|
Re: PODXS Net???
ki4vmk@...
Sounds good to me
KI4VMK
|
||
|
|
||
|
Re: Something funny with Eqsl
Masaaaki Maeda
Thanks! I am considering when we received one signal. If it is "QSO before", the log in the FLdigi indicate something. Is there any such function inside? Masa ------------------------------------------ Masaaki Maeda
Strategic Advisor Asurion, LLC 1400 Fashion Island Blvd. Suite 700 Office: +1-650-581-2786 Mobile: +1-917-593-3954 Email: masa.maeda@... ------------------------------------------
|
||
|
|
||
|
Re: Something funny with Eqsl
Unfortunately, yes. However I much prefer it to HRD and other software. It was at the time cheaper than HRD, but it doesn't all the features/modes that HRD has. Jerry N9AVY
From: "Masaaaki Maeda maeda622@... [070]" <070@...> To: 070@... Sent: Thursday, July 20, 2017 11:30 PM Subject: Re: [070] Re: Something funny with Eqsl Thanks! It is charged program, right? Masa ------------------------------------------ Masaaki Maeda Strategic Advisor Asurion, LLC 1400 Fashion Island Blvd. Suite 700 Office: +1-650-581-2786 Mobile: +1-917-593-3954 Email: masa.maeda@... ------------------------------------------
|
||
|
|
||
|
Re: Something funny with Eqsl
Masaaaki Maeda
Thanks! It is charged program, right? Masa ------------------------------------------ Masaaki Maeda
Strategic Advisor Asurion, LLC 1400 Fashion Island Blvd. Suite 700 Office: +1-650-581-2786 Mobile: +1-917-593-3954 Email: masa.maeda@... ------------------------------------------
|
||
|
|
||
|
Re: Something funny with Eqsl
Masa: MixW will do that almost automatically and if programmed correctly it will insert it in your macro. Some folks are amazed at my memory , hah !  Jerry N9AVY
From: "Masaaaki Maeda maeda622@... [070]" <070@...> To: 070@... Sent: Thursday, July 20, 2017 10:11 PM Subject: Re: [070] Re: Something funny with Eqsl Dave, All, In FLdigi, can I found out easily "QSO before" or "first time QSO" by mouse/pointed? Masa ------------------------------------------ Masaaki Maeda Strategic Advisor Asurion, LLC 1400 Fashion Island Blvd. Suite 700 Office: +1-650-581-2786 Mobile: +1-917-593-3954 Email: masa.maeda@... ------------------------------------------
|
||
|
|
||
|
DM76
K5K at Philmont Boy Scout Ranch in Cimarron NM . Look like he'll be on for JOTA this weekend/ Found him on 20 around 0300 or so. Tried to contact him, but no joy. Jerry n9avy
|
||
|
|
||
|
Re: 30m
boat.anchor@...
Tipped the vertical toward Jerry and worked two stations.
I think they were both short path but maybe an echo in there as sounded like Jerry on both. G'nite to all Barry
|
||
|
|
||
|
Re: Something funny with Eqsl
Masaaaki Maeda
Dave, All, In FLdigi, can I found out easily "QSO before" or "first time QSO" by mouse/pointed? Masa ------------------------------------------ Masaaki Maeda
Strategic Advisor Asurion, LLC 1400 Fashion Island Blvd. Suite 700 Office: +1-650-581-2786 Mobile: +1-917-593-3954 Email: masa.maeda@... ------------------------------------------
|
||
|
|
||
|
Re: 30m
Thanks Barry, got you and both of Jerry's calls. Was rough copy on you but made it into the log.... 73 Jim, K5SP
From: "boat.anchor@... [070]" <070@...> To: 070@... Sent: Thursday, July 20, 2017 9:18 PM Subject: Re: [070] 30m K5SP Jim is in the log TU Barry
|
||
|
|
||
|
Re: 30m
My pleasure . jerry
From: "Otets Richard rickocr2005@... [070]" <070@...> To: "Jerry n9avy@... [070]" <070@...> Sent: Thursday, July 20, 2017 9:10 PM Subject: Re: [070] 30m Thanks Jerry for the 2 contacts on 30!! Fr Richard On Thursday, July 20, 2017, 10:07:10 PM EDT, Jerry n9avy@... [070] <070@...> wrote: Got on 30m late tonight. Managed to work a couple stations. Also running K9ATI , club station, and gave out wrong 070 # as 1806 when it's actually 1808 1808. Please correct your logs. Sorry , not running on all cylinders tonight. Long day at work. Jerry n9avy #454 k9ati #1808
|
||
|
|
||
|
Re: 30m
boat.anchor@...
