Date   

Re: WSJT-X

Dan Morris - KZ3T
 

that is a possibility!!

Dan Morris







On Dec 15, 2017, at 8:17 PM, Mike Flowers <mike.flowers@...> wrote:

My version of ACLog has some features like ‘Voice Navigation’ and Audio Alerts.   I’ve not found where in ACLog that you get to select the playback device, so I’m left to conclude that ACLog uses the default playback device for these features.

Is there any possibility that the SignaLink sound card has become the default playback device?   Perhaps if this has happened, then WSJT-X and ACLog are contending for the SignaLink sound card.

Just a wild guess ...

-- Mike Flowers, K6MKF, NCDXC - "It's about DX!"

On Dec 15, 2017, at 11:46 AM, Dan Morris <dbmorris315@...> wrote:

For those who know a lot more about this program than I that might can answer this question.

I am trying to use WSJT-X and I notice sometimes when I switch back and forth to ACLog, the WSJT-X waterfall freezes.  I cannot find any way to refresh/sync that waterfall to unfreeze other than restarting the program.  Any help would be appreciated.  Thanks

Dan Morris  KZ3T  070-1065
dbmorris315@...

I live to live for Him!












Re: WSJT-X

Mike Flowers
 

My version of ACLog has some features like ‘Voice Navigation’ and Audio Alerts. I’ve not found where in ACLog that you get to select the playback device, so I’m left to conclude that ACLog uses the default playback device for these features.

Is there any possibility that the SignaLink sound card has become the default playback device? Perhaps if this has happened, then WSJT-X and ACLog are contending for the SignaLink sound card.

Just a wild guess ...

-- Mike Flowers, K6MKF, NCDXC - "It's about DX!"

On Dec 15, 2017, at 11:46 AM, Dan Morris <dbmorris315@gmail.com> wrote:

For those who know a lot more about this program than I that might can answer this question.

I am trying to use WSJT-X and I notice sometimes when I switch back and forth to ACLog, the WSJT-X waterfall freezes. I cannot find any way to refresh/sync that waterfall to unfreeze other than restarting the program. Any help would be appreciated. Thanks

Dan Morris KZ3T 070-1065
dbmorris315@gmail.com

I live to live for Him!







Re: WSJT-X

Dan Morris - KZ3T
 

thanks Rick

Dan Morris

I live to live for Him!




On Dec 15, 2017, at 7:44 PM, Rick - N7WE <n7we1980@...> wrote:

Dan-

Again I'm not knowledgeable on ACLog, but using JTAlert with HRD, WSJT-X creates a log entry in its log file and JTALERT automatically transfers the log entry and notifies you that it was successfully logged in HRD. For some time, JTAlert did not support ACLog.  I understand it now does.  I think when that happened it solved the problems with some info not transferring, but I'm not sure.  There is a JTAlert groups.io called HamApps     https://hamapps.groups.io/g/Support/topics.  It has lots of postings about ACLog both before and after they started supporting it.  Hope that helps.



On 12/15/2017 18:54, Dan Morris wrote:
rick — Well, I do not use JT Alert — I heard some data fields are not transferred over to ACLog.  But, I may give it a try and see what happens.  When I log the call in WSJT-X , does that automatically log the contact in ACLog also???

Dan Morris

I live to live for Him!




--
Rick - N7WE
070 - #1602


Re: WSJT-X

Rick - N7WE
 

Dan-

Again I'm not knowledgeable on ACLog, but using JTAlert with HRD, WSJT-X creates a log entry in its log file and JTALERT automatically transfers the log entry and notifies you that it was successfully logged in HRD. For some time, JTAlert did not support ACLog.  I understand it now does.  I think when that happened it solved the problems with some info not transferring, but I'm not sure.  There is a JTAlert groups.io called HamApps     https://hamapps.groups.io/g/Support/topics.  It has lots of postings about ACLog both before and after they started supporting it.  Hope that helps.



On 12/15/2017 18:54, Dan Morris wrote:
rick — Well, I do not use JT Alert — I heard some data fields are not transferred over to ACLog.  But, I may give it a try and see what happens.  When I log the call in WSJT-X , does that automatically log the contact in ACLog also???

Dan Morris

I live to live for Him!




--
Rick - N7WE
070 - #1602


Re: WSJT-X

Dan Morris - KZ3T
 

Mike - I’m using the latest version of WSJT-X program.

Dan Morris

I live to live for Him!




On Dec 15, 2017, at 4:38 PM, Mike Besemer <mwbesemer@...> wrote:

Dan,

Are you using the latest version of WSTJ-X or a development version?  

