Date   

Re: Funny

Jerry N9AVY
 

Yes, you saw it too !

Jerry  n9avy



From: "'John Etling' john@... [070]" <070@...>
To: 070@...
Sent: Monday, August 31, 2015 9:31 AM
Subject: RE: [070] Funny

 
Was that the one crying about macros making Kitties cry??? If so saw that as well. Then read his QRZ bio and man is he so far off the beaten path it is ridiculous.
 
… I’m just sayin’
 
73 de K3JAE
John Etling
070 #1820   LONP #321
PODXS 070 – Nobody Special – Just a Member
 
 
 
 
 


From: Jerry n9avy@... [070] [mailto:070@...]
Sent: Monday, August 31, 2015 09:26
To: 070 PSK Club
Subject: [070] Funny
 
 
There is some funny stuff when you stop to read some QSOs.  Just saw an undisclosed station ripping on another about macros .. obviously , he doesn't think highly of macros and told the other station he has more marcos if he likes macros.  The other stations sent his usual macro  and replied that he has 43 more if he'd like to see them all !   Ha-ha !!!
 
Jerry n9avy



Re: Funny

John Etling
 

Was that the one crying about macros making Kitties cry??? If so saw that as well. Then read his QRZ bio and man is he so far off the beaten path it is ridiculous.

 

… I’m just sayin’

 

73 de K3JAE

John Etling

k3jae@...

070 #1820   LONP #321

PODXS 070 – Nobody Special – Just a Member

 

 

 

 

 

From: Jerry n9avy@... [070] [mailto:070@...]
Sent: Monday, August 31, 2015 09:26
To: 070 PSK Club
Subject: [070] Funny

 

 

There is some funny stuff when you stop to read some QSOs.  Just saw an undisclosed station ripping on another about macros .. obviously , he doesn't think highly of macros and told the other station he has more marcos if he likes macros.  The other stations sent his usual macro  and replied that he has 43 more if he'd like to see them all !   Ha-ha !!!

 

Jerry n9avy


Funny

Jerry N9AVY
 

There is some funny stuff when you stop to read some QSOs.  Just saw an undisclosed station ripping on another about macros .. obviously , he doesn't think highly of macros and told the other station he has more marcos if he likes macros.  The other stations sent his usual macro  and replied that he has 43 more if he'd like to see them all !   Ha-ha !!!

Jerry n9avy


Re: Anyone around this morning

Jerry N9AVY
 

Band just opened a bit ... worked Paul, NU4C (solid 599),  and saw a station in NM, but many signals were weak with lots of QSB.

Things may be better ...

Jerry  N9AVY



From: "'John Etling' john@... [070]" <070@...>
To: 070@...
Sent: Monday, August 31, 2015 8:29 AM
Subject: RE: [070] Anyone around this morning

 
I announced a few then must have scared them off as now I have a pretty blank waterfall on 20, 40. Sorry... didn’t mean to scare ‘em away
… I’m just sayin’
 
73 de K3JAE
John Etling
070 #1820   LONP #321
PODXS 070 – Nobody Special – Just a Member
 
 
 
 


From: Jerry n9avy@... [070] [mailto:070@...]
Sent: Monday, August 31, 2015 08:24
To: 070@...
Subject: Re: [070] Anyone around this morning
 
 
Totally dead here in Northern Illinois. 40, 20 and so on.  Nada , zip...
 
jerry  n9avy
 

From: "'John Etling' john@... [070]" <070@...>
To: 070@...
Sent: Monday, August 31, 2015 8:09 AM
Subject: RE: [070] Anyone around this morning
 
 
Worked a few on 40m this morning about an hour ago – KF9KV (070-0934) is currently working on 40m as well right now.
Also REUNION ISLAND (F5MFV) currently working on 20m – but a little weak here in Tennessee.
 
… I’m just sayin’
 
73 de K3JAE
John Etling
070 #1820   LONP #321
PODXS 070 – Nobody Special – Just a Member
 
 
 
 
 
From: Dan Morris dbmorris315@... [070] [mailto:070@...]
Sent: Monday, August 31, 2015 06:13
To: 070 List Service 070 List Service
Subject: [070] Anyone around this morning
 
 
Well, thought I would try and catch someone on the radio this morning but no go so far. I’ve gone between 20,40 & 80 .. Still trying on 40 right now.