K5SP Jim is in the log TU
Barry
|
||
|
|
||
|
Re: 30m
boat.anchor@...
Trying 30M but all quiet
VB7150
|
||
|
|
||
|
Re: 30m
Thanks Jerry for the 2 contacts on 30!! Fr Richard
On Thursday, July 20, 2017, 10:07:10 PM EDT, Jerry n9avy@... [070] <070@...> wrote: Got on 30m late tonight. Managed to work a couple stations. Also running K9ATI , club station, and gave out wrong 070 # as 1806 when it's actually 1808 1808. Please correct your logs. Sorry , not running on all cylinders tonight. Long day at work. Jerry n9avy #454 k9ati #1808
|
||
|
|
||
|
30m
Got on 30m late tonight. Managed to work a couple stations. Also running K9ATI , club station, and gave out wrong 070 # as 1806 when it's actually 1808 1808. Please correct your logs. Sorry , not running on all cylinders tonight. Long day at work. Jerry n9avy #454 k9ati #1808
|
||
|
|
||
|
Re: 30M
Bill Garwood
I'm on 30 now. See Propnet but no stations. 10.140 + 1500
Bill N4GBK FM16 NC
From: 070@... <070@...> on behalf of randy true w4rttrandy@... [070] <070@...>
Sent: Thursday, July 20, 2017 11:40:14 PM To: 070@... Subject: [070] 30M Need 3 more for 30/30.
Randy W4RTT
|
||
|
|
||
|
Re: Today's Funny Story
... and if you want to work /mm stations put antenna is a barrel of water !
From: "Mike Besemer mwbesemer@... [070]" <070@...> To: 070@... Sent: Thursday, July 20, 2017 7:21 PM Subject: Re: [070] Today's Funny Story No, no. If you want to work across the equater, you turn it upside down. If you want to work the opposite hemisphere, you turn it sideways. Mike WM4B #348 On Jul 20, 2017 4:23 PM, "'ljl2002@...' joe_molon@... [070]" <070@...> wrote:
|
||
|
|
||
|
Re: Today's Funny Story
Sure !
From: "randy true w4rttrandy@... [070]" <070@...> To: "070@..." <070@...> Sent: Thursday, July 20, 2017 7:09 PM Subject: Re: [070] Today's Funny Story So, you could put your vertical on a tilt base and have a directional vertical?
Randy W4RTT
From: 070@... <070@...> on behalf of Jerry n9avy@... [070] <070@...>
Sent: Thursday, July 20, 2017 5:21 PM To: 070@... Subject: Re: [070] Today's Funny Story Joe:
The "trick" with vertical is to count them a few degrees from true vertical and that'll give you a different directional pattern.
Found this tidbit in the Ham Radio Operators Guide to Old wives Tales and Other Myths .
jerry N9AVY
From: "'ljl2002@...' joe_molon@... [070]" <070@...> To: "070@..." <070@...> Sent: Thursday, July 20, 2017 3:53 PM Subject: Re: [070] Today's Funny Story Barry,
I asked him. I had made several contacts there in the weeks before including him (VK3BM). The mornings we talked with his beam
oriented toward Europe and I also was able to work Reunion Island at the same time. Later on he said that he swung it around and came across the Pacific. I googled his QTH and immediately understood why we had the QSO. The beam antenna on his tower was bigger
than his house.
I was curious as to why I got him both times that is why I asked. I did the same thing with a station near Adeleide too.
