Date   

Re: Welcome new member

Karen Russo
 

It’s also a catchy CW call. Kinda long, but easy to copy. Welcome Scott. 73 – Karen W4KRN


Scott,

What a great call. Even I can remember that one.

Welcome aboard and hope to see you in the WF.

Joe
KA1PPV #1482

--- On Thu, 7/5/12, J Budzowski <mailto:jbudzowski%40verizon.net> wrote:

From: J Budzowski <mailto:jbudzowski%40verizon.net>
Subject: [070] Welcome new member
To: mailto:070%40yahoogroups.com
Date: Thursday, July 5, 2012, 11:51 AM



Pse welcome new 070 Club member Scott AA0AA #1550...73 de Jay N3DQU


Re: Welcome new member

ljl2002@att.net
 

Scott,
 
What a great call.  Even I can remember that one.
 
Welcome aboard and hope to see you in the WF.
 
Joe
KA1PPV #1482

--- On Thu, 7/5/12, J Budzowski <jbudzowski@verizon.net> wrote:


From: J Budzowski <jbudzowski@verizon.net>
Subject: [070] Welcome new member
To: 070@yahoogroups.com
Date: Thursday, July 5, 2012, 11:51 AM



 



Pse welcome new 070 Club member Scott AA0AA #1550...73 de Jay N3DQU







[Non-text portions of this message have been removed]


Welcome new member

J Budzowski <jbudzowski@...>
 

Pse welcome new 070 Club member Scott AA0AA #1550...73 de Jay N3DQU


20m - Open to Asia

 

5:32 am here in So Calif, and I have 4 traces on 20m. 3 in China and 1 Ja.
SFI = 163
A Index = 9
K Index = 3

Milt.
N6MG
070-650


Re: 13 Colonies Special Event

Chuck
 

I hope by now you have been able to find more of them. "D" was very hard
to find. I finally found him on ssb on 20M. DX summit helped and the spot
page on the website helped some. I found the ops would change around on
freq and not log it. I ended up just searching 20 ssb for the elusive
ones. The main problem I had was not being able to hear them in Texas.
When they would beam west it went better. Being a bare bones station it
was hard to bust the pileups. I got all I could on psk but as usuall could
only find 5. Most on ssb or cw. Conditions were not favorable at all.
Good luck in your hunting...

Chuck, K5EVR
070 1305

On Wed, Jul 4, 2012 at 6:49 PM, chuck jones <chuck.k5evr@gmail.com> wrote:

I hope by now you have been able to find more of them. "D" was very hard
to find. I finally found him on ssb on 20M. DX summit helped and the spot
page on the website helped some. I found the ops would change around on
freq and not log it. I ended up just searching 20 ssb for the elusive
ones. The main problem I had was not being able to hear them in Texas.
When they would beam west it went better. Being a bare bones station it
was hard to bust the pileups. I got all I could on psk but as usuall could
only find 5. Most on ssb or cw. Conditions were not favorable at all.
Good luck in your hunting...

Chuck, K5EVR
070 1305


Re: 160m

 

Eric,
Shoot me a message when you do it tonight. I'm going to change the orientation my rotatable dipole.
Perhaps part of our problem last night was timing. We were way early.
Milt
N6MG

----- Original Message -----
From: <radio@hollywoodtitle.com>
To: <070@yahoogroups.com>
Sent: Wednesday, July 04, 2012 8:58 AM
Subject: Re: [070] 160m


Thanks for trying Milt. I didn't see you anywhere. I am running a K3 set on DATA. I think this is essentially USB. The waterfall is above the set frequency.

I did hear N5JDT in New Mexico again last night. Actually I was already asleep, but PSK Reporter recorded his call. I did work him two nights ago, so I have my very first 160m contact!

I will be on again tonight....

Thanks again.

Eric

PS; Dan, it took me 8 years to finally string up enough wire to work this band! :)


On Jul 3, 2012, at 7:41 PM, Milton Garb wrote:

Yup.
----- Original Message -----
From: Daniel Severance
To: 070@yahoogroups.com
Sent: Tuesday, July 03, 2012 7:38 PM
Subject: Re: [070] 160m

surprised you don't hear each other - both are USB?
Cheers,
Dan
N6ERD
#558

________________________________
From: Milton Garb <n6mg@verizon.net>
To: 070@yahoogroups.com
Sent: Tuesday, July 3, 2012 7:32 PM
Subject: Re: [070] 160m

ok...I'll listen for you there.
Milt.

