Date   

Re: Grids

Rick - N7WE
 

Mike -
Thanks, but drat!  I only need EM71 and EM81 to finish GA.  Let me know if you start thinking road trip!

Jerry - 
I worked Gary K4GZ PSK31 on 7/7/2016 about 14:20 UTC on 20m for EM91bt.  I don't find him on the 070 member list, but his QTH was Ludowici, GA.  Only EM91 I've ever worked on any mode.  Might try to look him up.  One other thing...I was /P from Glacier National Park, MT.  YPMV.  (Your propagation might vary.)

Rick - N7WE
070 - #1602


Re: Grids

Jerry N9AVY
 

Nah !   Need  EM91   and can't find anyone to finish off GA..
 
Jerry N9AVY



From: "'Mike Besemer' mwbesemer@... [070]" <070@...>
To: 070@...
Sent: Sunday, July 16, 2017 1:18 PM
Subject: RE: [070] RE: Grids

 
On the off-chance anyone needs EM82 in middle Georgia, give me a shout.  There are several hams here who work PSK, but I’m here (with a lousy antenna) if anyone needs me.
 
Mike
WM4B
#348
 
 
 
From: 070@... [mailto:070@...]
Sent: Sunday, July 16, 2017 2:13 PM
To: 070@...
Subject: Re: [070] RE: Grids
 
 
Just a word of caution ...
 
Keep in mind that this is a QRZ product  and many, many listings have wrong grid tied to call sign. Don't believe it when you see a station in OR  with a grid  for TX .
 
Just sayin' 
 
Jerry  N9AVY
 

From: "n7we1980@... [070]" <070@...>
To: 070@...
Sent: Sunday, July 16, 2017 8:01 AM
Subject: [070] RE: Grids
 
 
Here's a link to a grid square locator that I find very handy.  You can search by call, grid square (4 or 6 digit),  or address, city and state, or zip code.  Pops up a map showing the location with a very handy zoom in, zoom out feature.  
 
 
Rick - N7WE
070 - #1602
 
 



Re: Grids

Mike Besemer <mwbesemer@...>
 

On the off-chance anyone needs EM82 in middle Georgia, give me a shout.  There are several hams here who work PSK, but I’m here (with a lousy antenna) if anyone needs me.

 

Mike

WM4B

#348

 

 

 

From: 070@... [mailto:070@...]
Sent: Sunday, July 16, 2017 2:13 PM
To: 070@...
Subject: Re: [070] RE: Grids

 

 

Just a word of caution ...

 

Keep in mind that this is a QRZ product  and many, many listings have wrong grid tied to call sign. Don't believe it when you see a station in OR  with a grid  for TX .

 

Just sayin' 

 

Jerry  N9AVY

 


From: "n7we1980@... [070]" <070@...>
To: 070@...
Sent: Sunday, July 16, 2017 8:01 AM
Subject: [070] RE: Grids

 

 

Here's a link to a grid square locator that I find very handy.  You can search by call, grid square (4 or 6 digit),  or address, city and state, or zip code.  Pops up a map showing the location with a very handy zoom in, zoom out feature.  

 

 

Rick - N7WE

070 - #1602

 

 


Re: Grids

Jerry N9AVY
 

Just a word of caution ...
 
Keep in mind that this is a QRZ product  and many, many listings have wrong grid tied to call sign. Don't believe it when you see a station in OR  with a grid  for TX .
 
Just sayin' 
 
Jerry  N9AVY



From: "n7we1980@... [070]" <070@...>
To: 070@...
Sent: Sunday, July 16, 2017 8:01 AM
Subject: [070] RE: Grids

 
Here's a link to a grid square locator that I find very handy.  You can search by call, grid square (4 or 6 digit),  or address, city and state, or zip code.  Pops up a map showing the location with a very handy zoom in, zoom out feature.  


Rick - N7WE
070 - #1602




Re: Grids

ljl2002@att.net
 

Rick,

I've used this program to locate /P's when they don't announce their grid during the QSO.
Very helpful.

Joe
KA1PPV  #1482


On Sunday, July 16, 2017 9:06 AM, "n7we1980@... [070]" <070@...> wrote:


 
Here's a link to a grid square locator that I find very handy.  You can search by call, grid square (4 or 6 digit),  or address, city and state, or zip code.  Pops up a map showing the location with a very handy zoom in, zoom out feature.  


Rick - N7WE
070 - #1602




Re: Grids

ljl2002@att.net
 

Jerry,

If your freezer was in Antarctica all you would have had to do is wait and a giant piece the size of Delaware would have broken off.
That would have shortened your wait time.

Joe
KA1PPV  #1482


On Saturday, July 15, 2017 10:21 PM, "n7we1980@... [070]" <070@...> wrote:


 
Bryon-

I still need DM 39, DM47, and DM 48 in UT.  Are you planning some portable activations?  I hope, hope, hope!

Rick - N7WE
070 - #1602



Re: [Fwd: [ARLHS] Point Prim]

ljl2002@att.net
 

Steve,
I saw VY2PLH on 20m but couldn't get through so I decided to check later on 40m just in case, and he was there.  According to his web page it was only activated for one day.
Interesting history for the LH.

Got lucky this time.

Joe
KA1PPV  #1482


On Saturday, July 15, 2017 7:44 PM, "w3hf@... [070]" <070@...> wrote:


 
Bernie VE9BGC is operating VY2PLH on 20m  now (2340z)
 about 14071.5 or so

Steve
W3HF



Re: Grids

Rick - N7WE
 

Here's a link to a grid square locator that I find very handy.  You can search by call, grid square (4 or 6 digit),  or address, city and state, or zip code.  Pops up a map showing the location with a very handy zoom in, zoom out feature.  