When the prop is in, it is in even for qrp stations. Sure do miss those days though. Haven't had contact with the Aussie's in
quite a while now.
Jerry I tried to rotate the vertical but nothing changed??????? Maybe I should mount it upside down but then I would have to
operate prq. Ya had to go there didn't ya.
73
Joe
KA1PPV #1482
On Thursday, July 20, 2017 3:32 PM, "Jerry n9avy@... [070]" <070@...> wrote:
Rotate the vertical, of course !
Jerry N9AVY
From: "boat.anchor@... [070]" <070@...> To: 070@... Sent: Thursday, July 20, 2017 12:57 PM Subject: Re: [070] Today's Funny Story Joe
When using a vertical how do you determine if your contact is long path or short path.
TVM
Barry
---In 070@..., wrote : Steve,
Great catch! I've seen him at my QTH but no joy here.
I was blown away when I reached Australia on long path. I was on 20m using a vertical on the roof with 1.5 watts.
As you said, "when it's in it's in! Ya gotta love this mode!
73 GDX!!
Joe
KA1PPV #1482
|
||
|
|
||
|
Re: Today's Funny Story
So, you could put your vertical on a tilt base and have a directional vertical?
Randy W4RTT
From: 070@... <070@...> on behalf of Jerry n9avy@... [070] <070@...>
Sent: Thursday, July 20, 2017 5:21 PM To: 070@... Subject: Re: [070] Today's Funny Story Joe:
The "trick" with vertical is to count them a few degrees from true vertical and that'll give you a different directional pattern.
Found this tidbit in the Ham Radio Operators Guide to Old wives Tales and Other Myths .
jerry N9AVY
From: "'ljl2002@...' joe_molon@... [070]" <070@...> To: "070@..." <070@...> Sent: Thursday, July 20, 2017 3:53 PM Subject: Re: [070] Today's Funny Story Barry,
I asked him. I had made several contacts there in the weeks before including him (VK3BM). The mornings we talked with his beam
oriented toward Europe and I also was able to work Reunion Island at the same time. Later on he said that he swung it around and came across the Pacific. I googled his QTH and immediately understood why we had the QSO. The beam antenna on his tower was bigger
than his house.
I was curious as to why I got him both times that is why I asked. I did the same thing with a station near Adeleide too.
When the prop is in, it is in even for qrp stations. Sure do miss those days though. Haven't had contact with the Aussie's in
quite a while now.
Jerry I tried to rotate the vertical but nothing changed??????? Maybe I should mount it upside down but then I would have to
operate prq. Ya had to go there didn't ya.
73
Joe
KA1PPV #1482
On Thursday, July 20, 2017 3:32 PM, "Jerry n9avy@... [070]" <070@...> wrote:
Rotate the vertical, of course !
Jerry N9AVY
From: "boat.anchor@... [070]" <070@...> To: 070@... Sent: Thursday, July 20, 2017 12:57 PM Subject: Re: [070] Today's Funny Story Joe
When using a vertical how do you determine if your contact is long path or short path.
TVM
Barry
---In 070@..., wrote : Steve,
Great catch! I've seen him at my QTH but no joy here.
I was blown away when I reached Australia on long path. I was on 20m using a vertical on the roof with 1.5 watts.
As you said, "when it's in it's in! Ya gotta love this mode!
73 GDX!!
Joe
KA1PPV #1482
|
||
|
|
||
|
Re: PODXS Net???
Bill - It can run just like the OMISS net runs. People check it and then when it is your turn you call anyone you want but you are limited to either 1 or 2 calls the first time around to keep it short and sweet. And using Net Logger is an excellent tool.
toggle quoted messageShow quoted text
I have also checked in to a 40m net which meets every 2nd Monday of the month.
|
||
|
|
||
|
Re: PODXS Net???
I think a PODXS net would be awesome and possibly Net Logger would be a good program to use as it keeps track of everything. If anyone is a OMISS member, you will probably be familiar with that program.
toggle quoted messageShow quoted text
|
||
|
|