----- Original Message -----
From: radio@hollywoodtitle.com
To: 070@yahoogroups.com
Sent: Tuesday, July 03, 2012 7:31 PM
Subject: Re: [070] 160m

Nothing heard . I am going to try 1.838 now...

Sent from my iPhone

On Jul 3, 2012, at 7:21 PM, Daniel Severance <daniel_severance@yahoo.com> wrote:

You guys are likely close enough to work ground wave :)

I had to do QRZ to figure out where you were - didn't know the city.

I've worked many a contest running the bands with friends who are close, doing 160M with the tuner screaming but if you are close you really don't need a proper antenna (and Chuck during the TDW before I got the 80M dipole modified to work as a T-hat).

Will scramble to get all of the antennas fixed when I get back there on the 18th - all of the feedlines are dropped down into my hostas so it shouldn't take long. I have a line running out of my window so I can pull them back in (if I hadn't had a break in I probably would have left them running into the house but now...).

Cheers,
Dan
N6ERD
#558

________________________________
From: Milton Garb <n6mg@verizon.net>
To: 070@yahoogroups.com
Sent: Tuesday, July 3, 2012 7:05 PM
Subject: Re: [070] 160m
W
Gimme as minute.
Milt.
N6MG

----- Original Message -----
From: <radio@hollywoodtitle.com>
To: <070@yahoogroups.com>
Sent: Tuesday, July 03, 2012 7:00 PM
Subject: Re: [070] 160m

Hi Milt,

Thanks for the reply. I am home now and will get on 1.807 now.

73 de Eric, KG6MZS


On Jul 3, 2012, at 4:02 PM, Milton Garb wrote:

Eric,
Can we give it a try?
Tell me when. My rotatable antenna for 160m should be able to make it
from my valley to yours.
1.807 mHz ok with you?
Milt.
N6MG

----- Original Message -----
From: Radio
To: 070@yahoogroups.com
Sent: Tuesday, July 03, 2012 10:23 AM
Subject: [070] 160m

Hello All,

I finally got enough wire in the air to work 160m. Last night I [barely]
made my first contact. This antenna is a limited time offer as it must
come down when the XYL comes home at the end of the month.

Anybody want to set a sked for 160?

73 de Eric, KG6MZS







------------------------------------

Check out the 070 Club website at <http://www.podxs070.com/> for the
latest information on 070 Club activities.



Yahoo! Groups Links


------------------------------------

Check out the 070 Club website at <http://www.podxs070.com/> for the latest information on 070 Club activities.

Yahoo! Groups Links











------------------------------------

Check out the 070 Club website at <http://www.podxs070.com/> for the latest information on 070 Club activities.



Yahoo! Groups Links



Re: 160m

radio@hollywoodtitle.com <radio@...>
 

Thanks for trying Milt. I didn't see you anywhere. I am running a K3 set on DATA. I think this is essentially USB. The waterfall is above the set frequency.

I did hear N5JDT in New Mexico again last night. Actually I was already asleep, but PSK Reporter recorded his call. I did work him two nights ago, so I have my very first 160m contact!

I will be on again tonight....

Thanks again.

Eric

PS; Dan, it took me 8 years to finally string up enough wire to work this band! :)


On Jul 3, 2012, at 7:41 PM, Milton Garb wrote:

Yup.
----- Original Message -----
From: Daniel Severance
To: 070@yahoogroups.com
Sent: Tuesday, July 03, 2012 7:38 PM
Subject: Re: [070] 160m

surprised you don't hear each other - both are USB?
Cheers,
Dan
N6ERD
#558

________________________________
From: Milton Garb <n6mg@verizon.net>
To: 070@yahoogroups.com
Sent: Tuesday, July 3, 2012 7:32 PM
Subject: Re: [070] 160m

ok...I'll listen for you there.
Milt.

----- Original Message -----
From: radio@hollywoodtitle.com
To: 070@yahoogroups.com
Sent: Tuesday, July 03, 2012 7:31 PM
Subject: Re: [070] 160m

Nothing heard . I am going to try 1.838 now...