Dan Morris KZ3T 070-1065
dbmorris315@...
 



Re: Anyone around this morning

John Etling
 

I announced a few then must have scared them off as now I have a pretty blank waterfall on 20, 40. Sorry... didn’t mean to scare ‘em away

… I’m just sayin’

 

73 de K3JAE

John Etling

k3jae@...

070 #1820   LONP #321

PODXS 070 – Nobody Special – Just a Member

 

 

 

 

From: Jerry n9avy@... [070] [mailto:070@...]
Sent: Monday, August 31, 2015 08:24
To: 070@...
Subject: Re: [070] Anyone around this morning

 

 

Totally dead here in Northern Illinois. 40, 20 and so on.  Nada , zip...

 

jerry  n9avy

 


From: "'John Etling' john@... [070]" <070@...>
To: 070@...
Sent: Monday, August 31, 2015 8:09 AM
Subject: RE: [070] Anyone around this morning

 

 

Worked a few on 40m this morning about an hour ago – KF9KV (070-0934) is currently working on 40m as well right now.

Also REUNION ISLAND (F5MFV) currently working on 20m – but a little weak here in Tennessee.

 

… I’m just sayin’

 

73 de K3JAE

John Etling

070 #1820   LONP #321

PODXS 070 – Nobody Special – Just a Member

 

 

 

 

 

From: Dan Morris dbmorris315@... [070] [mailto:070@...]
Sent: Monday, August 31, 2015 06:13
To: 070 List Service 070 List Service
Subject: [070] Anyone around this morning

 

 

Well, thought I would try and catch someone on the radio this morning but no go so far. I’ve gone between 20,40 & 80 .. Still trying on 40 right now.

Dan Morris KZ3T 070-1065
dbmorris315@...

 


Re: Anyone around this morning

stan W9SMR
 

C31MF (Manel) Andorra calling CQ 20m (2,100Hz)
 
73,
Stan
W9SMR/9
 

To: 070@...
From: 070@...
Date: Mon, 31 Aug 2015 08:09:55 -0500
Subject: RE: [070] Anyone around this morning



Worked a few on 40m this morning about an hour ago – KF9KV (070-0934) is currently working on 40m as well right now.

Also REUNION ISLAND (F5MFV) currently working on 20m – but a little weak here in Tennessee.

 

… I’m just sayin’

 

73 de K3JAE

John Etling

k3jae@...

070 #1820   LONP #321

PODXS 070 – Nobody Special – Just a Member

 

 

 

 

 

From: Dan Morris dbmorris315@... [070] [mailto:070@...]
Sent: Monday, August 31, 2015 06:13
To: 070 List Service 070 List Service
Subject: [070] Anyone around this morning

 

 

Well, thought I would try and catch someone on the radio this morning but no go so far. I’ve gone between 20,40 & 80 .. Still trying on 40 right now.

Dan Morris KZ3T 070-1065
dbmorris315@...




Re: Anyone around this morning

Jerry N9AVY
 

Totally dead here in Northern Illinois. 40, 20 and so on.  Nada , zip...

jerry  n9avy



From: "'John Etling' john@... [070]" <070@...>
To: 070@...
Sent: Monday, August 31, 2015 8:09 AM
Subject: RE: [070] Anyone around this morning

 
Worked a few on 40m this morning about an hour ago – KF9KV (070-0934) is currently working on 40m as well right now.
Also REUNION ISLAND (F5MFV) currently working on 20m – but a little weak here in Tennessee.
 
… I’m just sayin’
 
73 de K3JAE
John Etling
070 #1820   LONP #321
PODXS 070 – Nobody Special – Just a Member
 
 
 
 
 
From: Dan Morris dbmorris315@... [070] [mailto:070@...]
Sent: Monday, August 31, 2015 06:13
To: 070 List Service 070 List Service
Subject: [070] Anyone around this morning
 
 
Well, thought I would try and catch someone on the radio this morning but no go so far. I’ve gone between 20,40 & 80 .. Still trying on 40 right now.

Dan Morris KZ3T 070-1065
dbmorris315@...



