Date   

Re: Tips on how to work DX from a DX station

ljl2002@att.net
 

Steve,
 
Bravo!  Well said!
 
Any idea how many hours I've spent in the queue waiting for someone to give their life history and that of their operating career/weather/equipment?  It sure is frustrating on this end too especially when you see the band beginning to fade and you know that you are just not going to get your chance.
 
Thank you for humorously stating what should be the obvious.
 
Joe
KA1PPV #1482

--- On Mon, 4/23/12, melachri <w3hf@arrl.net> wrote:


From: melachri <w3hf@arrl.net>
Subject: [070] Tips on how to work DX from a DX station
To: 070@yahoogroups.com
Date: Monday, April 23, 2012, 8:42 AM



 



After a week of being semi-rare DX, I offer the following suggestions, with tongue firmly planted in cheek.

1. When you are responding to my CQ, repeat MY callsign at least 2 or 3 times, so I know you're responding to me.

2. If I respond to someone else, go ahead and call me again, because I probably didn't hear you correctly and surely I MEANT to call YOU.

3. Feel free to give me your name, QTH and signal report when you first call me, instead of waiting to see if I respond to you. After all, it might save YOU a few seconds; it doesn't matter if you waste my time or QRM other stations.

4. When I give you a quick signal report only, make sure you use your regular "response" macro that welcomes me to your screen, tells me all your QTH details (like your county), your equipment information (OS version, how much RAM in your computer, what microphone and headset you use), and your license history. After all, I probably want to know all that even if I just want a short QSO.

5. Ignore me if I ask you to work split. That's really so everyone ELSE will get out of YOUR way.

6. You can also ignore me if I ask you to repeat just your callsign. Just use your 3x3 macro.

7. When the QSO is over, please use your usual macro that not only thanks me but hopes to see me again, wishes me good luck and good DX, and sends greetings to my family, my cats, my neighbors and the mailman. After all, courtesy is important.

8. Don't forget to tell me YOUR QSL policy, because I will surely want YOUR card.

9. Once I say 73 to you and move on to another CQ or QRZ?, make sure you send your own 73, bye bye, and greetings to me. I really want to hear that, not the next guy calling me.

Seriously, all these things happened to me at least once this week. And it's frustrating as can be when my objective is to put as many callsigns in my log as I can. So here's the real list:

1. Don't use your regular ragchewing macros to work a DXpedition. What, you don't have any others? Either make some, or skip the macros completely.

2. Emphasize using your own call, not the DX station's. He already knows his call; he needs to hear yours.

3. Don't give him more info than he gives you. If he wants a quickie QSO, oblige him. If you don't like quickie QSOs, then skip it completely instead of forcing your protocols on him. Or wait until you find a DX station that WANTS to ragchew.

4. Once he moves on, don't transmit any more UNLESS he logged you incorrectly.

5. Follow his instructions. Exactly, to the best of your ability. Because he'll expect you to if you want to get in his log.

Steve
W3HF/KH2 (for 6 more days)








[Non-text portions of this message have been removed]


WA3WSJ: New Kindle Bookstore and thanks!

Edward R Breneiser <breneiser@...>
 

Hello all,

I would like to thank all the testers who looked at my Kindle Book entitled,
"Amateur Radio and the Great Outdoors." It looks like the book is fine for
Kindles and a few other readers etc. Due to all the emails requesting a
Kindle version, I have opened the WA3WSJ Kindle Bookstore. If you want to
visit the store, just click the link - thanks.

I hope you enjoy the books!

http://www.wa3wsj.org/WA3WSJ-Kindle-Book-Store.html

73,
Ed, WA3WSJ


Re: Tips on how to work DX from a DX station

 

#3 is certainly a pet peeve of mine. What's so difficult about waiting for a station, (DX or not) to acknowledge your call BEFORE you come back with your exchange?
Milt.
N6MG

----- Original Message -----
From: melachri
To: 070@yahoogroups.com
Sent: Monday, April 23, 2012 5:42 AM
Subject: [070] Tips on how to work DX from a DX station



After a week of being semi-rare DX, I offer the following suggestions, with tongue firmly planted in cheek.

