Date   

Re: PODXS Net???

ki4vmk@...
 

Sounds good to me

KI4VMK


Re: Something funny with Eqsl

Masaaaki Maeda
 

Thanks!
I am considering when we received one signal. If it is "QSO before", the log in the FLdigi indicate something.
Is there any such function inside?

Masa

------------------------------------------

Masaaki Maeda

 

Strategic Advisor

Asurion, LLC

1400 Fashion Island Blvd. Suite 700

San Mateo, CA 94404

Office: +1-650-581-2786

Mobile: +1-917-593-3954

Email: masa.maeda@...

------------------------------------------

 


2017/07/21 2:37、Jerry n9avy@... [070] <070@...> のメッセージ:

 

Unfortunately, yes.  However I much prefer it to HRD and other software.  It was at the time cheaper than HRD, but it doesn't all the features/modes that HRD has.
 
Jerry  N9AVY
 



From: "Masaaaki Maeda maeda622@... [070]" <070@...>
To: 070@...
Sent: Thursday, July 20, 2017 11:30 PM
Subject: Re: [070] Re: Something funny with Eqsl

 
Thanks!
It is charged program, right?

Masa

------------------------------------------
Masaaki Maeda
 
Strategic Advisor
Asurion, LLC
------------------------------------------
 

2017/07/21 0:05、Jerry n9avy@... [070] <070@...> のメッセージ:

 
Masa:
 
MixW  will do that almost automatically  and if programmed correctly it will insert it in your macro.  Some folks are amazed at my memory , hah !  


Jerry  N9AVY

From: "Masaaaki Maeda maeda622@... [070]" <070@...>
To: 070@...
Sent: Thursday, July 20, 2017 10:11 PM
Subject: Re: [070] Re: Something funny with Eqsl

 
Dave,
All,

In FLdigi, can I found out easily "QSO before" or "first time QSO" by mouse/pointed?

Masa

------------------------------------------
Masaaki Maeda
 
Strategic Advisor
Asurion, LLC
------------------------------------------
 

2017/07/18 22:40、David Hardy davehardy0101@... [070] <070@...> のメッセージ:

 
Yep.  Got a batch of dups today, too.  One of my buddies says he can't get Fldigi to log to EQsl now, either.  

David Hardy   1692/381
KB3RAN
 





Re: Something funny with Eqsl

Jerry N9AVY
 

Unfortunately, yes.  However I much prefer it to HRD and other software.  It was at the time cheaper than HRD, but it doesn't all the features/modes that HRD has.
 
Jerry  N9AVY
 



From: "Masaaaki Maeda maeda622@... [070]" <070@...>
To: 070@...
Sent: Thursday, July 20, 2017 11:30 PM
Subject: Re: [070] Re: Something funny with Eqsl

 
Thanks!
It is charged program, right?

Masa

------------------------------------------
Masaaki Maeda
 
Strategic Advisor
Asurion, LLC
------------------------------------------
 

2017/07/21 0:05、Jerry n9avy@... [070] <070@...> のメッセージ:

 
Masa:
 
MixW  will do that almost automatically  and if programmed correctly it will insert it in your macro.  Some folks are amazed at my memory , hah !  


Jerry  N9AVY

From: "Masaaaki Maeda maeda622@... [070]" <070@...>
To: 070@...
Sent: Thursday, July 20, 2017 10:11 PM
Subject: Re: [070] Re: Something funny with Eqsl

 
Dave,
All,

In FLdigi, can I found out easily "QSO before" or "first time QSO" by mouse/pointed?

Masa

------------------------------------------
Masaaki Maeda
 
Strategic Advisor
Asurion, LLC
------------------------------------------
 

2017/07/18 22:40、David Hardy davehardy0101@... [070] <070@...> のメッセージ:

 
Yep.  Got a batch of dups today, too.  One of my buddies says he can't get Fldigi to log to EQsl now, either.  

David Hardy   1692/381
KB3RAN
 





Re: Something funny with Eqsl

Masaaaki Maeda
 

Thanks!
It is charged program, right?

Masa

------------------------------------------

Masaaki Maeda

 

Strategic Advisor

Asurion, LLC

1400 Fashion Island Blvd. Suite 700

San Mateo, CA 94404

Office: +1-650-581-2786

Mobile: +1-917-593-3954

Email: masa.maeda@...