Re: Anyone around this morning

John Etling
 

Worked a few on 40m this morning about an hour ago – KF9KV (070-0934) is currently working on 40m as well right now.

Also REUNION ISLAND (F5MFV) currently working on 20m – but a little weak here in Tennessee.

 

… I’m just sayin’

 

73 de K3JAE

John Etling

k3jae@...

070 #1820   LONP #321

PODXS 070 – Nobody Special – Just a Member

 

 

 

 

 

From: Dan Morris dbmorris315@... [070] [mailto:070@...]
Sent: Monday, August 31, 2015 06:13
To: 070 List Service 070 List Service
Subject: [070] Anyone around this morning

 

 

Well, thought I would try and catch someone on the radio this morning but no go so far. I’ve gone between 20,40 & 80 .. Still trying on 40 right now.

Dan Morris KZ3T 070-1065
dbmorris315@...


Anyone around this morning

Dan Morris - KZ3T
 

Well, thought I would try and catch someone on the radio this morning but no go so far. I’ve gone between 20,40 & 80 .. Still trying on 40 right now.

Dan Morris KZ3T 070-1065
dbmorris315@gmail.com


Re: King of Endorsement Checker

W7RIV
 

Thank you very much. This would have been inserted via JT-65HF.

Bryon W7RIV

On Sun, Aug 30, 2015 at 6:33 PM, David Westbrook dwestbrook@... [070] <070@...> wrote:
 


Got it!  Your QSO for    NR5O JT65 20150821   has some bad characters (null, ascii=0) in the Name, QSLMsg, Comment fields which were causing a premature end to the processing of the file...  Not sure how those would have gotten into DXK  (via JTAlert??).    I've updated my processing script to strip them, so it's all good now!  (i refreshed your log, too, using the fix)

Thanks for reporting that!

73!
--david
KJ4IZW



On Sun, Aug 30, 2015 at 5:04 PM, Bryon nnegrom@... [070] <070@...> wrote:
 

Done. Just uploaded it as my full export.

On Sun, Aug 30, 2015 at 12:20 PM, David Westbrook dwestbrook@... [070] <070@...> wrote:
 

No problem -- easiest way is just upload it normally and drop me an email.

On Aug 30, 2015 2:05 PM, "Bryon nnegrom@... [070]" <070@...> wrote:
 

Would you mind if I sent you. File and had you look at it?


Bryon W7RIV

On Sunday, August 30, 2015, David Westbrook dwestbrook@... [070] <070@...> wrote:
 

Looks ok to me now ... and i see the timestamp on it is "W7RIV - 03:34:26 30-Aug-2015 - Trophy Case" ..
I can only guess (since i don't keep copies of the uploaded logs; and my bad for not looking earlier) that the earlier log had an issue -- maybe didn't fully upload, or wrong file was uploaded, or something like that.

73!
--david
KJ4IZW


On Sun, Aug 30, 2015 at 12:09 PM, Bryon nnegrom@... [070] <070@...> wrote:
 

I haven't head back. I tried some things. One thing I did was export only PSK31 contacts and that worked.  Not sure why it would stop. Information from Sir David would still be appreciated.

Thanks,
Bryon W7RIV

On Thu, Aug 27, 2015 at 11:54 AM, Matthew King - KK4CPS mrk.twg@... [070] <070@...> wrote:
 

Hmmm.... I have to defer to David on this one. A cursory look at your ADIF data didn't reveal anything crazy.

Though I could have stared straight at something and just not seen it.......... :-P


73


Matt King

KK4CPS

kk4cps@...

070 #1708 LONP #261

PODXS 070 Club Executive Director



On Thu, Aug 27, 2015 at 1:45 PM, Bryon nnegrom@... [070] <070@...> wrote:
 

David or group...can someone give me some feedback? I think something is wrong. I'm not doing anything different, but I'm not getting endorsements to show up as in progress, completed, etc. 

This wasn't the case until just the last week.

Thanks,
Bryon W7RIV








Re: King of Endorsement Checker

David Westbrook
 


Got it!  Your QSO for    NR5O JT65 20150821   has some bad characters (null, ascii=0) in the Name, QSLMsg, Comment fields which were causing a premature end to the processing of the file...  Not sure how those would have gotten into DXK  (via JTAlert??).    I've updated my processing script to strip them, so it's all good now!  (i refreshed your log, too, using the fix)

Thanks for reporting that!