1. When you are responding to my CQ, repeat MY callsign at least 2 or 3 times, so I know you're responding to me.

2. If I respond to someone else, go ahead and call me again, because I probably didn't hear you correctly and surely I MEANT to call YOU.

3. Feel free to give me your name, QTH and signal report when you first call me, instead of waiting to see if I respond to you. After all, it might save YOU a few seconds; it doesn't matter if you waste my time or QRM other stations.

4. When I give you a quick signal report only, make sure you use your regular "response" macro that welcomes me to your screen, tells me all your QTH details (like your county), your equipment information (OS version, how much RAM in your computer, what microphone and headset you use), and your license history. After all, I probably want to know all that even if I just want a short QSO.

5. Ignore me if I ask you to work split. That's really so everyone ELSE will get out of YOUR way.

6. You can also ignore me if I ask you to repeat just your callsign. Just use your 3x3 macro.

7. When the QSO is over, please use your usual macro that not only thanks me but hopes to see me again, wishes me good luck and good DX, and sends greetings to my family, my cats, my neighbors and the mailman. After all, courtesy is important.

8. Don't forget to tell me YOUR QSL policy, because I will surely want YOUR card.

9. Once I say 73 to you and move on to another CQ or QRZ?, make sure you send your own 73, bye bye, and greetings to me. I really want to hear that, not the next guy calling me.

Seriously, all these things happened to me at least once this week. And it's frustrating as can be when my objective is to put as many callsigns in my log as I can. So here's the real list:

1. Don't use your regular ragchewing macros to work a DXpedition. What, you don't have any others? Either make some, or skip the macros completely.

2. Emphasize using your own call, not the DX station's. He already knows his call; he needs to hear yours.

3. Don't give him more info than he gives you. If he wants a quickie QSO, oblige him. If you don't like quickie QSOs, then skip it completely instead of forcing your protocols on him. Or wait until you find a DX station that WANTS to ragchew.

4. Once he moves on, don't transmit any more UNLESS he logged you incorrectly.

5. Follow his instructions. Exactly, to the best of your ability. Because he'll expect you to if you want to get in his log.

Steve
W3HF/KH2 (for 6 more days)


Re: Tips on how to work DX from a DX station

 

----- Original Message -----
From: melachri
To: 070@yahoogroups.com
Sent: Monday, April 23, 2012 5:42 AM
Subject: [070] Tips on how to work DX from a DX station



After a week of being semi-rare DX, I offer the following suggestions, with tongue firmly planted in cheek.

1. When you are responding to my CQ, repeat MY callsign at least 2 or 3 times, so I know you're responding to me.

2. If I respond to someone else, go ahead and call me again, because I probably didn't hear you correctly and surely I MEANT to call YOU.

3. Feel free to give me your name, QTH and signal report when you first call me, instead of waiting to see if I respond to you. After all, it might save YOU a few seconds; it doesn't matter if you waste my time or QRM other stations.

4. When I give you a quick signal report only, make sure you use your regular "response" macro that welcomes me to your screen, tells me all your QTH details (like your county), your equipment information (OS version, how much RAM in your computer, what microphone and headset you use), and your license history. After all, I probably want to know all that even if I just want a short QSO.

5. Ignore me if I ask you to work split. That's really so everyone ELSE will get out of YOUR way.

6. You can also ignore me if I ask you to repeat just your callsign. Just use your 3x3 macro.

7. When the QSO is over, please use your usual macro that not only thanks me but hopes to see me again, wishes me good luck and good DX, and sends greetings to my family, my cats, my neighbors and the mailman. After all, courtesy is important.

8. Don't forget to tell me YOUR QSL policy, because I will surely want YOUR card.

9. Once I say 73 to you and move on to another CQ or QRZ?, make sure you send your own 73, bye bye, and greetings to me. I really want to hear that, not the next guy calling me.

Seriously, all these things happened to me at least once this week. And it's frustrating as can be when my objective is to put as many callsigns in my log as I can. So here's the real list:

1. Don't use your regular ragchewing macros to work a DXpedition. What, you don't have any others? Either make some, or skip the macros completely.