If that's not it, it sounds like a resource issue.  I run that combination
with no issues.

I'll be glad to help if there is anything I can do.

Mike
WM4B

-----Original Message-----
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Dan Morris
Sent: Friday, December 15, 2017 2:47 PM
To: 070Club@groups.io
Subject: [070Club] WSJT-X

For those who know a lot more about this program than I that might can
answer this question.

I am trying to use WSJT-X and I notice sometimes when I switch back and
forth to ACLog, the WSJT-X waterfall freezes.  I cannot find any way to
refresh/sync that waterfall to unfreeze other than restarting the program.
Any help would be appreciated.  Thanks

Dan Morris  KZ3T  070-1065
dbmorris315@...

I live to live for Him!












Re: WSJT-X

Dan Morris - KZ3T
 

WSJT-X is the digital program I’m running.  I was talking about the PSK Express program which I use for PSK.  Sri bout that

Dan Morris

I live to live for Him!




On Dec 15, 2017, at 6:51 PM, brian whoeler <n2mlp@...> wrote:

How do you have a waterfall if no digital program running

 

========================

         de N2MLP Brian

       Monroe County PA

 

 

<image001.jpg>

========================

 

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Dan Morris
Sent: Friday, December 15, 2017 6:49 PM
To: 070Club@groups.io
Subject: Re: [070Club] WSJT-X

 

No, ACLog has nothing to do with the Signalink as far as I know.  I do not use rig control at all.  The only thing that ties in to the Signalink would be my digital program which is not running at all.


Dan Morris

 

I live to live for Him!

 

 

 

On Dec 15, 2017, at 3:06 PM, brian whoeler <n2mlp@...> wrote:

 

Is Aclog looking at address of the  signalink USB?

 

========================

         de N2MLP Brian

       Monroe County PA

 

 

<image001.jpg>

========================

 

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Dan Morris
Sent: Friday, December 15, 2017 2:53 PM
To: 070Club@groups.io
Subject: Re: [070Club] WSJT-X

 

Sound card is working okay and it does not do this when using my regular digital program. I’m using Signalink USB!!


Dan Morris

 

I live to live for Him!

 

 

 

On Dec 15, 2017, at 2:51 PM, brian whoeler <n2mlp@...> wrote:

 

Sound like sound card  problem

========================
         de N2MLP Brian
       Monroe County PA



========================



-----Original Message-----
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Dan Morris
Sent: Friday, December 15, 2017 2:47 PM
To: 070Club@groups.io
Subject: [070Club] WSJT-X

For those who know a lot more about this program than I that might can
answer this question.

I am trying to use WSJT-X and I notice sometimes when I switch back and
forth to ACLog, the WSJT-X waterfall freezes.  I cannot find any way to
refresh/sync that waterfall to unfreeze other than restarting the program.
Any help would be appreciated.  Thanks

Dan Morris  KZ3T  070-1065
dbmorris315@...

I live to live for Him!











 

 




Re: WSJT-X

Brian (N2MLP)
 

How do you have a waterfall if no digital program running

 

========================

         de N2MLP Brian

       Monroe County PA

 

 

========================

 

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Dan Morris
Sent: Friday, December 15, 2017 6:49 PM
To: 070Club@groups.io
Subject: Re: [070Club] WSJT-X

 

No, ACLog has nothing to do with the Signalink as far as I know.  I do not use rig control at all.  The only thing that ties in to the Signalink would be my digital program which is not running at all.


Dan Morris

 

I live to live for Him!

 

 

 

On Dec 15, 2017, at 3:06 PM, brian whoeler <n2mlp@...> wrote:

 

Is Aclog looking at address of the  signalink USB?

 

========================

         de N2MLP Brian

       Monroe County PA

 

 

<image001.jpg>

========================

 

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Dan Morris
Sent: Friday, December 15, 2017 2:53 PM
To: 070Club@groups.io
Subject: Re: [070Club] WSJT-X

 

Sound card is working okay and it does not do this when using my regular digital program. I’m using Signalink USB!!


Dan Morris

 

I live to live for Him!

 

 

 

On Dec 15, 2017, at 2:51 PM, brian whoeler <n2mlp@...> wrote:

 

Sound like sound card  problem

========================
         de N2MLP Brian
       Monroe County PA



========================



-----Original Message-----
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Dan Morris
Sent: Friday, December 15, 2017 2:47 PM
To: 070Club@groups.io
Subject: [070Club] WSJT-X

For those who know a lot more about this program than I that might can
answer this question.