Sent from my iPhone

On Jul 3, 2012, at 7:21 PM, Daniel Severance <daniel_severance@yahoo.com> wrote:

You guys are likely close enough to work ground wave :)

I had to do QRZ to figure out where you were - didn't know the city.

I've worked many a contest running the bands with friends who are close, doing 160M with the tuner screaming but if you are close you really don't need a proper antenna (and Chuck during the TDW before I got the 80M dipole modified to work as a T-hat).

Will scramble to get all of the antennas fixed when I get back there on the 18th - all of the feedlines are dropped down into my hostas so it shouldn't take long. I have a line running out of my window so I can pull them back in (if I hadn't had a break in I probably would have left them running into the house but now...).

Cheers,
Dan
N6ERD
#558

________________________________
From: Milton Garb <n6mg@verizon.net>
To: 070@yahoogroups.com
Sent: Tuesday, July 3, 2012 7:05 PM
Subject: Re: [070] 160m
W
Gimme as minute.
Milt.
N6MG

----- Original Message -----
From: <radio@hollywoodtitle.com>
To: <070@yahoogroups.com>
Sent: Tuesday, July 03, 2012 7:00 PM
Subject: Re: [070] 160m

Hi Milt,

Thanks for the reply. I am home now and will get on 1.807 now.

73 de Eric, KG6MZS


On Jul 3, 2012, at 4:02 PM, Milton Garb wrote:

Eric,
Can we give it a try?
Tell me when. My rotatable antenna for 160m should be able to make it
from my valley to yours.
1.807 mHz ok with you?
Milt.
N6MG

----- Original Message -----
From: Radio
To: 070@yahoogroups.com
Sent: Tuesday, July 03, 2012 10:23 AM
Subject: [070] 160m

Hello All,

I finally got enough wire in the air to work 160m. Last night I [barely]
made my first contact. This antenna is a limited time offer as it must
come down when the XYL comes home at the end of the month.

Anybody want to set a sked for 160?

73 de Eric, KG6MZS

[Non-text portions of this message have been removed]



[Non-text portions of this message have been removed]



------------------------------------

Check out the 070 Club website at <http://www.podxs070.com/> for the
latest information on 070 Club activities.



Yahoo! Groups Links


------------------------------------

Check out the 070 Club website at <http://www.podxs070.com/> for the latest information on 070 Club activities.

Yahoo! Groups Links

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]







[Non-text portions of this message have been removed]


Re: 13 Colonies Special Event

Eric Dallmann
 

Delaware (E) is on 20-meters right now (14.071 + ~1200 Hz)

Eric/K9VIC


________________________________
From: F.R. Ashley <gdadx2@clearwire.net>
To: 070@yahoogroups.com
Sent: Wednesday, July 4, 2012 8:44 AM
Subject: Re: [070] 13 Colonies Special Event


 
Rob,

Last night I heard all of the stations including the bonus station except for SC. The VA station was running PSK31. He was on 40 meters but I was unable to work him mainly due to poor operating practice of other hams. The deadline has been extended to July 7th.

73 Buddy WB4M
#1545

From: Rob Gibbs
Sent: Wednesday, July 04, 2012 8:31 AM
To: 070@yahoogroups.com
Subject: Re: [070] 13 Colonies Special Event

Still looking for B, I, J, L...can't find them anywhere

Rob
KD8HSV






[Non-text portions of this message have been removed]


Re: WTW progress checking

David Westbrook
 

When you upload, it completely replaces the log that was there before. So
my recommendation is to just always upload your whole PSK log (any non-PSK
qso's will just be ignored, but goes a little faster excluding them).

... and you might be surprised at what the lonp or endorsements reports
find for you :)

--david
KJ4IZW

On Wed, Jul 4, 2012 at 9:06 AM, Dan Morris <dbm72941mo@roadrunner.com>wrote:

David - I'm assuming that if I submit my whole log or any portion of it
that the checking program will catch the dupes that I submitted before,
right??

Dan Morris KZ3T 070# 1065
dbm72941mo@roadrunner.com


On Jul 3, 2012, at 11:09 PM, David Westbrook wrote:

I've noticed that about half-dozen people have uploaded small (~10 or 20)
logs ... When checking your WTW progress in the endorsement checker:
http://dwestbrook.net/projects/ham/070-checker/

There's no need to limit your log upload to contacts since July 1st ...
The checker automatically validates the date (and mode, too).