------------------------------------------

 


2017/07/21 0:05、Jerry n9avy@... [070] <070@...> のメッセージ:

 

Masa:
 
MixW  will do that almost automatically  and if programmed correctly it will insert it in your macro.  Some folks are amazed at my memory , hah !  


Jerry  N9AVY

From: "Masaaaki Maeda maeda622@... [070]" <070@...>
To: 070@...
Sent: Thursday, July 20, 2017 10:11 PM
Subject: Re: [070] Re: Something funny with Eqsl

 
Dave,
All,

In FLdigi, can I found out easily "QSO before" or "first time QSO" by mouse/pointed?

Masa

------------------------------------------
Masaaki Maeda
 
Strategic Advisor
Asurion, LLC
------------------------------------------
 

2017/07/18 22:40、David Hardy davehardy0101@... [070] <070@...> のメッセージ:

 
Yep.  Got a batch of dups today, too.  One of my buddies says he can't get Fldigi to log to EQsl now, either.  

David Hardy   1692/381
KB3RAN
 



Re: Something funny with Eqsl

Jerry N9AVY
 

Masa:
 
MixW  will do that almost automatically  and if programmed correctly it will insert it in your macro.  Some folks are amazed at my memory , hah !  


Jerry  N9AVY


From: "Masaaaki Maeda maeda622@... [070]" <070@...>
To: 070@...
Sent: Thursday, July 20, 2017 10:11 PM
Subject: Re: [070] Re: Something funny with Eqsl

 
Dave,
All,

In FLdigi, can I found out easily "QSO before" or "first time QSO" by mouse/pointed?

Masa

------------------------------------------
Masaaki Maeda
 
Strategic Advisor
Asurion, LLC
------------------------------------------
 

2017/07/18 22:40、David Hardy davehardy0101@... [070] <070@...> のメッセージ:

 
Yep.  Got a batch of dups today, too.  One of my buddies says he can't get Fldigi to log to EQsl now, either.  

David Hardy   1692/381
KB3RAN
 



DM76

Jerry N9AVY
 

K5K at Philmont Boy Scout Ranch in Cimarron NM   .  Look like he'll be on for JOTA  this weekend/
 
Found him on 20 around 0300 or so.  Tried to contact him, but no joy.
 
Jerry  n9avy


Re: 30m

boat.anchor@...
 

Tipped the vertical toward Jerry and worked two stations. 
I think they were both short path but maybe an echo in there as sounded like Jerry on both.
G'nite to all
Barry


Re: Something funny with Eqsl

Masaaaki Maeda
 

Dave,
All,

In FLdigi, can I found out easily "QSO before" or "first time QSO" by mouse/pointed?

Masa

------------------------------------------

Masaaki Maeda

 

Strategic Advisor

Asurion, LLC

1400 Fashion Island Blvd. Suite 700

San Mateo, CA 94404

Office: +1-650-581-2786

Mobile: +1-917-593-3954

Email: masa.maeda@...

------------------------------------------

 


2017/07/18 22:40、David Hardy davehardy0101@... [070] <070@...> のメッセージ:

 

Yep.  Got a batch of dups today, too.  One of my buddies says he can't get Fldigi to log to EQsl now, either.  

David Hardy   1692/381
KB3RAN
 


Re: 30m

Jim K5SP
 

Thanks Barry, got you and both of Jerry's calls.  Was rough copy on you but made it into the log....

73

Jim, K5SP



From: "boat.anchor@... [070]" <070@...>
To: 070@...
Sent: Thursday, July 20, 2017 9:18 PM
Subject: Re: [070] 30m

 
K5SP Jim is in the log  TU
Barry




Re: 30m

Jerry N9AVY
 

My pleasure .


jerry


From: "Otets Richard rickocr2005@... [070]" <070@...>
To: "Jerry n9avy@... [070]" <070@...>
Sent: Thursday, July 20, 2017 9:10 PM
Subject: Re: [070] 30m

 
Thanks Jerry for the 2 contacts on 30!!