I am trying to use WSJT-X and I notice sometimes when I switch back and
forth to ACLog, the WSJT-X waterfall freezes.  I cannot find any way to
refresh/sync that waterfall to unfreeze other than restarting the program.
Any help would be appreciated.  Thanks

Dan Morris  KZ3T  070-1065
dbmorris315@...

I live to live for Him!











 

 


Re: WSJT-X

Dan Morris - KZ3T
 

No, ACLog has nothing to do with the Signalink as far as I know.  I do not use rig control at all.  The only thing that ties in to the Signalink would be my digital program which is not running at all.

Dan Morris

I live to live for Him!




On Dec 15, 2017, at 3:06 PM, brian whoeler <n2mlp@...> wrote:

Is Aclog looking at address of the  signalink USB?
 
========================
         de N2MLP Brian
       Monroe County PA
 
 
<image001.jpg>
========================
 
 
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Dan Morris
Sent: Friday, December 15, 2017 2:53 PM
To: 070Club@groups.io
Subject: Re: [070Club] WSJT-X
 
Sound card is working okay and it does not do this when using my regular digital program. I’m using Signalink USB!!

Dan Morris
 
I live to live for Him!
 

 

 
On Dec 15, 2017, at 2:51 PM, brian whoeler <n2mlp@...> wrote:
 

Sound like sound card  problem

========================
         de N2MLP Brian
       Monroe County PA



========================



-----Original Message-----
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Dan Morris
Sent: Friday, December 15, 2017 2:47 PM
To: 070Club@groups.io
Subject: [070Club] WSJT-X

For those who know a lot more about this program than I that might can
answer this question.

I am trying to use WSJT-X and I notice sometimes when I switch back and
forth to ACLog, the WSJT-X waterfall freezes.  I cannot find any way to
refresh/sync that waterfall to unfreeze other than restarting the program.
Any help would be appreciated.  Thanks

Dan Morris  KZ3T  070-1065
dbmorris315@...

I live to live for Him!










 



Re: WSJT-X

Mike Besemer <mwbesemer@...>
 

Dan,

Are you using the latest version of WSTJ-X or a development version?

If that's not it, it sounds like a resource issue. I run that combination
with no issues.

I'll be glad to help if there is anything I can do.

Mike
WM4B

-----Original Message-----
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Dan Morris
Sent: Friday, December 15, 2017 2:47 PM
To: 070Club@groups.io
Subject: [070Club] WSJT-X

For those who know a lot more about this program than I that might can
answer this question.

I am trying to use WSJT-X and I notice sometimes when I switch back and
forth to ACLog, the WSJT-X waterfall freezes. I cannot find any way to
refresh/sync that waterfall to unfreeze other than restarting the program.
Any help would be appreciated. Thanks

Dan Morris KZ3T 070-1065
dbmorris315@gmail.com

I live to live for Him!


Re: 40M

Matthew King - AK4MK <kk4cps@...>
 

I rarely see anything (PSK-31wise, anyhow) on forty meters unless it's at night.  Could be my antenna setup, or just that I'm not looking that diligently on forty.

Glad you got somebody at least!

73

Matt King
AK4MK - 070 #1708
PODXS 070 Club Executive Director


On Fri, Dec 15, 2017 at 9:42 AM, Dan Morris <dbmorris315@...> wrote:
Wow, 40M is awful quiet.  I’ve been calling for about 1/2 hour now and not a trace of a signal!!!

Dan Morris  KZ3T
dbmorris315@...

I live to live for Him!








Re: 2017 Contest Certificates/Dog Tags

Jerry N9AVY
 

Byron:


Sounds likea place where anything you type "can and will be held against you" !   
Jerry  N9AVY


From: W7RIV <nnegrom@...>
To: 070Club@groups.io
Sent: Friday, December 15, 2017 11:15 AM
Subject: Re: [070Club] 2017 Contest Certificates/Dog Tags

I've started using Google Docs for these types of things. Extremely easy to use, multiple people can be in the same document at the same time, its online, and is pretty much saved as you type. If you want me to set something up, let me know.

Bryon

On Fri, Dec 15, 2017 at 8:01 AM, Joseph Molon <ljl2002@...> wrote:
Matt,
 
No problem.  With all that you do it's a wonder that you can keep up with the paperwork and still find the time to DX and contest.  Thank You.
 
For 2017 I received:
 
31 Flavors
Psk Fest
40m Firecracker Sprint
Financial Support
 
Alas no Dog Tags yet.
 
Enjoy the holidays.
 
Joe
KA1PPV  #1482
 
 
 
On Thu, Dec 14, 2017 at 03:31 PM, Matthew King - AK4MK wrote:
 
 
This is pretty sad, but I've lost my list of 2017 Contest Certificate recipients for the year.  That is to say, I don't have a list of people that I've already sent the certificates and Rollo Dog Tags to so far this year.