73!
--david
KJ4IZW



On Sun, Aug 30, 2015 at 5:04 PM, Bryon nnegrom@... [070] <070@...> wrote:
 

Done. Just uploaded it as my full export.

On Sun, Aug 30, 2015 at 12:20 PM, David Westbrook dwestbrook@... [070] <070@...> wrote:
 

No problem -- easiest way is just upload it normally and drop me an email.

On Aug 30, 2015 2:05 PM, "Bryon nnegrom@... [070]" <070@...> wrote:
 

Would you mind if I sent you. File and had you look at it?


Bryon W7RIV

On Sunday, August 30, 2015, David Westbrook dwestbrook@... [070] <070@...> wrote:
 

Looks ok to me now ... and i see the timestamp on it is "W7RIV - 03:34:26 30-Aug-2015 - Trophy Case" ..
I can only guess (since i don't keep copies of the uploaded logs; and my bad for not looking earlier) that the earlier log had an issue -- maybe didn't fully upload, or wrong file was uploaded, or something like that.

73!
--david
KJ4IZW


On Sun, Aug 30, 2015 at 12:09 PM, Bryon nnegrom@... [070] <070@...> wrote:
 

I haven't head back. I tried some things. One thing I did was export only PSK31 contacts and that worked.  Not sure why it would stop. Information from Sir David would still be appreciated.

Thanks,
Bryon W7RIV

On Thu, Aug 27, 2015 at 11:54 AM, Matthew King - KK4CPS mrk.twg@... [070] <070@...> wrote:
 

Hmmm.... I have to defer to David on this one. A cursory look at your ADIF data didn't reveal anything crazy.

Though I could have stared straight at something and just not seen it.......... :-P


73


Matt King

KK4CPS

kk4cps@...

070 #1708 LONP #261

PODXS 070 Club Executive Director



On Thu, Aug 27, 2015 at 1:45 PM, Bryon nnegrom@... [070] <070@...> wrote:
 

David or group...can someone give me some feedback? I think something is wrong. I'm not doing anything different, but I'm not getting endorsements to show up as in progress, completed, etc. 

This wasn't the case until just the last week.

Thanks,
Bryon W7RIV







Re: Milt's 80 meter workout

Robert Johnstone
 

After going through the 3.7GiggaWatt Flux Capacitor, it's all good. kd0fip 1396 I need more sleep.



From: "Jerry n9avy@... [070]" <070@...>
To: "070@..." <070@...>
Sent: Sunday, August 30, 2015 4:11 PM
Subject: Re: [070] Milt's 80 meter workout

 
If Milt has 100 ft of RG-8  the  LMR 400 has better line loss figure. 




From: "Robert Johnstone shopr3@... [070]" <070@...>
To: "070@..." <070@...>
Sent: Sunday, August 30, 2015 4:04 PM
Subject: Re: [070] Milt's 80 meter workout

 
before dumping the coax you might put a big watt 50 ohm dummy load on the antenna end and check it with an analyser.  We have an acft simulator repair tech who has a fancy meter he can adjust by the inch to look  at any point on the line for defects.  I am betting Ca has all kinds of wiz kids with fancy meters HI hI GL and you can reply direct to set up a sched except tonight and monday. kd0fip @arrl.net




From: "'Milton Garb' n6mg@... [070]" <070@...>
To: 070@...
Sent: Sunday, August 30, 2015 8:14 AM
Subject: RE: [070] Milt's 80 meter workout

 
Robert,
I saw nothing!
Nada!
N’yet!
El Zippo Grande`!
Before 80m season hits us, I’m going to do some very basic things here.
Such as? Change the feed line and phasing coax to my 80m 4-square, clean up all the connections, get a local tech on my payroll to align and massage my 80m rig, an Icom 756 Pro 3, and basically check out the simple and obvious things.
I’ve got a 500’ roll of LMR-400 that I’m dying to put into service. Maybe it’s time to use a 100’ piece to replace what’s currently in use?
Still scratchin’ and looking, and not happy that I can’t do much before the 80m Sprint next week.
Milt.
N6MG
070-650
LONP #76
 


From: 070@... [mailto:070@...]
Sent: Saturday, August 29, 2015 10:22 PM
To: 070 PSK Club <070@...>
Subject: [070] Milt's 80 meter workout
 
 
Did you get your 80 meter workout?  I see 3 traces here but they arent real strong. kd0fip 1396







Re: Milt's 80 meter workout

Jerry N9AVY
 

If Milt has 100 ft of RG-8  the  LMR 400 has better line loss figure. 