Also, uploading your whole PSK log gets you the added benefit of checking
against LONP and all the endorsements -- can see what you're close on, or
might even find one you didn't know you had completed!!

enjoy & GL!
--david
KJ4IZW









------------------------------------

Check out the 070 Club website at <http://www.podxs070.com/> for the
latest information on 070 Club activities.



Yahoo! Groups Links




Re: 13 Colonies Special Event

F.R. Ashley <gdadx2@...>
 

Rob,

Last night I heard all of the stations including the bonus station except for SC. The VA station was running PSK31. He was on 40 meters but I was unable to work him mainly due to poor operating practice of other hams. The deadline has been extended to July 7th.

73 Buddy WB4M
#1545

From: Rob Gibbs
Sent: Wednesday, July 04, 2012 8:31 AM
To: 070@yahoogroups.com
Subject: Re: [070] 13 Colonies Special Event



Still looking for B, I, J, L...can't find them anywhere

Rob
KD8HSV


Re: WTW progress checking

Dan Morris <dbm72941mo@...>
 

David - I'm assuming that if I submit my whole log or any portion of it that the checking program will catch the dupes that I submitted before, right??

Dan Morris KZ3T 070# 1065
dbm72941mo@roadrunner.com

On Jul 3, 2012, at 11:09 PM, David Westbrook wrote:

I've noticed that about half-dozen people have uploaded small (~10 or 20)
logs ... When checking your WTW progress in the endorsement checker:
http://dwestbrook.net/projects/ham/070-checker/

There's no need to limit your log upload to contacts since July 1st ...
The checker automatically validates the date (and mode, too).

Also, uploading your whole PSK log gets you the added benefit of checking
against LONP and all the endorsements -- can see what you're close on, or
might even find one you didn't know you had completed!!

enjoy & GL!
--david
KJ4IZW

[Non-text portions of this message have been removed]


Re: 13 Colonies Special Event

Joseph Miller <radiodxer2000@...>
 

Hi Rob.
 
K2B was opping PSK31 on 40 meters last night.
 
Don't worry, I am sure that all 4 will be active today. Some of stations have had WX conditions preventing them from wkg.
 
Good luck and Happy Fourth
 
73 de Joe KJ8O 1244


________________________________
From: Rob Gibbs <rag040@aol.com>
To: 070@yahoogroups.com
Sent: Wednesday, July 4, 2012 8:31 AM
Subject: Re: [070] 13 Colonies Special Event



 


Still looking for B, I, J, L...can't find them anywhere

Rob
KD8HSV
-----Original Message-----
From: Daniel Severance <mailto:daniel_severance%40yahoo.com>
To: 070 <mailto:070%40yahoogroups.com>
Sent: Tue, Jul 3, 2012 9:35 pm
Subject: Re: [070] 13 Colonies Special Event

Cool, hard to do as in past years participation of ops was kind of
spotty (2 years ago I was part of the CT group).  I forget but one of
the states was pretty rare that year...
Cheers,
Dan

________________________________
From: Chuck <mailto:k5evr%40satx.rr.com>
To: mailto:070%40yahoogroups.com
Sent: Tuesday, July 3, 2012 6:33 PM
Subject: [070] 13 Colonies Special Event

 
I just completed this years (clean sweep) getting all of the 13 plus
wm3pen. I was only able to get 5 last year...

Chuck, K5EVR
070 # 1305

[Non-text portions of this message have been removed]

------------------------------------

Check out the 070 Club website at <http://www.podxs070.com/> for the
latest information on 070 Club activities.

Yahoo! Groups Links




[Non-text portions of this message have been removed]


Re: 13 Colonies Special Event

Rob Gibbs <rag040@...>
 

Still looking for B, I, J, L...can't find them anywhere


Rob
KD8HSV

-----Original Message-----
From: Daniel Severance <daniel_severance@yahoo.com>
To: 070 <070@yahoogroups.com>
Sent: Tue, Jul 3, 2012 9:35 pm
Subject: Re: [070] 13 Colonies Special Event

Cool, hard to do as in past years participation of ops was kind of
spotty (2 years ago I was part of the CT group).  I forget but one of
the states was pretty rare that year...
Cheers,
Dan



________________________________
From: Chuck <k5evr@satx.rr.com>
To: 070@yahoogroups.com
Sent: Tuesday, July 3, 2012 6:33 PM
Subject: [070] 13 Colonies Special Event


 
I just completed this years (clean sweep) getting all of the 13 plus
wm3pen. I was only able to get 5 last year...

