Date   

Re: DM49 Expedition

boat.anchor@...
 

Bryon
 
If the opportunity ever comes up I am looking for DM38, DM,39 and DM47
If you should stray far from home I also need DM28
 
Best regards
Barry
 
VB7150/VA7GEM/CF7GEM

BTW your ARRL email is bouncing


Re: DM49 Expedition

Paul <nu4c@...>
 

Bryon,
I have medical appt near that time. If I get home I will try for you. Do you know what County you will be In? 
73
Paul nu4c



Sent from my Galaxy Tab® A

-------- Original message --------
From: "Bryon nnegrom@... [070]" <070@...>
Date: 7/25/17 00:39 (GMT-05:00)
To: 070@...
Subject: [070] DM49 Expedition

 

Okay, everyone that needs DM49, I'm going to be going out to Price and operate for a couple hours. I have N4GBK, KC1BOS, and NU4C that have mentioned they need it. I'll be there around 11a Mountain Time. I think I'll set up my antenna looking NE.

I'm happy to take suggestions. This is going to be a test run. I'll be down here again maybe even in August. I plan on going APE  to DM39 at some point.

Message me and stay in touch. Happy to send you my cell phone if you want to try and make sure we meet up.

Bryon, W7RIV


Re: That Windom

mwbesemer@...
 


Re: That Windom [1 Attachment]

Jim K5SP
 

You have lots of trees� and space.�

If you want to get it higher up and place it where you want it, try this:

Recently my wire came down in a storm it had broken off at the insulator.� So instead of messing with the slingshot, bow and arrow that I have used in the past, called my grandson and had him bring his drone over.� Tied some light fishing line to the drone and end of antenna.� Flew drone up and over the tree, pulled antenna up via the fishing line and then tied it off.

Worked like a charm, and now have the antenna up in the highest part of the tree.

Jim, K5SP

On 7/24/2017 8:02 PM, Bill Garwood n4gbk@... [070] wrote:
�

Hi Rick,


My Carolina Windom 160�is about 20 feet off the ground at the short end and 35 feet up�on the long end. �The OCF feedline is 22 feet long and it just clears the ground. �The manufacturer recommends 40 feet or higher for this model. �I"m sure it would perform better on 160 and 80 if I could get it up higher but I have lots of QSOs on both of those bands. �See picture of feed. �The Carolina Windom is a trademarked antenna sold by The Radio Works. �http://www.radioworks.com/.


I see on their site that they are shutting down soon. �The owner is getting older and needs to cut back. �I hope someone, somewhere picks up the Carolina Windom line of antennas as everyone I've ever spoken with has nothing but good things to say. �This design has a vertical and a horizontal radiator that seems to make it work better than some other wire antennas. �I know there are folks who swear by their G5RV, Bazooka and all sorts of trap antennas. �I get it. �An 80 meter version may be what you can use?


Mine has been up continuously for over 4 years. �I used some black, UV protected, stretchy rope that I bought with the antenna at a Ham Fest. � The slingshot antenna launcher eventually got it into the trees. �My aim was not good. �"You'll shoot your eye out". �No pulleys etc. �Wrapped a long length of the rope around the tree at each end and I think that might also have some give and take in the wind. �It bounces up and down a lot in high winds. �It does get very windy here and it has stayed up during tropical storms, Nor'easters and thunderstorms. �I am just a few miles from the Amazon Wind Farm so we got wind. �http://www.avangridrenewables.us/amazonwind/


I guess they are now using drones to get antennas into trees? �It should be much more accurate than the slingshot. �Anyway, the antenna off center feed�balun needs some kind of support. �A fiberglass pole or tree. �Let me know if you have other questions.�


73 and Happy Radio!


Bill N4GBK

Amazon Wind Farm U.S. East, powered by Avangrid Renewables at Desert Wind Overview. The Amazon Wind Farm U.S. East (formerly known as the Desert Wind project), a ...


Manufacturer of high performance wire antennas, current-type baluns, line isolators, and wire antenna parts and accessories. Catalog of products, antenna data and ...


From: Rick Butz
Sent: Sunday, July 23, 2017 5:23:50 PM
To: N4GBK
Subject: That Windom
�

Hi Bill -

Read your post on 070 and wanted to ask about your Carolina Windom.� I'm HOA restricted here to a vertical, but do have a couple of Oak trees in the back of the house (that opens up to wetlands and a river - no one behind me).� I definitely need some additional antenna, particularly for the lower bands and near distance.� I'm hoping I can do a stealth install that the roof line will block from view. You mentioned that your install is low.� How high is it? Are you installed using trees?� I'm not sure how I get a Windom up in them.� My tree climbing days are over... hi hi!� Trusty sling shot I guess.� If you are using trees, I'd appreciate any suggestions about pulleys and weights and so forth to handle the movement.� TU & 73,

Rick - N7WE



Re: DM49 Expedition

David, K9DWR
 

What bands do you plan on operating?