Rick - N7WE
070 - #1602


Re: Grids

Jerry N9AVY
 

Just did a bit of research on QRZ ...

The only Wisconsin grid I need is EN65 and there are seemingly 9 page of hams in EN65  or so it would seem.
 
Scanning through the 9 pages I found hams using EN65  who had addresses in CO, KY, IA, TX and MN (Minneapolis).
 
It would appear that EN65 is also in MI as well as WI.  The most often seen towns are: Marinette, Menominee, Peshtigo, Crivitz and a bunch of smaller towns.  So, if one is seriously  hunting for this grid , those 4 towns would be likely targets.  
 
One can use the "look up grid " feature on QRZ to find other towns & grids.  Some probably already know this, but others may not.
 
 
Jerry  N9AVY


Re: Grids

Rick - N7WE
 

Bryon-

I still need DM 39, DM47, and DM 48 in UT.  Are you planning some portable activations?  I hope, hope, hope!

Rick - N7WE
070 - #1602


Re: Grids

Jerry N9AVY
 

DM58, DM48, DM47,DM39, DM38  AND THEY ARE PROBABLY ALL DESERT AND OTHER UNOCCUPIED LANDS... MAYBE GOV'T LAND WHERE NO ONE IS ALLOWED.
 
Oops, excuse the caps , left caps lock on.
 
 
Jerry   n9avy


From: "Bryon nnegrom@... [070]" <070@...>
To: 070@...
Sent: Saturday, July 15, 2017 6:45 PM
Subject: Re: [070] Re: Grids

 
Jerry, 

What grids in Utah do you need?

Bryon, W7RIV

On Sat, Jul 15, 2017 at 5:31 PM w3hf@... [070] <070@...> wrote:
 
Jerry -

I'm the same way. I have a paper with all the 070 members I need, and another one with all the (US) grids I need.

Steve
W3HF



Re: Grids

Steve W3HF
 

Bryon -

You asked Jerry (not me), but I'll answer too.

DM38, DM39, and DM47.

Steve
W3HF


Re: Grids

W7RIV
 

Jerry, 

What grids in Utah do you need?

Bryon, W7RIV


On Sat, Jul 15, 2017 at 5:31 PM w3hf@... [070] <070@...> wrote:
 

Jerry -


I'm the same way. I have a paper with all the 070 members I need, and another one with all the (US) grids I need.

Steve
W3HF


Re: [Fwd: [ARLHS] Point Prim]

Steve W3HF
 

Bernie VE9BGC is operating VY2PLH on 20m  now (2340z)
 about 14071.5 or so

Steve
W3HF


Re: Grids

Steve W3HF
 

Jerry -

I'm the same way. I have a paper with all the 070 members I need, and another one with all the (US) grids I need.

Steve
W3HF


Grids

Jerry N9AVY
 

Still kind of old-fashioned type and I like to see lists for things I'm chasing.  So, using Excel I made a list of all the grids I still need .. about 140 or so.  This way I can see at a glance what grids I need while operating. There's probably a way to do it on computer, but I like seeing stuff right in front of my eyes without having to bounce back and forth on computer screens.  Anyhow, this is what works for me.
 
The old list was terribly out of date because I was lax on checking grids off when I worked them. Don't expect to work many more or ever finish endorsement. I don't usually rely on QRZ or even the station for correct grid. QRZ is terribly inaccurate...  don't believe everything you read on QRZ !
It was fun making up list while I was waiting for freezer in garage to defrost ... it looked like Antarctica inside !  Took a couple hours, but it's done for another year.  Which reminds me that all to soon it will be "antenna maintenance"  time.  Check all those connections for loose wires/bolts , ground connections, cracks/holes in coax and all the other stuff no one wants to go out in cold or in middle of contest to fix. 
 
 
Jerry  N9AVY


30M

Randy True
 

30 is showing some prop from Cinciy to West coast. Get up and try it!


Randy W4RTT



Re: Membership package

Matthew King <mrk.twg@...>
 

Hey, good deal, Marty.

Donations are what makes the club go 'round, and we're about to undertake our endorsement mailing, so we'd sure appreciate any donations from anybody. Stamps are getting any cheaper, that's for sure!

Thanks, y'all....

73

Matt King
AK4MK - 070 #1708
PODXS 070 Club Executive Director


On Fri, Jul 14, 2017 at 4:35 PM, Marty martygrove@... [070] <070@...> wrote:
 

I did too!  Thanks PODXS folks. 

I'm going right now to send you all a couple donation bucks to help pay for the other new members coming in to PODXS.

Marty - KJ4LQX


On 07/14/2017 03:54 PM, Charles Odom ki4vmk@... [070] wrote:
 
My membership package came in the mail today, nice real nice thanks to all involved.
Charles
KI4VMK # 2542



Re: Membership package

Marty Grove
 

I did too!  Thanks PODXS folks. 

I'm going right now to send you all a couple donation bucks to help pay for the other new members coming in to PODXS.

Marty - KJ4LQX


On 07/14/2017 03:54 PM, Charles Odom ki4vmk@... [070] wrote:
 
My membership package came in the mail today, nice real nice thanks to all involved.
Charles
KI4VMK # 2542


Re: Membership package

Matthew King <mrk.twg@...>
 

Glad you got it, Charles - welcome to the club!

73

Matt King
AK4MK - 070 #1708
PODXS 070 Club Executive Director


On Fri, Jul 14, 2017 at 3:54 PM, Charles Odom ki4vmk@... [070] <070@...> wrote:
 

My membership package came in the mail today, nice real nice thanks to all involved.
Charles
KI4VMK # 2542


16301 - 16320 of 67892