Chuck, K5EVR
070 # 1305




[Non-text portions of this message have been removed]



------------------------------------

Check out the 070 Club website at <http://www.podxs070.com/> for the
latest information on 070 Club activities.



Yahoo! Groups Links


WTW progress checking

David Westbrook
 

I've noticed that about half-dozen people have uploaded small (~10 or 20)
logs ... When checking your WTW progress in the endorsement checker:
http://dwestbrook.net/projects/ham/070-checker/

There's no need to limit your log upload to contacts since July 1st ...
The checker automatically validates the date (and mode, too).

Also, uploading your whole PSK log gets you the added benefit of checking
against LONP and all the endorsements -- can see what you're close on, or
might even find one you didn't know you had completed!!

enjoy & GL!
--david
KJ4IZW


Re: 160m

 

Yup.

----- Original Message -----
From: Daniel Severance
To: 070@yahoogroups.com
Sent: Tuesday, July 03, 2012 7:38 PM
Subject: Re: [070] 160m



surprised you don't hear each other - both are USB?
Cheers,
Dan
N6ERD
#558

________________________________
From: Milton Garb <n6mg@verizon.net>
To: 070@yahoogroups.com
Sent: Tuesday, July 3, 2012 7:32 PM
Subject: Re: [070] 160m



ok...I'll listen for you there.
Milt.

----- Original Message -----
From: radio@hollywoodtitle.com
To: 070@yahoogroups.com
Sent: Tuesday, July 03, 2012 7:31 PM
Subject: Re: [070] 160m

Nothing heard . I am going to try 1.838 now...

Sent from my iPhone

On Jul 3, 2012, at 7:21 PM, Daniel Severance <daniel_severance@yahoo.com> wrote:

> You guys are likely close enough to work ground wave :)
>
> I had to do QRZ to figure out where you were - didn't know the city.
>
> I've worked many a contest running the bands with friends who are close, doing 160M with the tuner screaming but if you are close you really don't need a proper antenna (and Chuck during the TDW before I got the 80M dipole modified to work as a T-hat).
>
> Will scramble to get all of the antennas fixed when I get back there on the 18th - all of the feedlines are dropped down into my hostas so it shouldn't take long. I have a line running out of my window so I can pull them back in (if I hadn't had a break in I probably would have left them running into the house but now...).
>
> Cheers,
> Dan
> N6ERD
> #558
>
> ________________________________
> From: Milton Garb <n6mg@verizon.net>
> To: 070@yahoogroups.com
> Sent: Tuesday, July 3, 2012 7:05 PM
> Subject: Re: [070] 160m
> W
> Gimme as minute.
> Milt.
> N6MG
>
> ----- Original Message -----
> From: <radio@hollywoodtitle.com>
> To: <070@yahoogroups.com>
> Sent: Tuesday, July 03, 2012 7:00 PM
> Subject: Re: [070] 160m
>
> > Hi Milt,
> >
> > Thanks for the reply. I am home now and will get on 1.807 now.
> >
> > 73 de Eric, KG6MZS
> >
> >
> > On Jul 3, 2012, at 4:02 PM, Milton Garb wrote:
> >
> >> Eric,
> >> Can we give it a try?
> >> Tell me when. My rotatable antenna for 160m should be able to make it
> >> from my valley to yours.
> >> 1.807 mHz ok with you?
> >> Milt.
> >> N6MG
> >>
> >> ----- Original Message -----
> >> From: Radio
> >> To: 070@yahoogroups.com
> >> Sent: Tuesday, July 03, 2012 10:23 AM
> >> Subject: [070] 160m
> >>
> >> Hello All,
> >>
> >> I finally got enough wire in the air to work 160m. Last night I [barely]
> >> made my first contact. This antenna is a limited time offer as it must
> >> come down when the XYL comes home at the end of the month.
> >>
> >> Anybody want to set a sked for 160?
> >>
> >> 73 de Eric, KG6MZS
> >>
> >> [Non-text portions of this message have been removed]
> >>
> >>
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
> >
> > Check out the 070 Club website at <http://www.podxs070.com/> for the
> > latest information on 070 Club activities.
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
>
> ------------------------------------
>
> Check out the 070 Club website at <http://www.podxs070.com/> for the latest information on 070 Club activities.
>
> Yahoo! Groups Links
>
> [Non-text portions of this message have been removed]
>
>

