... and of course 'UBW is non-existent on my waterfall.  

Just my luck!


Mike

WM4B



On December 26, 2017 at 7:21 PM "Barry 1470 via Groups.Io" <boat.anchor@...> wrote:

Maybe a real mover - U haul

Barry

On Tue, Dec 26, 2017 at 01:58 pm, Mike Besemer wrote:
“U’d” think so…

Mike
WM4B
#348

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Jerry N9AVY
Sent: Tuesday, December 26, 2017 4:48 PM
To: 070Club@groups.io
Subject: Re: [070Club] Need a 'U' for my Spell All South American Countries Endorsement

Surely, there must be a W4 out there with a "U"suffix as in "U'all"

Jerry n9avy
________________________________________
From: Mike Besemer <mwbesemer@...>
To: 070Club@groups.io
Sent: Tuesday, December 26, 2017 1:53 PM
Subject: [070Club] Need a 'U' for my Spell All South American Countries Endorsement

I need one 'U' callsign to complete my SASAC.

In my log, I have AA9UF, CG9UN, K6UAS, KA8UNI, KC9UR, KJ6UF, N2UJN, W6U.

I'm off work until 2 January and I'd love to finish this one up. Any 'U's
who are reading this and can work a sked, please let me know. 20 and 40
meters are best for me, but I can do 10 - 160.

73,

Mike
WM4B
#348


 


Re: DM85 & DM74

Richard Rohrer
 

Jerry and Steve,

 

We seem to be going thru this grid more than I would have thought.  Seem to be doing the I40 thru TX, NM, and AZ a lot this year.  So we  will see what 2018 brings.

 

73

Dick

KC3EF

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Jerry N9AVY
Sent: Wednesday, December 27, 2017 10:40 PM
To: 070Club@groups.io
Subject: Re: [070Club] DM85 & DM74

 

Bummer !  Have to work tomorrow and won't be home .  Need DM85.   Maybe another time...

Jerry  N9AVY


From: Richard Rohrer <kc3ef@...>
To: 070Club@groups.io
Sent: Wednesday, December 27, 2017 9:21 PM
Subject: [070Club] DM85 & DM74

 

I plan on leaving Amarillo, TX around 10:30 MST.  DM85 starts about 10 miles from Amarillo, so I will start calling then.  
DM74 is about 2 1/4 hours from Amarillo, so should be in that grid around 12:30 give or take.  I40 runs along the top of the grid, so only a few miles in that grid, from past Cuervo, NM to Clings Corners, NM.  If there is demand will stop at the rest stop to make contacts.  

I will be on 20 mtrs, running about 80 watts using call sign of KC3EF/M for this effort.  

73
Dick
KC3EF

 


Re: DM85 & DM74

Richard Rohrer
 

Need to fix the times.  Should be in EST.  Should have used GMT, which will be 1500 for DM85 and 1730 for DM74.

 

Dick

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Jerry N9AVY
Sent: Wednesday, December 27, 2017 10:40 PM
To: 070Club@groups.io
Subject: Re: [070Club] DM85 & DM74

 

Bummer !  Have to work tomorrow and won't be home .  Need DM85.   Maybe another time...

Jerry  N9AVY


From: Richard Rohrer <kc3ef@...>
To: 070Club@groups.io
Sent: Wednesday, December 27, 2017 9:21 PM
Subject: [070Club] DM85 & DM74

 

I plan on leaving Amarillo, TX around 10:30 MST.  DM85 starts about 10 miles from Amarillo, so I will start calling then.  
DM74 is about 2 1/4 hours from Amarillo, so should be in that grid around 12:30 give or take.  I40 runs along the top of the grid, so only a few miles in that grid, from past Cuervo, NM to Clings Corners, NM.  If there is demand will stop at the rest stop to make contacts.  

I will be on 20 mtrs, running about 80 watts using call sign of KC3EF/M for this effort.  

73
Dick
KC3EF

 


Re: DM85 & DM74

Stephen Melachrinos
 

And I'm on vacation without the radio (as I had expected). Thanks for the effort, Dick. I hope some others find you.