From: "Robert Johnstone shopr3@... [070]" <070@...>
To: "070@..." <070@...>
Sent: Sunday, August 30, 2015 4:04 PM
Subject: Re: [070] Milt's 80 meter workout

 
before dumping the coax you might put a big watt 50 ohm dummy load on the antenna end and check it with an analyser.  We have an acft simulator repair tech who has a fancy meter he can adjust by the inch to look  at any point on the line for defects.  I am betting Ca has all kinds of wiz kids with fancy meters HI hI GL and you can reply direct to set up a sched except tonight and monday. kd0fip @arrl.net




From: "'Milton Garb' n6mg@... [070]" <070@...>
To: 070@...
Sent: Sunday, August 30, 2015 8:14 AM
Subject: RE: [070] Milt's 80 meter workout

 
Robert,
I saw nothing!
Nada!
N’yet!
El Zippo Grande`!
Before 80m season hits us, I’m going to do some very basic things here.
Such as? Change the feed line and phasing coax to my 80m 4-square, clean up all the connections, get a local tech on my payroll to align and massage my 80m rig, an Icom 756 Pro 3, and basically check out the simple and obvious things.
I’ve got a 500’ roll of LMR-400 that I’m dying to put into service. Maybe it’s time to use a 100’ piece to replace what’s currently in use?
Still scratchin’ and looking, and not happy that I can’t do much before the 80m Sprint next week.
Milt.
N6MG
070-650
LONP #76
 


From: 070@... [mailto:070@...]
Sent: Saturday, August 29, 2015 10:22 PM
To: 070 PSK Club <070@...>
Subject: [070] Milt's 80 meter workout
 
 
Did you get your 80 meter workout?  I see 3 traces here but they arent real strong. kd0fip 1396





Re: Milt's 80 meter workout

Robert Johnstone
 

before dumping the coax you might put a big watt 50 ohm dummy load on the antenna end and check it with an analyser.  We have an acft simulator repair tech who has a fancy meter he can adjust by the inch to look  at any point on the line for defects.  I am betting Ca has all kinds of wiz kids with fancy meters HI hI GL and you can reply direct to set up a sched except tonight and monday. kd0fip @arrl.net



From: "'Milton Garb' n6mg@... [070]" <070@...>
To: 070@...
Sent: Sunday, August 30, 2015 8:14 AM
Subject: RE: [070] Milt's 80 meter workout

 
Robert,
I saw nothing!
Nada!
N’yet!
El Zippo Grande`!
Before 80m season hits us, I’m going to do some very basic things here.
Such as? Change the feed line and phasing coax to my 80m 4-square, clean up all the connections, get a local tech on my payroll to align and massage my 80m rig, an Icom 756 Pro 3, and basically check out the simple and obvious things.
I’ve got a 500’ roll of LMR-400 that I’m dying to put into service. Maybe it’s time to use a 100’ piece to replace what’s currently in use?
Still scratchin’ and looking, and not happy that I can’t do much before the 80m Sprint next week.
Milt.
N6MG
070-650
LONP #76
 


From: 070@... [mailto:070@...]
Sent: Saturday, August 29, 2015 10:22 PM
To: 070 PSK Club <070@...>
Subject: [070] Milt's 80 meter workout
 
 
Did you get your 80 meter workout?  I see 3 traces here but they arent real strong. kd0fip 1396



Re: King of Endorsement Checker

W7RIV
 

Done. Just uploaded it as my full export.

On Sun, Aug 30, 2015 at 12:20 PM, David Westbrook dwestbrook@... [070] <070@...> wrote:
 

No problem -- easiest way is just upload it normally and drop me an email.