[Non-text portions of this message have been removed]



[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]


Re: 160m

Daniel Severance
 

surprised you don't hear each other - both are USB?
Cheers,
Dan
N6ERD
#558


________________________________
From: Milton Garb <n6mg@verizon.net>
To: 070@yahoogroups.com
Sent: Tuesday, July 3, 2012 7:32 PM
Subject: Re: [070] 160m


 
ok...I'll listen for you there.
Milt.

----- Original Message -----
From: radio@hollywoodtitle.com
To: 070@yahoogroups.com
Sent: Tuesday, July 03, 2012 7:31 PM
Subject: Re: [070] 160m

Nothing heard . I am going to try 1.838 now...

Sent from my iPhone

On Jul 3, 2012, at 7:21 PM, Daniel Severance <daniel_severance@yahoo.com> wrote:

You guys are likely close enough to work ground wave :)

I had to do QRZ to figure out where you were - didn't know the city.

I've worked many a contest running the bands with friends who are close, doing 160M with the tuner screaming but if you are close you really don't need a proper antenna (and Chuck during the TDW before I got the 80M dipole modified to work as a T-hat).

Will scramble to get all of the antennas fixed when I get back there on the 18th - all of the feedlines are dropped down into my hostas so it shouldn't take long. I have a line running out of my window so I can pull them back in (if I hadn't had a break in I probably would have left them running into the house but now...).

Cheers,
Dan
N6ERD
#558

________________________________
From: Milton Garb <n6mg@verizon.net>
To: 070@yahoogroups.com
Sent: Tuesday, July 3, 2012 7:05 PM
Subject: Re: [070] 160m
W
Gimme as minute.
Milt.
N6MG

----- Original Message -----
From: <radio@hollywoodtitle.com>
To: <070@yahoogroups.com>
Sent: Tuesday, July 03, 2012 7:00 PM
Subject: Re: [070] 160m

Hi Milt,

Thanks for the reply. I am home now and will get on 1.807 now.

73 de Eric, KG6MZS


On Jul 3, 2012, at 4:02 PM, Milton Garb wrote:

Eric,
Can we give it a try?
Tell me when. My rotatable antenna for 160m should be able to make it
from my valley to yours.
1.807 mHz ok with you?
Milt.
N6MG

----- Original Message -----
From: Radio
To: 070@yahoogroups.com
Sent: Tuesday, July 03, 2012 10:23 AM
Subject: [070] 160m

Hello All,

I finally got enough wire in the air to work 160m. Last night I [barely]
made my first contact. This antenna is a limited time offer as it must
come down when the XYL comes home at the end of the month.

Anybody want to set a sked for 160?

73 de Eric, KG6MZS









------------------------------------

Check out the 070 Club website at <http://www.podxs070.com/> for the
latest information on 070 Club activities.



Yahoo! Groups Links


------------------------------------

Check out the 070 Club website at <http://www.podxs070.com/> for the latest information on 070 Club activities.

Yahoo! Groups Links

[Non-text portions of this message have been removed]








[Non-text portions of this message have been removed]


Re: 160m

 

ok...I'll listen for you there.
Milt.

----- Original Message -----
From: radio@hollywoodtitle.com
To: 070@yahoogroups.com
Sent: Tuesday, July 03, 2012 7:31 PM
Subject: Re: [070] 160m



Nothing heard . I am going to try 1.838 now...