David, K9DWR
#1604 LONP #255
david@graniteweb.com

On Jul 24, 2017, at 23:39, Bryon nnegrom@gmail.com [070] <070@yahoogroups.com> wrote:


Okay, everyone that needs DM49, I'm going to be going out to Price and operate for a couple hours. I have N4GBK, KC1BOS, and NU4C that have mentioned they need it. I'll be there around 11a Mountain Time. I think I'll set up my antenna looking NE.

I'm happy to take suggestions. This is going to be a test run. I'll be down here again maybe even in August. I plan on going APE to DM39 at some point.

Message me and stay in touch. Happy to send you my cell phone if you want to try and make sure we meet up.


DM49 Expedition

W7RIV
 

Okay, everyone that needs DM49, I'm going to be going out to Price and operate for a couple hours. I have N4GBK, KC1BOS, and NU4C that have mentioned they need it. I'll be there around 11a Mountain Time. I think I'll set up my antenna looking NE.

I'm happy to take suggestions. This is going to be a test run. I'll be down here again maybe even in August. I plan on going APE  to DM39 at some point.

Message me and stay in touch. Happy to send you my cell phone if you want to try and make sure we meet up.

Bryon, W7RIV


Re: That Windom

Bill Garwood
 

Hi Rick,


My Carolina Windom 160 is about 20 feet off the ground at the short end and 35 feet up on the long end.  The OCF feedline is 22 feet long and it just clears the ground.  The manufacturer recommends 40 feet or higher for this model.  I"m sure it would perform better on 160 and 80 if I could get it up higher but I have lots of QSOs on both of those bands.  See picture of feed.  The Carolina Windom is a trademarked antenna sold by The Radio Works.  http://www.radioworks.com/.


I see on their site that they are shutting down soon.  The owner is getting older and needs to cut back.  I hope someone, somewhere picks up the Carolina Windom line of antennas as everyone I've ever spoken with has nothing but good things to say.  This design has a vertical and a horizontal radiator that seems to make it work better than some other wire antennas.  I know there are folks who swear by their G5RV, Bazooka and all sorts of trap antennas.  I get it.  An 80 meter version may be what you can use?


Mine has been up continuously for over 4 years.  I used some black, UV protected, stretchy rope that I bought with the antenna at a Ham Fest.   The slingshot antenna launcher eventually got it into the trees.  My aim was not good.  "You'll shoot your eye out".  No pulleys etc.  Wrapped a long length of the rope around the tree at each end and I think that might also have some give and take in the wind.  It bounces up and down a lot in high winds.  It does get very windy here and it has stayed up during tropical storms, Nor'easters and thunderstorms.  I am just a few miles from the Amazon Wind Farm so we got wind.  http://www.avangridrenewables.us/amazonwind/


I guess they are now using drones to get antennas into trees?  It should be much more accurate than the slingshot.  Anyway, the antenna off center feed balun needs some kind of support.  A fiberglass pole or tree.  Let me know if you have other questions. 


73 and Happy Radio!


Bill N4GBK

www.avangridrenewables.us
Amazon Wind Farm U.S. East, powered by Avangrid Renewables at Desert Wind Overview. The Amazon Wind Farm U.S. East (formerly known as the Desert Wind project), a ...


www.radioworks.com
Manufacturer of high performance wire antennas, current-type baluns, line isolators, and wire antenna parts and accessories. Catalog of products, antenna data and ...


From: Rick Butz
Sent: Sunday, July 23, 2017 5:23:50 PM
To: N4GBK
Subject: That Windom
 

Hi Bill -

Read your post on 070 and wanted to ask about your Carolina Windom.  I'm HOA restricted here to a vertical, but do have a couple of Oak trees in the back of the house (that opens up to wetlands and a river - no one behind me).  I definitely need some additional antenna, particularly for the lower bands and near distance.  I'm hoping I can do a stealth install that the roof line will block from view. You mentioned that your install is low.  How high is it? Are you installed using trees?  I'm not sure how I get a Windom up in them.  My tree climbing days are over... hi hi!  Trusty sling shot I guess.  If you are using trees, I'd appreciate any suggestions about pulleys and weights and so forth to handle the movement.  TU & 73,

Rick - N7WE


Re: 30M

Brian (N2MLP)
 

On 30M

21:39 utc

 

========================

         de N2MLP Brian

       Monroe County PA

 

 

========================

 

 

From: 070@... [mailto:070@...]
Sent: Monday, July 24, 2017 4:38 PM
To: 070@...
Subject: Re: [070] 30M

 

 

Right now, I'm using my digi mode rig, an FT897, with DM780

 

Randy W4RTT

 


From: 070@... <070@...> on behalf of Bryon nnegrom@... [070] <070@...>
Sent: Monday, July 24, 2017 3:11 PM
To: 070@...
Subject: Re: [070] 30M

 

 

Randy

 

What are you using for a Prop net Bot? 