2. Emphasize using your own call, not the DX station's. He already knows his call; he needs to hear yours.

3. Don't give him more info than he gives you. If he wants a quickie QSO, oblige him. If you don't like quickie QSOs, then skip it completely instead of forcing your protocols on him. Or wait until you find a DX station that WANTS to ragchew.

4. Once he moves on, don't transmit any more UNLESS he logged you incorrectly.

5. Follow his instructions. Exactly, to the best of your ability. Because he'll expect you to if you want to get in his log.

Steve
W3HF/KH2 (for 6 more days)


Re: Tips on how to work DX from a DX station

Jim K5SP
 

Wish I had said that!

I spent a year on Diego Garcia, operating as WB6EWH/VQ9, and have been on the
other end of DX pileups. Occasionally I would get so frustrated that I would
just walk away from the rig.


One time, because the roar of callsigns coming out of the speaker (I could not
determine a single callsign), I got up, went and got a cup of coffee, came back
to the rig, and the roar was still going. Repeated requests on how to speed up
the contact rate were ignored. There were some hams in the U.S. that I just
would not work because of their rude, aggressive behavior.

What was neat for me was an afternoon get-together of stations in Pago-Pago,
Diego Garcia, Guam, Northwest Cape, and occasionally some other rare dx for a
rag chew net among us.


Please be courteous, listen to the dx station, and follow HIS rules. Unless you
have been on the other end, you have no concept of how difficult it is to work
pileups when no one listens to your requests.

Just my .02

Jim, K5SP





________________________________
From: melachri <w3hf@arrl.net>
To: 070@yahoogroups.com
Sent: Mon, April 23, 2012 7:42:19 AM
Subject: [070] Tips on how to work DX from a DX station


After a week of being semi-rare DX, I offer the following suggestions, with
tongue firmly planted in cheek.

1. When you are responding to my CQ, repeat MY callsign at least 2 or 3 times,
so I know you're responding to me.

2. If I respond to someone else, go ahead and call me again, because I probably
didn't hear you correctly and surely I MEANT to call YOU.

3. Feel free to give me your name, QTH and signal report when you first call me,
instead of waiting to see if I respond to you. After all, it might save YOU a
few seconds; it doesn't matter if you waste my time or QRM other stations.

4. When I give you a quick signal report only, make sure you use your regular
"response" macro that welcomes me to your screen, tells me all your QTH details
(like your county), your equipment information (OS version, how much RAM in your
computer, what microphone and headset you use), and your license history. After
all, I probably want to know all that even if I just want a short QSO.

5. Ignore me if I ask you to work split. That's really so everyone ELSE will get
out of YOUR way.

6. You can also ignore me if I ask you to repeat just your callsign. Just use
your 3x3 macro.

7. When the QSO is over, please use your usual macro that not only thanks me but
hopes to see me again, wishes me good luck and good DX, and sends greetings to
my family, my cats, my neighbors and the mailman. After all, courtesy is
important.

8. Don't forget to tell me YOUR QSL policy, because I will surely want YOUR
card.

9. Once I say 73 to you and move on to another CQ or QRZ?, make sure you send
your own 73, bye bye, and greetings to me. I really want to hear that, not the
next guy calling me.

Seriously, all these things happened to me at least once this week. And it's
frustrating as can be when my objective is to put as many callsigns in my log as
I can. So here's the real list:

1. Don't use your regular ragchewing macros to work a DXpedition. What, you
don't have any others? Either make some, or skip the macros completely.

2. Emphasize using your own call, not the DX station's. He already knows his
call; he needs to hear yours.

3. Don't give him more info than he gives you. If he wants a quickie QSO, oblige
him. If you don't like quickie QSOs, then skip it completely instead of forcing
your protocols on him. Or wait until you find a DX station that WANTS to
ragchew.

4. Once he moves on, don't transmit any more UNLESS he logged you incorrectly.

5. Follow his instructions. Exactly, to the best of your ability. Because he'll
expect you to if you want to get in his log.