Steve
W3HF

On Dec 27, 2017 10:40 PM, Jerry N9AVY <n9avy@...> wrote:
Bummer !  Have to work tomorrow and won't be home .  Need DM85.   Maybe another time...
Jerry  N9AVY


From: Richard Rohrer <kc3ef@...>
To: 070Club@groups.io
Sent: Wednesday, December 27, 2017 9:21 PM
Subject: [070Club] DM85 & DM74

I plan on leaving Amarillo, TX around 10:30 MST.  DM85 starts about 10 miles from Amarillo, so I will start calling then.  
DM74 is about 2 1/4 hours from Amarillo, so should be in that grid around 12:30 give or take.  I40 runs along the top of the grid, so only a few miles in that grid, from past Cuervo, NM to Clings Corners, NM.  If there is demand will stop at the rest stop to make contacts.  

I will be on 20 mtrs, running about 80 watts using call sign of KC3EF/M for this effort.  

73
Dick
KC3EF



Re: Replying to Welcome Messages

Barry 1470 <boat.anchor@...>
 

Good point Ray


On Wed, Dec 27, 2017 at 07:16 pm, Ray Clements wrote:
I do not believe it is wise to add members to the group without their prior permission. This group has a lot of traffic, especially during special events. There have been a few times I have been inundated with emails and considered dropping my name from the group. However, since my Internet connection is very fast, I just delete the 070 emails I do not wish to read.
 
Not all members have high-speed Internet with unlimited usage. For those with limited Internet speeds or metered usage, the volume of email generated by the group could be problematic.
 
I suggest that the application form be modified to ask the question "Would you like to be included in the 070Club group on groups.io? This will enable you to send and receive emails to and from other group members.  Please indicate:  Yes / No ?"
 
Ray N9RWC


------ Original Message ------
Received: 08:51 PM CST, 12/27/2017
From: "Barry 1470 via Groups.Io" <boat.anchor@...>
To: 070Club@groups.io
Subject: Re: [070Club] Replying to Welcome Messages


Jim
Maybe we cud take the approach that their application includes
membership in the group and sign them up when approved. That way they
wud see the emails.
regards
Barry


On Wed, Dec 27, 2017 at 05:35 pm, Jim K5SP wrote:
Yeah, I discovered that after I sent that message.  Will have to figure out how to make sure replies get to the new member if they are not on the reflector.

Jim, K5SP

On 12/27/2017 5:55 PM, Barry 1470 via Groups.Io wrote:
Jim
I reply using web interface at https://groups.io/g/070Club/message/54514
I do not seem to find any way to Reply All
HNY
Barry

On Wed, Dec 27, 2017 at 11:29 am, Jim K5SP wrote:
I send out the welcome messages to new members right after I send them their membership email.

When you reply to one of those welcome messages most likely the new member has not requested access to the group, therefore they may not see your response.

When I send the welcome message it goes to the group and the new member via his email address, so maybe a reply to all might ensure he gets your response.

--
Jim,  K5SP #483
Member Services Director


--
Jim,  K5SP #483
Member Services Director


Re: DM85 & DM74

Bill-N7RI
 

I can use both so I'll be watching from WY.
Bill
KC8WSM 
070-1191



On Wed, Dec 27, 2017 at 8:21 PM, Richard Rohrer <kc3ef@...> wrote:
I plan on leaving Amarillo, TX around 10:30 MST.  DM85 starts about 10 miles from Amarillo, so I will start calling then.  
DM74 is about 2 1/4 hours from Amarillo, so should be in that grid around 12:30 give or take.  I40 runs along the top of the grid, so only a few miles in that grid, from past Cuervo, NM to Clings Corners, NM.  If there is demand will stop at the rest stop to make contacts.  

I will be on 20 mtrs, running about 80 watts using call sign of KC3EF/M for this effort.  