Fr Richard




On Thursday, July 20, 2017, 10:07:10 PM EDT, Jerry n9avy@... [070] <070@...> wrote:


 

Got on 30m late tonight.  Managed to work a couple stations.    Also running K9ATI , club station,  and gave out wrong 070 #   as 1806  when it's actually 1808   1808.  Please correct your logs.   Sorry , not running on all cylinders tonight.  Long day at work.
 
Jerry n9avy  #454
 
k9ati  #1808



Re: 30m

boat.anchor@...
 

K5SP Jim is in the log  TU
Barry


Re: 30m

boat.anchor@...
 

Trying 30M but all quiet
VB7150


Re: 30m

Fr Richard R
 

Thanks Jerry for the 2 contacts on 30!!


Fr Richard




On Thursday, July 20, 2017, 10:07:10 PM EDT, Jerry n9avy@... [070] <070@...> wrote:


 


Got on 30m late tonight.  Managed to work a couple stations.    Also running K9ATI , club station,  and gave out wrong 070 #   as 1806  when it's actually 1808   1808.  Please correct your logs.   Sorry , not running on all cylinders tonight.  Long day at work.
 
Jerry n9avy  #454
 
k9ati  #1808


30m

Jerry N9AVY
 


Got on 30m late tonight.  Managed to work a couple stations.    Also running K9ATI , club station,  and gave out wrong 070 #   as 1806  when it's actually 1808   1808.  Please correct your logs.   Sorry , not running on all cylinders tonight.  Long day at work.
 
Jerry n9avy  #454
 
k9ati  #1808


Re: 30M

Bill Garwood
 

I'm on 30 now.  See Propnet but no stations.  10.140 + 1500


Bill N4GBK FM16 NC


From: 070@... <070@...> on behalf of randy true w4rttrandy@... [070] <070@...>
Sent: Thursday, July 20, 2017 11:40:14 PM
To: 070@...
Subject: [070] 30M
 
 

Need 3 more for 30/30.


Randy W4RTT



Re: Today's Funny Story

Jerry N9AVY
 

... and if you want to work /mm  stations put antenna is a barrel of water !
 



From: "Mike Besemer mwbesemer@... [070]" <070@...>
To: 070@...
Sent: Thursday, July 20, 2017 7:21 PM
Subject: Re: [070] Today's Funny Story

 
No, no.  If you want to work across the equater, you turn it upside down.  If you want to work the opposite hemisphere, you turn it sideways.

Mike
WM4B
#348
On Jul 20, 2017 4:23 PM, "'ljl2002@...' joe_molon@... [070]" <070@...> wrote:
 
Barry,

I asked him.  I had made several contacts there in the weeks before including him (VK3BM).  The mornings we talked with his beam oriented toward Europe and I also was able to work Reunion Island at the same time. Later on he said that he swung it around and came across the Pacific. I googled his QTH and immediately understood why we had the QSO.  The beam antenna on his tower was bigger than his house.

I was curious as to why I got him both times that is why I asked.   I did the same thing with a station near Adeleide too.

When the prop is in, it is in even for qrp stations.  Sure do miss those days though.  Haven't had contact with the Aussie's in quite a while now.

Jerry I tried to rotate the vertical but nothing changed???????  Maybe I should mount it upside down but then I would have to operate prq. Ya had to go there didn't ya.

73
Joe
KA1PPV  #1482




On Thursday, July 20, 2017 3:32 PM, "Jerry n9avy@... [070]" <070@...> wrote:


 
Rotate the vertical, of course !
 
Jerry  N9AVY



From: "boat.anchor@... [070]" <070@...>
To: 070@...
Sent: Thursday, July 20, 2017 12:57 PM
Subject: Re: [070] Today's Funny Story

 
Joe

When using a vertical how do you determine if your contact is long path or short path.

TVM
Barry



---In 070@..., wrote :

Steve,

Great catch!  I've seen him at my QTH but no joy here.

I was blown away when I reached Australia on long path.  I was on 20m using a vertical on the roof with 1.5 watts.
As you said, "when it's in it's in!  Ya gotta love this mode!

73  GDX!!
Joe
KA1PPV  #1482
altVirus-free. www.avast.com







Re: Today's Funny Story

Jerry N9AVY
 

Sure !
 