On Aug 30, 2015 2:05 PM, "Bryon nnegrom@... [070]" <070@...> wrote:
 

Would you mind if I sent you. File and had you look at it?


Bryon W7RIV

On Sunday, August 30, 2015, David Westbrook dwestbrook@... [070] <070@...> wrote:
 

Looks ok to me now ... and i see the timestamp on it is "W7RIV - 03:34:26 30-Aug-2015 - Trophy Case" ..
I can only guess (since i don't keep copies of the uploaded logs; and my bad for not looking earlier) that the earlier log had an issue -- maybe didn't fully upload, or wrong file was uploaded, or something like that.

73!
--david
KJ4IZW


On Sun, Aug 30, 2015 at 12:09 PM, Bryon nnegrom@... [070] <070@...> wrote:
 

I haven't head back. I tried some things. One thing I did was export only PSK31 contacts and that worked.  Not sure why it would stop. Information from Sir David would still be appreciated.

Thanks,
Bryon W7RIV

On Thu, Aug 27, 2015 at 11:54 AM, Matthew King - KK4CPS mrk.twg@... [070] <070@...> wrote:
 

Hmmm.... I have to defer to David on this one. A cursory look at your ADIF data didn't reveal anything crazy.

Though I could have stared straight at something and just not seen it.......... :-P


73


Matt King

KK4CPS

kk4cps@...

070 #1708 LONP #261

PODXS 070 Club Executive Director



On Thu, Aug 27, 2015 at 1:45 PM, Bryon nnegrom@... [070] <070@...> wrote:
 

David or group...can someone give me some feedback? I think something is wrong. I'm not doing anything different, but I'm not getting endorsements to show up as in progress, completed, etc. 

This wasn't the case until just the last week.

Thanks,
Bryon W7RIV






Re: King of Endorsement Checker

David Westbrook
 

No problem -- easiest way is just upload it normally and drop me an email.

On Aug 30, 2015 2:05 PM, "Bryon nnegrom@... [070]" <070@...> wrote:
 

Would you mind if I sent you. File and had you look at it?


Bryon W7RIV

On Sunday, August 30, 2015, David Westbrook dwestbrook@... [070] <070@...> wrote:
 

Looks ok to me now ... and i see the timestamp on it is "W7RIV - 03:34:26 30-Aug-2015 - Trophy Case" ..
I can only guess (since i don't keep copies of the uploaded logs; and my bad for not looking earlier) that the earlier log had an issue -- maybe didn't fully upload, or wrong file was uploaded, or something like that.

73!
--david
KJ4IZW


On Sun, Aug 30, 2015 at 12:09 PM, Bryon nnegrom@... [070] <070@...> wrote:
 

I haven't head back. I tried some things. One thing I did was export only PSK31 contacts and that worked.  Not sure why it would stop. Information from Sir David would still be appreciated.

Thanks,
Bryon W7RIV

On Thu, Aug 27, 2015 at 11:54 AM, Matthew King - KK4CPS mrk.twg@... [070] <070@...> wrote:
 

Hmmm.... I have to defer to David on this one. A cursory look at your ADIF data didn't reveal anything crazy.

Though I could have stared straight at something and just not seen it.......... :-P


73


Matt King

KK4CPS

kk4cps@...

070 #1708 LONP #261

PODXS 070 Club Executive Director



On Thu, Aug 27, 2015 at 1:45 PM, Bryon nnegrom@... [070] <070@...> wrote:
 

David or group...can someone give me some feedback? I think something is wrong. I'm not doing anything different, but I'm not getting endorsements to show up as in progress, completed, etc. 

This wasn't the case until just the last week.

Thanks,
Bryon W7RIV





Re: King of Endorsement Checker

W7RIV
 

Would you mind if I sent you. File and had you look at it?

Bryon W7RIV


On Sunday, August 30, 2015, David Westbrook dwestbrook@... [070] <070@...> wrote:
 

Looks ok to me now ... and i see the timestamp on it is "W7RIV - 03:34:26 30-Aug-2015 - Trophy Case" ..
I can only guess (since i don't keep copies of the uploaded logs; and my bad for not looking earlier) that the earlier log had an issue -- maybe didn't fully upload, or wrong file was uploaded, or something like that.