73
Dick
KC3EF



Re: DM85 & DM74

Jerry N9AVY
 

Bummer !  Have to work tomorrow and won't be home .  Need DM85.   Maybe another time...
Jerry  N9AVY


From: Richard Rohrer <kc3ef@...>
To: 070Club@groups.io
Sent: Wednesday, December 27, 2017 9:21 PM
Subject: [070Club] DM85 & DM74

I plan on leaving Amarillo, TX around 10:30 MST.  DM85 starts about 10 miles from Amarillo, so I will start calling then.  
DM74 is about 2 1/4 hours from Amarillo, so should be in that grid around 12:30 give or take.  I40 runs along the top of the grid, so only a few miles in that grid, from past Cuervo, NM to Clings Corners, NM.  If there is demand will stop at the rest stop to make contacts.  

I will be on 20 mtrs, running about 80 watts using call sign of KC3EF/M for this effort.  

73
Dick
KC3EF



Re: Replying to Welcome Messages

Jim K5SP
 

Well stated Ray. Many members have more than one email, and it is not possible for management to determine which one they would want to register to the reflector with.

Not all members belong to the group, for example we have 2586 members and only a small fraction belong to the 070 group, and even smaller to 070_contests group.

JIM K5SP 


Sent via the Samsung Galaxy S®6 active, an AT&T 4G LTE smartphone

-------- Original message --------
From: Ray Clements <r.clements@...>
Date: 12/27/17 9:16 PM (GMT-06:00)
To: 070Club@groups.io
Subject: Re: [070Club] Replying to Welcome Messages

I do not believe it is wise to add members to the group without their prior permission. This group has a lot of traffic, especially during special events. There have been a few times I have been inundated with emails and considered dropping my name from the group. However, since my Internet connection is very fast, I just delete the 070 emails I do not wish to read.

Not all members have high-speed Internet with unlimited usage. For those with limited Internet speeds or metered usage, the volume of email generated by the group could be problematic.

I suggest that the application form be modified to ask the question "Would you like to be included in the 070Club group on groups.io? This will enable you to send and receive emails to and from other group members.  Please indicate:  Yes / No ?"

Ray N9RWC


------ Original Message ------
Received: 08:51 PM CST, 12/27/2017
From: "Barry 1470 via Groups.Io" <boat.anchor@...>
To: 070Club@groups.io
Subject: Re: [070Club] Replying to Welcome Messages


Jim
Maybe we cud take the approach that their application includes
membership in the group and sign them up when approved. That way they
wud see the emails.
regards
Barry


On Wed, Dec 27, 2017 at 05:35 pm, Jim K5SP wrote:
Yeah, I discovered that after I sent that message.  Will have to figure out how to make sure replies get to the new member if they are not on the reflector.

Jim, K5SP

On 12/27/2017 5:55 PM, Barry 1470 via Groups.Io wrote:
Jim
I reply using web interface at https://groups.io/g/070Club/message/54514
I do not seem to find any way to Reply All
HNY
Barry

On Wed, Dec 27, 2017 at 11:29 am, Jim K5SP wrote:
I send out the welcome messages to new members right after I send them their membership email.

When you reply to one of those welcome messages most likely the new member has not requested access to the group, therefore they may not see your response.

When I send the welcome message it goes to the group and the new member via his email address, so maybe a reply to all might ensure he gets your response.

--
Jim,  K5SP #483
Member Services Director


--
Jim,  K5SP #483
Member Services Director



--
Jim,  K5SP #483
Member Services Director


DM85 & DM74

Richard Rohrer
 

I plan on leaving Amarillo, TX around 10:30 MST.  DM85 starts about 10 miles from Amarillo, so I will start calling then.  
DM74 is about 2 1/4 hours from Amarillo, so should be in that grid around 12:30 give or take.  I40 runs along the top of the grid, so only a few miles in that grid, from past Cuervo, NM to Clings Corners, NM.  If there is demand will stop at the rest stop to make contacts.  

I will be on 20 mtrs, running about 80 watts using call sign of KC3EF/M for this effort.  

73
Dick
KC3EF


Re: Replying to Welcome Messages

Ray Clements
 

I do not believe it is wise to add members to the group without their prior permission. This group has a lot of traffic, especially during special events. There have been a few times I have been inundated with emails and considered dropping my name from the group. However, since my Internet connection is very fast, I just delete the 070 emails I do not wish to read.