 

Bryon, W7RIV

 

On Thu, Jul 20, 2017 at 4:58 PM, randy true w4rttrandy@... [070] <070@...> wrote:

 

Anyone going to give 30 a shot tonight?

Is anyone else running a Propnet Bot?

It has a nice feature whereby you can leave it run and see any QSO's that happen while you are away.

 

Randy W4RTT

 

 


Re: 30M

Randy True
 

Right now, I'm using my digi mode rig, an FT897, with DM780


Randy W4RTT



From: 070@... <070@...> on behalf of Bryon nnegrom@... [070] <070@...>
Sent: Monday, July 24, 2017 3:11 PM
To: 070@...
Subject: Re: [070] 30M
 
 

Randy

What are you using for a Prop net Bot? 

Bryon, W7RIV

On Thu, Jul 20, 2017 at 4:58 PM, randy true w4rttrandy@... [070] <070@...> wrote:
 

Anyone going to give 30 a shot tonight?

Is anyone else running a Propnet Bot?

It has a nice feature whereby you can leave it run and see any QSO's that happen while you are away.


Randy W4RTT




Re: 30M

W7RIV
 

Randy

What are you using for a Prop net Bot? 

Bryon, W7RIV

On Thu, Jul 20, 2017 at 4:58 PM, randy true w4rttrandy@... [070] <070@...> wrote:
 

Anyone going to give 30 a shot tonight?

Is anyone else running a Propnet Bot?

It has a nice feature whereby you can leave it run and see any QSO's that happen while you are away.


Randy W4RTT




Re: 366 Endorsement Status

David Blankenburg, AK7DB
 

I'm usually available after 10pm pacific time (05:00 UTC) if anyone needs a contact for their 365/366.Lately I haven't seen much activity then.  If you email me the same day I'll make sure to look for you. email is ak7db at cox dot net.

Dave, AK7DB


Re: Another new 24/7 !

Paul <nu4c@...>
 

WOO HOO Torbjorn. We come to the Branch. Now get some sleep.
73 de Paul 
NU4C


Sent from my Galaxy Tab® A

-------- Original message --------
From: "n7we1980@... [070]" <070@...>
Date: 7/24/17 10:19 (GMT-05:00)
To: 070@...
Subject: [070] Another new 24/7 !

 

Last Wednesday 7/19, SA7BXU - Torbjorn, became the 31st member to complete the 24/7 Endorsement. Please join me in congratulating him on this outstanding achievement.  24/7 requires completing a QSO in each of the 168 hour blocks making up the week.  It takes dedication, perseverance, and missing a lot of sleep!


Well done Torbjorn!  And welcome to the Branch with all the other 30 Hoot Owls!  We were each crazy to do it, but it was a Hoot!


Rick - N7WE

070 - #1602


Re: Another new 24/7 !

David, K9DWR
 

Congratulations!

For others that are interested in completing this, the way I did it was picked a few days where I would try to make a couple contacts, one just before the hour and then one just after, then take a nap until the next hour; rinse and repeat. Getting naps in-between worked a lot better than trying to have late-night marathons.


David, K9DWR
#1604 LONP #255
david@graniteweb.com

On Jul 24, 2017, at 09:37, Charles Odom ki4vmk@yahoo.com [070] <070@yahoogroups.com> wrote:


Wow, that would take a lot of coffee. Well done 👍👍
Charles
KI4VMK #2542
On Jul 24, 2017, at 9:32 AM, "'Paula Johnson' hamette@hushmail.com [070]" <070@yahoogroups.com> wrote:


Welcome to the branch of the night-owl tree! Well Done!


Re: Another new 24/7 !

Charles Odom <ki4vmk@...>
 

Wow, that would take a lot of coffee. Well done  👍👍
Charles
KI4VMK #2542

On Jul 24, 2017, at 9:32 AM, "'Paula Johnson' hamette@... [070]" <070@...> wrote:
 

Welcome to the branch of the night-owl tree! Well Done!

 

K7PAX – Paula - #1739

 

From: 070@... [mailto:070@...]
Sent: Monday, July 24, 2017 7:19 AM
To: 070@...
Subject: [070] Another new 24/7 !

 

 

Last Wednesday 7/19, SA7BXU - Torbjorn, became the 31st member to complete the 24/7 Endorsement. Please join me in congratulating him on this outstanding achievement.  24/7 requires completing a QSO in each of the 168 hour blocks making up the week.  It takes dedication, perseverance, and missing a lot of sleep!