73!
--david
KJ4IZW


On Sun, Aug 30, 2015 at 12:09 PM, Bryon nnegrom@... [070] <070@...> wrote:
 

I haven't head back. I tried some things. One thing I did was export only PSK31 contacts and that worked.  Not sure why it would stop. Information from Sir David would still be appreciated.

Thanks,
Bryon W7RIV

On Thu, Aug 27, 2015 at 11:54 AM, Matthew King - KK4CPS mrk.twg@... [070] <070@...> wrote:
 

Hmmm.... I have to defer to David on this one. A cursory look at your ADIF data didn't reveal anything crazy.

Though I could have stared straight at something and just not seen it.......... :-P


73


Matt King

070 #1708 LONP #261

PODXS 070 Club Executive Director



On Thu, Aug 27, 2015 at 1:45 PM, Bryon nnegrom@... [070] <070@...> wrote:
 

David or group...can someone give me some feedback? I think something is wrong. I'm not doing anything different, but I'm not getting endorsements to show up as in progress, completed, etc. 

This wasn't the case until just the last week.

Thanks,
Bryon W7RIV





Re: CONTEST UPDATE

Jerry N9AVY
 

The whir from the spinning electric meter would probably make your neighbors think a UFO was landing !  :-)

Plus the radiation hazard would render neighbors sterile .

Jerry  N9AVY



From: "'ljl2002@...' joe_molon@... [070]" <070@...>
To: "070@..." <070@...>
Sent: Sunday, August 30, 2015 12:54 PM
Subject: Re: Re: [070] CONTEST UPDATE

 
I'll end up burnin off the tops of my neighbors cultured trees.
That would not end well I assure you.

Joe
KA1PPV  #1482



On Sunday, August 30, 2015 1:49 PM, "Jerry n9avy@... [070]" <070@...> wrote:


 
Nah, that's still Qrp on 20m !   Think of it like you'll be the first and last station heard on 20m.  You can create your own propagation !

On the downside ,  your electric meter will spin like crazy !   :-)

Jerry  N9AVY


From: "'ljl2002@...' joe_molon@... [070]" <070@...>
To: "070@..." <070@...>
Sent: Sunday, August 30, 2015 12:45 PM
Subject: Re: Re: [070] CONTEST UPDATE

 
I think that an ERP of 2 megawatts would be a bit of overkill don't you?
Joe
KA1PPV  #1482



On Sunday, August 30, 2015 10:39 AM, "Jerry n9avy@... [070]" <070@...> wrote:


 
Joe:

You need to build an amp using one of those BIG tubes from TV station ... then you can be a really big signal !   :-)

Jerry  N9AVY


From: "'ljl2002@...' joe_molon@... [070]" <070@...>
To: "070@..." <070@...>
Sent: Sunday, August 30, 2015 6:44 AM
Subject: Re: Re: [070] CONTEST UPDATE

 
Hear Hear.

I'm still using a SWL PSK-20 kit as Steve can attest to.! LOL! I started using it in 2002 and I have had loads of fun trying to do more with less.
This mode never ceases to amaze me with what it can do using only 1.5 W.(3.5W on 40m)
73
Joe
KA1PPV  #1482



On Saturday, August 29, 2015 2:35 PM, "David Rock david@... [070]" <070@...> wrote:


 
* Stephen Melachrinos w3hf@... [070] <070@...> [2015-08-29 11:03]:
> This may set a record for longest delay in a reflector thread, since you
> are replying to a message from 27 April 2001.

Gotta love resurrecting threads from the dead :-)

> The early members may remember that my first PSK experiences were with a
> Small Wonder Labs PSK-20: only 20m, 3 watts output, crystal controlled. (A

That was my first HF rig as well. My first contact was using a wire
dipole laying on the ground in the back yard. The SWL-20 is a great
rig.

--
David, K9DWR
#1604 LONP #255
david@...













Re: CONTEST UPDATE

ljl2002@att.net
 

I'll end up burnin off the tops of my neighbors cultured trees.
That would not end well I assure you.