Steve
W3HF/KH2 (for 6 more days)




[Non-text portions of this message have been removed]


Re: Tips on how to work DX from a DX station

M. Schiefelbein
 

It seems like it would good practice for anyone who's a regular on PSK to have two macros preprogrammed. (I'm using the DM780 format for these, but it should be easy to translate to other programs)

1. Answer the DX:
<his:callsign> de <my:callsign> <my:callsign> <my:callsign> k<stop>
or even just
de <my:callsign> <my:callsign> <my:callsign> k<stop>

2. Give a report and get out of the way:
<his:callsign> 599 599 TU 73 de <my:callsign> SK<add-log><stop>

Two macros, and you've answered the DX, given him a report, wished him well, and added the QSO to your log, all in the space of 60 seconds. Even if you don't normally chase DX, if someday you see Bhutan CQing on the waterfall and decide to give them a call, you'll be ready. And you won't have to frantically type by hand or subject the rest of us in the pileup (and the DX) to your normal macro with city/state, grid square, etc.

--mark/K0ABC

--- On Mon, 4/23/12, melachri <w3hf@arrl.net> wrote:

From: melachri <w3hf@arrl.net>
Subject: [070] Tips on how to work DX from a DX station
To: 070@yahoogroups.com
Date: Monday, April 23, 2012, 7:42 AM
















 









After a week of being semi-rare DX, I offer the following suggestions, with tongue firmly planted in cheek.



1. When you are responding to my CQ, repeat MY callsign at least 2 or 3 times, so I know you're responding to me.



2. If I respond to someone else, go ahead and call me again, because I probably didn't hear you correctly and surely I MEANT to call YOU.



3. Feel free to give me your name, QTH and signal report when you first call me, instead of waiting to see if I respond to you. After all, it might save YOU a few seconds; it doesn't matter if you waste my time or QRM other stations.



4. When I give you a quick signal report only, make sure you use your regular "response" macro that welcomes me to your screen, tells me all your QTH details (like your county), your equipment information (OS version, how much RAM in your computer, what microphone and headset you use), and your license history. After all, I probably want to know all that even if I just want a short QSO.



5. Ignore me if I ask you to work split. That's really so everyone ELSE will get out of YOUR way.



6. You can also ignore me if I ask you to repeat just your callsign. Just use your 3x3 macro.



7. When the QSO is over, please use your usual macro that not only thanks me but hopes to see me again, wishes me good luck and good DX, and sends greetings to my family, my cats, my neighbors and the mailman. After all, courtesy is important.



8. Don't forget to tell me YOUR QSL policy, because I will surely want YOUR card.



9. Once I say 73 to you and move on to another CQ or QRZ?, make sure you send your own 73, bye bye, and greetings to me. I really want to hear that, not the next guy calling me.



Seriously, all these things happened to me at least once this week. And it's frustrating as can be when my objective is to put as many callsigns in my log as I can. So here's the real list:



1. Don't use your regular ragchewing macros to work a DXpedition. What, you don't have any others? Either make some, or skip the macros completely.



2. Emphasize using your own call, not the DX station's. He already knows his call; he needs to hear yours.



3. Don't give him more info than he gives you. If he wants a quickie QSO, oblige him. If you don't like quickie QSOs, then skip it completely instead of forcing your protocols on him. Or wait until you find a DX station that WANTS to ragchew.



4. Once he moves on, don't transmit any more UNLESS he logged you incorrectly.



5. Follow his instructions. Exactly, to the best of your ability. Because he'll expect you to if you want to get in his log.



Steve

W3HF/KH2 (for 6 more days)



























[Non-text portions of this message have been removed]


Re: Tips on how to work DX from a DX station

Charlie Trice, K8IJ <ctrice@...>
 

I didn't know you had cats, OM Steve!


Vy 73,

Charlie, K8IJ

----- Original Message -----
From: "melachri" <w3hf@arrl.net>
To: 070@yahoogroups.com
Sent: Monday, April 23, 2012 8:42:19 AM
Subject: [070] Tips on how to work DX from a DX station






After a week of being semi-rare DX, I offer the following suggestions, with tongue firmly planted in cheek.