Sent from my iPhone

On Jul 3, 2012, at 7:21 PM, Daniel Severance <daniel_severance@yahoo.com> wrote:

> You guys are likely close enough to work ground wave :)
>
> I had to do QRZ to figure out where you were - didn't know the city.
>
> I've worked many a contest running the bands with friends who are close, doing 160M with the tuner screaming but if you are close you really don't need a proper antenna (and Chuck during the TDW before I got the 80M dipole modified to work as a T-hat).
>
> Will scramble to get all of the antennas fixed when I get back there on the 18th - all of the feedlines are dropped down into my hostas so it shouldn't take long. I have a line running out of my window so I can pull them back in (if I hadn't had a break in I probably would have left them running into the house but now...).
>
> Cheers,
> Dan
> N6ERD
> #558
>
> ________________________________
> From: Milton Garb <n6mg@verizon.net>
> To: 070@yahoogroups.com
> Sent: Tuesday, July 3, 2012 7:05 PM
> Subject: Re: [070] 160m
> W
> Gimme as minute.
> Milt.
> N6MG
>
> ----- Original Message -----
> From: <radio@hollywoodtitle.com>
> To: <070@yahoogroups.com>
> Sent: Tuesday, July 03, 2012 7:00 PM
> Subject: Re: [070] 160m
>
> > Hi Milt,
> >
> > Thanks for the reply. I am home now and will get on 1.807 now.
> >
> > 73 de Eric, KG6MZS
> >
> >
> > On Jul 3, 2012, at 4:02 PM, Milton Garb wrote:
> >
> >> Eric,
> >> Can we give it a try?
> >> Tell me when. My rotatable antenna for 160m should be able to make it
> >> from my valley to yours.
> >> 1.807 mHz ok with you?
> >> Milt.
> >> N6MG
> >>
> >> ----- Original Message -----
> >> From: Radio
> >> To: 070@yahoogroups.com
> >> Sent: Tuesday, July 03, 2012 10:23 AM
> >> Subject: [070] 160m
> >>
> >> Hello All,
> >>
> >> I finally got enough wire in the air to work 160m. Last night I [barely]
> >> made my first contact. This antenna is a limited time offer as it must
> >> come down when the XYL comes home at the end of the month.
> >>
> >> Anybody want to set a sked for 160?
> >>
> >> 73 de Eric, KG6MZS
> >>
> >>
> >>
> >>
> >
> >
> >
> >
> >
> >
> >
> > ------------------------------------
> >
> > Check out the 070 Club website at <http://www.podxs070.com/> for the
> > latest information on 070 Club activities.
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
>
> ------------------------------------
>
> Check out the 070 Club website at <http://www.podxs070.com/> for the latest information on 070 Club activities.
>
> Yahoo! Groups Links
>
>
>
>


Re: 160m

radio@hollywoodtitle.com <radio@...>
 

Nothing heard . I am going to try 1.838 now...

Sent from my iPhone

On Jul 3, 2012, at 7:21 PM, Daniel Severance <daniel_severance@yahoo.com> wrote:

You guys are likely close enough to work ground wave :)

I had to do QRZ to figure out where you were - didn't know the city.

I've worked many a contest running the bands with friends who are close, doing 160M with the tuner screaming but if you are close you really don't need a proper antenna (and Chuck during the TDW before I got the 80M dipole modified to work as a T-hat).

Will scramble to get all of the antennas fixed when I get back there on the 18th - all of the feedlines are dropped down into my hostas so it shouldn't take long. I have a line running out of my window so I can pull them back in (if I hadn't had a break in I probably would have left them running into the house but now...).

Cheers,
Dan
N6ERD
#558

________________________________
From: Milton Garb <n6mg@verizon.net>
To: 070@yahoogroups.com
Sent: Tuesday, July 3, 2012 7:05 PM
Subject: Re: [070] 160m
W
Gimme as minute.
Milt.
N6MG

----- Original Message -----
From: <radio@hollywoodtitle.com>
To: <070@yahoogroups.com>
Sent: Tuesday, July 03, 2012 7:00 PM
Subject: Re: [070] 160m

Hi Milt,

Thanks for the reply. I am home now and will get on 1.807 now.

73 de Eric, KG6MZS


On Jul 3, 2012, at 4:02 PM, Milton Garb wrote:

Eric,
Can we give it a try?
Tell me when. My rotatable antenna for 160m should be able to make it
from my valley to yours.
1.807 mHz ok with you?
Milt.
N6MG

----- Original Message -----
From: Radio
To: 070@yahoogroups.com
Sent: Tuesday, July 03, 2012 10:23 AM
Subject: [070] 160m

Hello All,

I finally got enough wire in the air to work 160m. Last night I [barely]
made my first contact. This antenna is a limited time offer as it must
come down when the XYL comes home at the end of the month.