Anybody that has received one for 2017, PLEASE let me know. I'm trying to avoid sending out duplicates, especially on the dog tags.

~hanging head~

73

Matt King
AK4MK - 070 #1708
PODXS 070 Club Executive Director





Virus-free. www.avg.com


Re: WSJT-X

Brian (N2MLP)
 

Is Aclog looking at address of the  signalink USB?

 

========================

         de N2MLP Brian

       Monroe County PA

 

 

========================

 

 

From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Dan Morris
Sent: Friday, December 15, 2017 2:53 PM
To: 070Club@groups.io
Subject: Re: [070Club] WSJT-X

 

Sound card is working okay and it does not do this when using my regular digital program. I’m using Signalink USB!!


Dan Morris

 

I live to live for Him!

 

 

 

On Dec 15, 2017, at 2:51 PM, brian whoeler <n2mlp@...> wrote:

 

Sound like sound card  problem

========================
         de N2MLP Brian
       Monroe County PA



========================



-----Original Message-----
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Dan Morris
Sent: Friday, December 15, 2017 2:47 PM
To: 070Club@groups.io
Subject: [070Club] WSJT-X

For those who know a lot more about this program than I that might can
answer this question.

I am trying to use WSJT-X and I notice sometimes when I switch back and
forth to ACLog, the WSJT-X waterfall freezes.  I cannot find any way to
refresh/sync that waterfall to unfreeze other than restarting the program.
Any help would be appreciated.  Thanks

Dan Morris  KZ3T  070-1065
dbmorris315@...

I live to live for Him!










 


Re: WSJT-X

Dan Morris - KZ3T
 

Sound card is working okay and it does not do this when using my regular digital program. I’m using Signalink USB!!

Dan Morris

I live to live for Him!




On Dec 15, 2017, at 2:51 PM, brian whoeler <n2mlp@...> wrote:

Sound like sound card  problem

========================
         de N2MLP Brian
       Monroe County PA



========================



-----Original Message-----
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Dan Morris
Sent: Friday, December 15, 2017 2:47 PM
To: 070Club@groups.io
Subject: [070Club] WSJT-X

For those who know a lot more about this program than I that might can
answer this question.

I am trying to use WSJT-X and I notice sometimes when I switch back and
forth to ACLog, the WSJT-X waterfall freezes.  I cannot find any way to
refresh/sync that waterfall to unfreeze other than restarting the program.
Any help would be appreciated.  Thanks

Dan Morris  KZ3T  070-1065
dbmorris315@...

I live to live for Him!













Re: WSJT-X

Brian (N2MLP)
 

Sound like sound card problem

========================
         de N2MLP Brian
       Monroe County PA



========================

-----Original Message-----
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Dan Morris
Sent: Friday, December 15, 2017 2:47 PM
To: 070Club@groups.io
Subject: [070Club] WSJT-X

For those who know a lot more about this program than I that might can
answer this question.

I am trying to use WSJT-X and I notice sometimes when I switch back and
forth to ACLog, the WSJT-X waterfall freezes. I cannot find any way to
refresh/sync that waterfall to unfreeze other than restarting the program.
Any help would be appreciated. Thanks

Dan Morris KZ3T 070-1065
dbmorris315@gmail.com

I live to live for Him!


WSJT-X

Dan Morris - KZ3T
 

For those who know a lot more about this program than I that might can answer this question.

I am trying to use WSJT-X and I notice sometimes when I switch back and forth to ACLog, the WSJT-X waterfall freezes. I cannot find any way to refresh/sync that waterfall to unfreeze other than restarting the program. Any help would be appreciated. Thanks

Dan Morris KZ3T 070-1065
dbmorris315@gmail.com

I live to live for Him!


Re: 2017 Contest Certificates/Dog Tags

Jim K5SP
 

OneDrive is what I use, it allows documents to be saved as public, and you can send the link info to those you want to see the document.

Also you can create, edit, any of the Microsoft office apps,  Word, Excel, Powerpoint etc., in onedrive, and you get over a gig of storage.  (I currently have 1TB of storage avail on onedrive, a perk I got while teaching college classes).

Jim K5SP

On 12/15/2017 11:15 AM, W7RIV wrote:
I've started using Google Docs for these types of things. Extremely easy to use, multiple people can be in the same document at the same time, its online, and is pretty much saved as you type. If you want me to set something up, let me know.

Bryon

On Fri, Dec 15, 2017 at 8:01 AM, Joseph Molon <ljl2002@...> wrote:
Matt,
 
No problem.  With all that you do it's a wonder that you can keep up with the paperwork and still find the time to DX and contest.  Thank You.
 