1. When you are responding to my CQ, repeat MY callsign at least 2 or 3 times, so I know you're responding to me.

2. If I respond to someone else, go ahead and call me again, because I probably didn't hear you correctly and surely I MEANT to call YOU.

3. Feel free to give me your name, QTH and signal report when you first call me, instead of waiting to see if I respond to you. After all, it might save YOU a few seconds; it doesn't matter if you waste my time or QRM other stations.

4. When I give you a quick signal report only, make sure you use your regular "response" macro that welcomes me to your screen, tells me all your QTH details (like your county), your equipment information (OS version, how much RAM in your computer, what microphone and headset you use), and your license history. After all, I probably want to know all that even if I just want a short QSO.

5. Ignore me if I ask you to work split. That's really so everyone ELSE will get out of YOUR way.

6. You can also ignore me if I ask you to repeat just your callsign. Just use your 3x3 macro.

7. When the QSO is over, please use your usual macro that not only thanks me but hopes to see me again, wishes me good luck and good DX, and sends greetings to my family, my cats, my neighbors and the mailman. After all, courtesy is important.

8. Don't forget to tell me YOUR QSL policy, because I will surely want YOUR card.

9. Once I say 73 to you and move on to another CQ or QRZ?, make sure you send your own 73, bye bye, and greetings to me. I really want to hear that, not the next guy calling me.

Seriously, all these things happened to me at least once this week. And it's frustrating as can be when my objective is to put as many callsigns in my log as I can. So here's the real list:

1. Don't use your regular ragchewing macros to work a DXpedition. What, you don't have any others? Either make some, or skip the macros completely.

2. Emphasize using your own call, not the DX station's. He already knows his call; he needs to hear yours.

3. Don't give him more info than he gives you. If he wants a quickie QSO, oblige him. If you don't like quickie QSOs, then skip it completely instead of forcing your protocols on him. Or wait until you find a DX station that WANTS to ragchew.

4. Once he moves on, don't transmit any more UNLESS he logged you incorrectly.

5. Follow his instructions. Exactly, to the best of your ability. Because he'll expect you to if you want to get in his log.

Steve
W3HF/KH2 (for 6 more days)




[Non-text portions of this message have been removed]


Re: Tips on how to work DX from a DX station

Patrick Weatherford <patricknw@...>
 

Steve,

I was amused to read this first thing this morning. You could also call
this the "Tips on how to work stations in a contest" as the same thing
happens there.

I distinctly remember working a contest a while back and I gave the
other guy a quick "599 AR" report.... I had a big pileup going. He
responds with a macro that lasted a solid EIGHT MINUTES about his
keyboard being "horizontally polarized" and about having a 19 inch LCD
monitor, 8 gigs of RAM, and a TB hard drive with 20% of the space used.
Very frustrating.

The best part is point #1.... I see stations give MY call sign three,
four, even five times, and theirs only once. I often respond with "yes,
I know my own callsign."

Have fun out there in KH2. It's on my bucket list!

Patrick
AE5PW

On 4/23/2012 7:42 AM, melachri wrote:

After a week of being semi-rare DX, I offer the following suggestions,
with tongue firmly planted in cheek.

1. When you are responding to my CQ, repeat MY callsign at least 2 or
3 times, so I know you're responding to me.

2. If I respond to someone else, go ahead and call me again, because I
probably didn't hear you correctly and surely I MEANT to call YOU.

3. Feel free to give me your name, QTH and signal report when you
first call me, instead of waiting to see if I respond to you. After
all, it might save YOU a few seconds; it doesn't matter if you waste
my time or QRM other stations.

4. When I give you a quick signal report only, make sure you use your
regular "response" macro that welcomes me to your screen, tells me all
your QTH details (like your county), your equipment information (OS
version, how much RAM in your computer, what microphone and headset
you use), and your license history. After all, I probably want to know
all that even if I just want a short QSO.