Joe
KA1PPV  #1482



On Sunday, August 30, 2015 1:49 PM, "Jerry n9avy@... [070]" <070@...> wrote:


 
Nah, that's still Qrp on 20m !   Think of it like you'll be the first and last station heard on 20m.  You can create your own propagation !

On the downside ,  your electric meter will spin like crazy !   :-)

Jerry  N9AVY


From: "'ljl2002@...' joe_molon@... [070]" <070@...>
To: "070@..." <070@...>
Sent: Sunday, August 30, 2015 12:45 PM
Subject: Re: Re: [070] CONTEST UPDATE

 
I think that an ERP of 2 megawatts would be a bit of overkill don't you?
Joe
KA1PPV  #1482



On Sunday, August 30, 2015 10:39 AM, "Jerry n9avy@... [070]" <070@...> wrote:


 
Joe:

You need to build an amp using one of those BIG tubes from TV station ... then you can be a really big signal !   :-)

Jerry  N9AVY


From: "'ljl2002@...' joe_molon@... [070]" <070@...>
To: "070@..." <070@...>
Sent: Sunday, August 30, 2015 6:44 AM
Subject: Re: Re: [070] CONTEST UPDATE

 
Hear Hear.

I'm still using a SWL PSK-20 kit as Steve can attest to.! LOL! I started using it in 2002 and I have had loads of fun trying to do more with less.
This mode never ceases to amaze me with what it can do using only 1.5 W.(3.5W on 40m)
73
Joe
KA1PPV  #1482



On Saturday, August 29, 2015 2:35 PM, "David Rock david@... [070]" <070@...> wrote:


 
* Stephen Melachrinos w3hf@... [070] <070@...> [2015-08-29 11:03]:
> This may set a record for longest delay in a reflector thread, since you
> are replying to a message from 27 April 2001.

Gotta love resurrecting threads from the dead :-)

> The early members may remember that my first PSK experiences were with a
> Small Wonder Labs PSK-20: only 20m, 3 watts output, crystal controlled. (A

That was my first HF rig as well. My first contact was using a wire
dipole laying on the ground in the back yard. The SWL-20 is a great
rig.

--
David, K9DWR
#1604 LONP #255
david@...











Re: CONTEST UPDATE

Jerry N9AVY
 

Nah, that's still Qrp on 20m !   Think of it like you'll be the first and last station heard on 20m.  You can create your own propagation !

On the downside ,  your electric meter will spin like crazy !   :-)

Jerry  N9AVY



From: "'ljl2002@...' joe_molon@... [070]" <070@...>
To: "070@..." <070@...>
Sent: Sunday, August 30, 2015 12:45 PM
Subject: Re: Re: [070] CONTEST UPDATE

 
I think that an ERP of 2 megawatts would be a bit of overkill don't you?
Joe
KA1PPV  #1482



On Sunday, August 30, 2015 10:39 AM, "Jerry n9avy@... [070]" <070@...> wrote:


 
Joe:

You need to build an amp using one of those BIG tubes from TV station ... then you can be a really big signal !   :-)

Jerry  N9AVY


From: "'ljl2002@...' joe_molon@... [070]" <070@...>
To: "070@..." <070@...>
Sent: Sunday, August 30, 2015 6:44 AM
Subject: Re: Re: [070] CONTEST UPDATE

 
Hear Hear.

I'm still using a SWL PSK-20 kit as Steve can attest to.! LOL! I started using it in 2002 and I have had loads of fun trying to do more with less.
This mode never ceases to amaze me with what it can do using only 1.5 W.(3.5W on 40m)
73
Joe
KA1PPV  #1482



On Saturday, August 29, 2015 2:35 PM, "David Rock david@... [070]" <070@...> wrote:


 
* Stephen Melachrinos w3hf@... [070] <070@...> [2015-08-29 11:03]:
> This may set a record for longest delay in a reflector thread, since you
> are replying to a message from 27 April 2001.

Gotta love resurrecting threads from the dead :-)

> The early members may remember that my first PSK experiences were with a
> Small Wonder Labs PSK-20: only 20m, 3 watts output, crystal controlled. (A

That was my first HF rig as well. My first contact was using a wire
dipole laying on the ground in the back yard. The SWL-20 is a great
rig.

--
David, K9DWR
#1604 LONP #255
david@...