Anybody want to set a sked for 160?

73 de Eric, KG6MZS

[Non-text portions of this message have been removed]



[Non-text portions of this message have been removed]



------------------------------------

Check out the 070 Club website at <http://www.podxs070.com/> for the
latest information on 070 Club activities.



Yahoo! Groups Links


------------------------------------

Check out the 070 Club website at <http://www.podxs070.com/> for the latest information on 070 Club activities.

Yahoo! Groups Links

[Non-text portions of this message have been removed]


[Non-text portions of this message have been removed]


Re: 160m

 

Eric,
Calling you on 1.807 mHz, +1000
Milt.
N6MG

----- Original Message -----
From: <radio@hollywoodtitle.com>
To: <070@yahoogroups.com>
Sent: Tuesday, July 03, 2012 7:00 PM
Subject: Re: [070] 160m


Hi Milt,

Thanks for the reply. I am home now and will get on 1.807 now.

73 de Eric, KG6MZS


On Jul 3, 2012, at 4:02 PM, Milton Garb wrote:

Eric,
Can we give it a try?
Tell me when. My rotatable antenna for 160m should be able to make it from my valley to yours.
1.807 mHz ok with you?
Milt.
N6MG

----- Original Message -----
From: Radio
To: 070@yahoogroups.com
Sent: Tuesday, July 03, 2012 10:23 AM
Subject: [070] 160m

Hello All,

I finally got enough wire in the air to work 160m. Last night I [barely] made my first contact. This antenna is a limited time offer as it must come down when the XYL comes home at the end of the month.

Anybody want to set a sked for 160?

73 de Eric, KG6MZS







------------------------------------

Check out the 070 Club website at <http://www.podxs070.com/> for the latest information on 070 Club activities.



Yahoo! Groups Links



Re: 160m

Daniel Severance
 

You guys are likely close enough to work ground wave :)

I had to do QRZ to figure out where you were - didn't know the city.

I've worked many a contest running the bands with friends who are close, doing 160M with the tuner screaming but if you are close you really don't need a proper antenna (and Chuck during the TDW before I got the 80M dipole modified to work as a T-hat).

Will scramble to get all of the antennas fixed when I get back there on the 18th - all of the feedlines are dropped down into my hostas so it shouldn't take long.  I have a line running out of my window so I can pull them back in (if I hadn't had a break in I probably would have left them running into the house but now...).

Cheers,
Dan
N6ERD
#558



________________________________
From: Milton Garb <n6mg@verizon.net>
To: 070@yahoogroups.com
Sent: Tuesday, July 3, 2012 7:05 PM
Subject: Re: [070] 160m
W
Gimme as minute.
Milt.
N6MG

----- Original Message -----
From: <radio@hollywoodtitle.com>
To: <070@yahoogroups.com>
Sent: Tuesday, July 03, 2012 7:00 PM
Subject: Re: [070] 160m


Hi Milt,

Thanks for the reply.  I am home now and will get on 1.807 now.

73 de Eric, KG6MZS


On Jul 3, 2012, at 4:02 PM, Milton Garb wrote:

Eric,
Can we give it a try?
Tell me when. My rotatable antenna for 160m should be able to make it
from my valley to yours.
1.807 mHz ok with you?
Milt.
N6MG

----- Original Message -----
From: Radio
To: 070@yahoogroups.com
Sent: Tuesday, July 03, 2012 10:23 AM
Subject: [070] 160m

Hello All,

I finally got enough wire in the air to work 160m. Last night I [barely]
made my first contact. This antenna is a limited time offer as it must
come down when the XYL comes home at the end of the month.

Anybody want to set a sked for 160?

73 de Eric, KG6MZS

[Non-text portions of this message have been removed]



[Non-text portions of this message have been removed]



------------------------------------

Check out the 070 Club website at <http://www.podxs070.com/> for the
latest information on 070 Club activities.



Yahoo! Groups Links




------------------------------------

Check out the 070 Club website at <http://www.podxs070.com/> for the latest information on 070 Club activities.



Yahoo! Groups Links



[Non-text portions of this message have been removed]