 

Well done Torbjorn!  And welcome to the Branch with all the other 30 Hoot Owls!  We were each crazy to do it, but it was a Hoot!

 

Rick - N7WE

070 - #1602


Re: Another new 24/7 !

Paula K7PAX #1739
 

Welcome to the branch of the night-owl tree! Well Done!

 

K7PAX – Paula - #1739

 

From: 070@... [mailto:070@...]
Sent: Monday, July 24, 2017 7:19 AM
To: 070@...
Subject: [070] Another new 24/7 !

 

 

Last Wednesday 7/19, SA7BXU - Torbjorn, became the 31st member to complete the 24/7 Endorsement. Please join me in congratulating him on this outstanding achievement.  24/7 requires completing a QSO in each of the 168 hour blocks making up the week.  It takes dedication, perseverance, and missing a lot of sleep!

 

Well done Torbjorn!  And welcome to the Branch with all the other 30 Hoot Owls!  We were each crazy to do it, but it was a Hoot!

 

Rick - N7WE

070 - #1602


Another new 24/7 !

Rick - N7WE
 

Last Wednesday 7/19, SA7BXU - Torbjorn, became the 31st member to complete the 24/7 Endorsement. Please join me in congratulating him on this outstanding achievement.  24/7 requires completing a QSO in each of the 168 hour blocks making up the week.  It takes dedication, perseverance, and missing a lot of sleep!


Well done Torbjorn!  And welcome to the Branch with all the other 30 Hoot Owls!  We were each crazy to do it, but it was a Hoot!


Rick - N7WE

070 - #1602


Re: Cobweb Antenna

declan lennon
 

Used 2 of them in napel in march work great just be carful how you are buying off one guy that's builds them in Poland is very poor on delivery he says 4 weeks but I know of a few people that had to wait 5 to 8 months for it to get the their door 

Declan ei9hq/9n7ei 

Sent from my iPhone

On Jul 24, 2017, at 12:57, Christopher J LaRue NO7E no7e@... [070] <070@...> wrote:

 

Hi Steve,

I have a friend here in Las Vegas that is using one due to antenna restrictions and he loves it.  He works mostly JT65 and other digital modes, he has a cap over his MIC connection on his IC-7300 lol I guess he is afraid to talk.  His is only mounted at 12 feet so the HOA can not see it and he works the world on it, he had to make some adjustments with it so make sure you have an analyzer when you set it up but once set up it is great.

-
73 de Chris NO7E
no7e@...

On 7/23/17 9:33 AM, Jerry n9avy@... [070] wrote:
 
Got a bunch of cobwebs in basement  if you're looking for parts 

Jerry n9avy

From: "Steve P oldjavadrinker@... [070]" <070@...>
To: "070@..." <070@...>
Sent: Sunday, July 23, 2017 11:30 AM
Subject: [070] Cobweb Antenna

 
Anyone used or is using the 5 band Cobweb? I'm looking at going that route for a few reasons...price...lightweight...reviews seem pretty good.

Wondering if anyone in group has any thoughts on this critter?

Steve
2301

Sent from my iPhone



-


Re: Cobweb Antenna

Chris J LaRue NO7E
 

Hi Steve,

I have a friend here in Las Vegas that is using one due to antenna restrictions and he loves it.  He works mostly JT65 and other digital modes, he has a cap over his MIC connection on his IC-7300 lol I guess he is afraid to talk.  His is only mounted at 12 feet so the HOA can not see it and he works the world on it, he had to make some adjustments with it so make sure you have an analyzer when you set it up but once set up it is great.

- 
73 de Chris NO7E
no7e@...

On 7/23/17 9:33 AM, Jerry n9avy@... [070] wrote:
 
Got a bunch of cobwebs in basement  if you're looking for parts 

Jerry n9avy

From: "Steve P oldjavadrinker@... [070]" <070@...>
To: "070@..." <070@...>
Sent: Sunday, July 23, 2017 11:30 AM
Subject: [070] Cobweb Antenna

 
Anyone used or is using the 5 band Cobweb? I'm looking at going that route for a few reasons...price...lightweight...reviews seem pretty good.

Wondering if anyone in group has any thoughts on this critter?

Steve
2301

Sent from my iPhone



-


30M CQ

Randy True
 

Calling now


Randy W4RTT



Spots - Suriname, Belgium, Haiti

Rick - N7WE
 

PZ5RA CQing on 14.070 + about 1200 at 22:52 UTC.  Strong into central Florida.

OT9Z CQing on 14.070 + about 750 at 22:52 UTC.  Strong into central Florida.

4V1TL CQing on 14.070 + about 1600 at 22:54 UTC.  Strong into central Florida.


Rick - N7WE

070 - #1602

15821 - 15840 of 67711