Not all members have high-speed Internet with unlimited usage. For those with limited Internet speeds or metered usage, the volume of email generated by the group could be problematic.

I suggest that the application form be modified to ask the question "Would you like to be included in the 070Club group on groups.io? This will enable you to send and receive emails to and from other group members.  Please indicate:  Yes / No ?"

Ray N9RWC


------ Original Message ------
Received: 08:51 PM CST, 12/27/2017
From: "Barry 1470 via Groups.Io" <boat.anchor@...>
To: 070Club@groups.io
Subject: Re: [070Club] Replying to Welcome Messages


Jim
Maybe we cud take the approach that their application includes
membership in the group and sign them up when approved. That way they
wud see the emails.
regards
Barry


On Wed, Dec 27, 2017 at 05:35 pm, Jim K5SP wrote:
Yeah, I discovered that after I sent that message.  Will have to figure out how to make sure replies get to the new member if they are not on the reflector.

Jim, K5SP

On 12/27/2017 5:55 PM, Barry 1470 via Groups.Io wrote:
Jim
I reply using web interface at https://groups.io/g/070Club/message/54514
I do not seem to find any way to Reply All
HNY
Barry

On Wed, Dec 27, 2017 at 11:29 am, Jim K5SP wrote:
I send out the welcome messages to new members right after I send them their membership email.

When you reply to one of those welcome messages most likely the new member has not requested access to the group, therefore they may not see your response.

When I send the welcome message it goes to the group and the new member via his email address, so maybe a reply to all might ensure he gets your response.

--
Jim,  K5SP #483
Member Services Director


--
Jim,  K5SP #483
Member Services Director



Re: Replying to Welcome Messages

Barry 1470 <boat.anchor@...>
 

Jim
Maybe we cud take the approach that their application includes
membership in the group and sign them up when approved. That way they
wud see the emails.
regards
Barry


On Wed, Dec 27, 2017 at 05:35 pm, Jim K5SP wrote:
Yeah, I discovered that after I sent that message.  Will have to figure out how to make sure replies get to the new member if they are not on the reflector.

Jim, K5SP

On 12/27/2017 5:55 PM, Barry 1470 via Groups.Io wrote:
Jim
I reply using web interface at https://groups.io/g/070Club/message/54514
I do not seem to find any way to Reply All
HNY
Barry

On Wed, Dec 27, 2017 at 11:29 am, Jim K5SP wrote:
I send out the welcome messages to new members right after I send them their membership email.

When you reply to one of those welcome messages most likely the new member has not requested access to the group, therefore they may not see your response.

When I send the welcome message it goes to the group and the new member via his email address, so maybe a reply to all might ensure he gets your response.

--
Jim,  K5SP #483
Member Services Director


--
Jim,  K5SP #483
Member Services Director


Re: I'm Baaaak!

 

Yo Larry!

You were missed!

Welcome back...

Milt.

N6MG

070-650

LONP #76

 

 

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of larry rockne
Sent: Wednesday, December 27, 2017 4:53 PM
To: 070Club@groups.io
Subject: [070Club] I'm Baaaak!

 

 

I want to thank the award folks and members for the 3 certificates and as many endorsements I rcvd while I was off.

 

2016 was not kind to me, and was in & out of the hospital 3 times, and in rehab once for a month.

 

When I got home I was not interested in Amateur radio, I returned to it in the spring of 2017. 

 

Anyway, have been working on 365+1, and just got back to the PODXS site, and hope to be in the next contest.

 

Larry WA7HDZ #404


Re: Replying to Welcome Messages

 

Barry...

If all goes as planned, we'll be able to work on ground wave!

J

Milt.

 

 

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Barry 1470 via Groups.Io
Sent: Wednesday, December 27, 2017 3:58 PM
To: 070Club@groups.io
Subject: Re: [070Club] Replying to Welcome Messages

 

WOWEE


On Wed, Dec 27, 2017 at 12:07 pm, Milton Garb wrote:

Milt.

 

Working on a 4 el., 40m yagi...The trick is how to use it on an APE expedition with Freddy, W0PE...

 

 

 

13141 - 13160 of 67684