For 2017 I received:
 
31 Flavors
Psk Fest
40m Firecracker Sprint
Financial Support
 
Alas no Dog Tags yet.
 
Enjoy the holidays.
 
Joe
KA1PPV  #1482
 
 
 
On Thu, Dec 14, 2017 at 03:31 PM, Matthew King - AK4MK wrote:
 
 
This is pretty sad, but I've lost my list of 2017 Contest Certificate recipients for the year.  That is to say, I don't have a list of people that I've already sent the certificates and Rollo Dog Tags to so far this year.

Anybody that has received one for 2017, PLEASE let me know. I'm trying to avoid sending out duplicates, especially on the dog tags.

~hanging head~

73

Matt King
AK4MK - 070 #1708
PODXS 070 Club Executive Director




--
Jim,  K5SP #483
Member Services Director


Re: 2017 Contest Certificates/Dog Tags

W7RIV
 

I've started using Google Docs for these types of things. Extremely easy to use, multiple people can be in the same document at the same time, its online, and is pretty much saved as you type. If you want me to set something up, let me know.

Bryon

On Fri, Dec 15, 2017 at 8:01 AM, Joseph Molon <ljl2002@...> wrote:
Matt,
 
No problem.  With all that you do it's a wonder that you can keep up with the paperwork and still find the time to DX and contest.  Thank You.
 
For 2017 I received:
 
31 Flavors
Psk Fest
40m Firecracker Sprint
Financial Support
 
Alas no Dog Tags yet.
 
Enjoy the holidays.
 
Joe
KA1PPV  #1482
 
 
 
On Thu, Dec 14, 2017 at 03:31 PM, Matthew King - AK4MK wrote:
 
 
This is pretty sad, but I've lost my list of 2017 Contest Certificate recipients for the year.  That is to say, I don't have a list of people that I've already sent the certificates and Rollo Dog Tags to so far this year.

Anybody that has received one for 2017, PLEASE let me know. I'm trying to avoid sending out duplicates, especially on the dog tags.

~hanging head~

73

Matt King
AK4MK - 070 #1708
PODXS 070 Club Executive Director



Re: 2017 Contest Certificates/Dog Tags

Joseph Molon <ljl2002@...>
 

Matt,
 
No problem.  With all that you do it's a wonder that you can keep up with the paperwork and still find the time to DX and contest.  Thank You.
 
For 2017 I received:
 
31 Flavors
Psk Fest
40m Firecracker Sprint
Financial Support
 
Alas no Dog Tags yet.
 
Enjoy the holidays.
 
Joe
KA1PPV  #1482
 
 
 

On Thu, Dec 14, 2017 at 03:31 PM, Matthew King - AK4MK wrote:
 
 
This is pretty sad, but I've lost my list of 2017 Contest Certificate recipients for the year.  That is to say, I don't have a list of people that I've already sent the certificates and Rollo Dog Tags to so far this year.

Anybody that has received one for 2017, PLEASE let me know. I'm trying to avoid sending out duplicates, especially on the dog tags.

~hanging head~

73

Matt King
AK4MK - 070 #1708
PODXS 070 Club Executive Director


Re: 40M

Dan Morris - KZ3T
 

Yea, right after I sent that email, N2CST gave me a call!! Go figure hihi

Dan Morris

I live to live for Him!




On Dec 15, 2017, at 9:49 AM, Harry Wilkins <k9hw@...> wrote:

See you and N2CST here in Minneapolis.  Not great signal strength and QSB makes print difficult but radable (mostly).

Harry K9HW




-----Original Message-----
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Dan Morris
Sent: Friday, December 15, 2017 8:42 AM
To: 070Club@groups.io
Subject: [070Club] 40M

Wow, 40M is awful quiet.  I’ve been calling for about 1/2 hour now and not a trace of a signal!!!

Dan Morris  KZ3T
dbmorris315@...

I live to live for Him!











Re: 40M

Harry Wilkins
 

See you and N2CST here in Minneapolis. Not great signal strength and QSB makes print difficult but radable (mostly).

Harry K9HW

-----Original Message-----
From: 070Club@groups.io [mailto:070Club@groups.io] On Behalf Of Dan Morris
Sent: Friday, December 15, 2017 8:42 AM
To: 070Club@groups.io
Subject: [070Club] 40M

Wow, 40M is awful quiet. I’ve been calling for about 1/2 hour now and not a trace of a signal!!!

Dan Morris KZ3T
dbmorris315@gmail.com

I live to live for Him!

13721 - 13740 of 67908