From: "randy true w4rttrandy@... [070]" <070@...>
To: "070@..." <070@...>
Sent: Thursday, July 20, 2017 7:09 PM
Subject: Re: [070] Today's Funny Story

 
So, you could put your vertical on a tilt base and have a directional vertical?

Randy W4RTT



From: 070@... <070@...> on behalf of Jerry n9avy@... [070] <070@...>
Sent: Thursday, July 20, 2017 5:21 PM
To: 070@...
Subject: Re: [070] Today's Funny Story
 
 
Joe:
 
The "trick" with vertical is to count them a few degrees from true vertical  and that'll give  you a different directional pattern.
 
Found this tidbit in the Ham Radio Operators Guide to Old wives Tales and Other Myths .
 
jerry  N9AVY



From: "'ljl2002@...' joe_molon@... [070]" <070@...>
To: "070@..." <070@...>
Sent: Thursday, July 20, 2017 3:53 PM
Subject: Re: [070] Today's Funny Story

 
Barry,

I asked him.  I had made several contacts there in the weeks before including him (VK3BM).  The mornings we talked with his beam oriented toward Europe and I also was able to work Reunion Island at the same time. Later on he said that he swung it around and came across the Pacific. I googled his QTH and immediately understood why we had the QSO.  The beam antenna on his tower was bigger than his house.

I was curious as to why I got him both times that is why I asked.   I did the same thing with a station near Adeleide too.

When the prop is in, it is in even for qrp stations.  Sure do miss those days though.  Haven't had contact with the Aussie's in quite a while now.

Jerry I tried to rotate the vertical but nothing changed???????  Maybe I should mount it upside down but then I would have to operate prq. Ya had to go there didn't ya.

73
Joe
KA1PPV  #1482




On Thursday, July 20, 2017 3:32 PM, "Jerry n9avy@... [070]" <070@...> wrote:


 
Rotate the vertical, of course !
 
Jerry  N9AVY



From: "boat.anchor@... [070]" <070@...>
To: 070@...
Sent: Thursday, July 20, 2017 12:57 PM
Subject: Re: [070] Today's Funny Story

 
Joe

When using a vertical how do you determine if your contact is long path or short path.

TVM
Barry



---In 070@..., wrote :

Steve,

Great catch!  I've seen him at my QTH but no joy here.

I was blown away when I reached Australia on long path.  I was on 20m using a vertical on the roof with 1.5 watts.
As you said, "when it's in it's in!  Ya gotta love this mode!

73  GDX!!
Joe
KA1PPV  #1482
alt Virus-free. www.avast.com









Re: Today's Funny Story

Randy True
 

So, you could put your vertical on a tilt base and have a directional vertical?


Randy W4RTT




From: 070@... <070@...> on behalf of Jerry n9avy@... [070] <070@...>
Sent: Thursday, July 20, 2017 5:21 PM
To: 070@...
Subject: Re: [070] Today's Funny Story
 
 

Joe:
 
The "trick" with vertical is to count them a few degrees from true vertical  and that'll give  you a different directional pattern.
 
Found this tidbit in the Ham Radio Operators Guide to Old wives Tales and Other Myths .
 
jerry  N9AVY



From: "'ljl2002@...' joe_molon@... [070]" <070@...>
To: "070@..." <070@...>
Sent: Thursday, July 20, 2017 3:53 PM
Subject: Re: [070] Today's Funny Story

 
Barry,

I asked him.  I had made several contacts there in the weeks before including him (VK3BM).  The mornings we talked with his beam oriented toward Europe and I also was able to work Reunion Island at the same time. Later on he said that he swung it around and came across the Pacific. I googled his QTH and immediately understood why we had the QSO.  The beam antenna on his tower was bigger than his house.

I was curious as to why I got him both times that is why I asked.   I did the same thing with a station near Adeleide too.

When the prop is in, it is in even for qrp stations.  Sure do miss those days though.  Haven't had contact with the Aussie's in quite a while now.

Jerry I tried to rotate the vertical but nothing changed???????  Maybe I should mount it upside down but then I would have to operate prq. Ya had to go there didn't ya.

73
Joe
KA1PPV  #1482




On Thursday, July 20, 2017 3:32 PM, "Jerry n9avy@... [070]" <070@...> wrote:


 
Rotate the vertical, of course !
 
Jerry  N9AVY



From: "boat.anchor@... [070]" <070@...>
To: 070@...
Sent: Thursday, July 20, 2017 12:57 PM
Subject: Re: [070] Today's Funny Story

 
Joe

When using a vertical how do you determine if your contact is long path or short path.

TVM
Barry



---In 070@..., wrote :

Steve,

Great catch!  I've seen him at my QTH but no joy here.

I was blown away when I reached Australia on long path.  I was on 20m using a vertical on the roof with 1.5 watts.
As you said, "when it's in it's in!  Ya gotta love this mode!

73  GDX!!
Joe
KA1PPV  #1482
alt Virus-free. www.avast.com







Re: PODXS Net???

Dan Morris - KZ3T
 

Bill - It can run just like the OMISS net runs.  People check it and then when it is your turn you call anyone you want but you are limited to either 1 or 2 calls the first time around to keep it short and sweet.  And using Net Logger is an excellent tool.

I have also checked in to a 40m net which meets every 2nd Monday of the month.

Dan Morris  KZ3T





On Jul 20, 2017, at 7:40 PM, Bill Garwood n4gbk@... [070] <070@...> wrote:


I have seen other nets on PSK31.  Might be something to do on some kind of rotating schedule on 20 and 40 meters.  My first question would be what is the purpose of this net?  If it is to allow a person to work as many different 070 members as possible, then only short contest like contacts should be encouraged.  Want to ragchew?  Then make a call and move to a different frequency from the net freq.   Would you encourage guests to participate, such as folks trying to join the club?  Needs to be thought out a bit but could work.  Maybe move to 30 meters once a month for those working on the 30-30 award etc.  I don’t think this would violate the gentlemen’s agreement for no contests on WARC bands.   Does not need to be in the middle of the regular PSK31 operations.  Maybe 14.072 and up or similar. 

 

Happy Radio!

 

Bill N4GBK #1688

 

Sent from Mail for Windows 10

 

From: Jerry n9avy@... [070]
Sent: Thursday, July 20, 2017 7:07 PM
To: 070@...
Subject: Re: [070] PODXS Net???

 

 

There is a net on the low end of 20m. Heard it a couple times.  From what I've heard, it sounds a bit like organized  chaos.  Heard people trying to hold frequency when some started calling CQ on "their frequency" or propagation shifted and others on net couldn't any longer.

 

Used to operate a few nets on 10m and then it took a net control ( NC) with a lot of patience and skill. 10-10 nets are sometimes run with assistant NC operators in different areas of country. Propagation lately might make nets very difficult. With many undisciplined PSK  operator these days,  running a net would be challenging at best. 

 

My dos centavos worth ..

 

Jerry  N9AVY

 

<187069C157674EB39D0F757A34A7D4F7.png>

From: "David Rock david@... [070]" <070@...>
To: 070@... 
Sent: Thursday, July 20, 2017 5:50 PM
Subject: Re: [070] PODXS Net???

 

 


> On Jul 20, 2017, at 17:41, 'Marty Grove' martygrove@... [070] <070@...> wrote:
> 
> 
> So… we have something like 2000+ members in PODXS now… what do you all think about getting some kind of informal net started? 

That brings up an interesting question I’ve had for a while.. how do you run a net over PSK31? Is it workable?

 
David, K9DWR
#1604 LONP #255
david@...

 

 


<56FBA3A9CCD741B59FCCEE1FBB56BEB7.png>


Re: PODXS Net???

Dan Morris - KZ3T
 

I think a PODXS net would be awesome and possibly Net Logger would be a good program to use as it keeps track of everything.  If anyone is a OMISS member, you will probably be familiar with that program.

Dan Morris  KZ3T





On Jul 20, 2017, at 6:41 PM, 'Marty Grove' martygrove@... [070] <070@...> wrote:


So… we have something like 2000+ members in PODXS now… what do you all think about getting some kind of informal net started?  

 

It would be nice to start getting all of you in my log.  

 

??

 

Marty – KJ4LQX 



13541 - 13560 of 65325