5. Ignore me if I ask you to work split. That's really so everyone
ELSE will get out of YOUR way.

6. You can also ignore me if I ask you to repeat just your callsign.
Just use your 3x3 macro.

7. When the QSO is over, please use your usual macro that not only
thanks me but hopes to see me again, wishes me good luck and good DX,
and sends greetings to my family, my cats, my neighbors and the
mailman. After all, courtesy is important.

8. Don't forget to tell me YOUR QSL policy, because I will surely want
YOUR card.

9. Once I say 73 to you and move on to another CQ or QRZ?, make sure
you send your own 73, bye bye, and greetings to me. I really want to
hear that, not the next guy calling me.

Seriously, all these things happened to me at least once this week.
And it's frustrating as can be when my objective is to put as many
callsigns in my log as I can. So here's the real list:

1. Don't use your regular ragchewing macros to work a DXpedition.
What, you don't have any others? Either make some, or skip the macros
completely.

2. Emphasize using your own call, not the DX station's. He already
knows his call; he needs to hear yours.

3. Don't give him more info than he gives you. If he wants a quickie
QSO, oblige him. If you don't like quickie QSOs, then skip it
completely instead of forcing your protocols on him. Or wait until you
find a DX station that WANTS to ragchew.

4. Once he moves on, don't transmit any more UNLESS he logged you
incorrectly.

5. Follow his instructions. Exactly, to the best of your ability.
Because he'll expect you to if you want to get in his log.

Steve
W3HF/KH2 (for 6 more days)


Tips on how to work DX from a DX station

Steve W3HF
 

After a week of being semi-rare DX, I offer the following suggestions, with tongue firmly planted in cheek.

1. When you are responding to my CQ, repeat MY callsign at least 2 or 3 times, so I know you're responding to me.

2. If I respond to someone else, go ahead and call me again, because I probably didn't hear you correctly and surely I MEANT to call YOU.

3. Feel free to give me your name, QTH and signal report when you first call me, instead of waiting to see if I respond to you. After all, it might save YOU a few seconds; it doesn't matter if you waste my time or QRM other stations.

4. When I give you a quick signal report only, make sure you use your regular "response" macro that welcomes me to your screen, tells me all your QTH details (like your county), your equipment information (OS version, how much RAM in your computer, what microphone and headset you use), and your license history. After all, I probably want to know all that even if I just want a short QSO.

5. Ignore me if I ask you to work split. That's really so everyone ELSE will get out of YOUR way.

6. You can also ignore me if I ask you to repeat just your callsign. Just use your 3x3 macro.

7. When the QSO is over, please use your usual macro that not only thanks me but hopes to see me again, wishes me good luck and good DX, and sends greetings to my family, my cats, my neighbors and the mailman. After all, courtesy is important.

8. Don't forget to tell me YOUR QSL policy, because I will surely want YOUR card.

9. Once I say 73 to you and move on to another CQ or QRZ?, make sure you send your own 73, bye bye, and greetings to me. I really want to hear that, not the next guy calling me.

Seriously, all these things happened to me at least once this week. And it's frustrating as can be when my objective is to put as many callsigns in my log as I can. So here's the real list:

1. Don't use your regular ragchewing macros to work a DXpedition. What, you don't have any others? Either make some, or skip the macros completely.

2. Emphasize using your own call, not the DX station's. He already knows his call; he needs to hear yours.

3. Don't give him more info than he gives you. If he wants a quickie QSO, oblige him. If you don't like quickie QSOs, then skip it completely instead of forcing your protocols on him. Or wait until you find a DX station that WANTS to ragchew.

4. Once he moves on, don't transmit any more UNLESS he logged you incorrectly.

5. Follow his instructions. Exactly, to the best of your ability. Because he'll expect you to if you want to get in his log.

Steve
W3HF/KH2 (for 6 more days)


Re: W3HF/KH2 QRT for the night

ljl2002@att.net
 

Steve,
 
I barely saw your trace with a spoty callsign in there but not enough to make contact.  I called a couple of times but no luck.
 
Thanks for making such an effort.
 
73
Joe
KA1PPV  #1482

--- On Sun, 4/22/12, melachri <w3hf@arrl.net> wrote:


From: melachri <w3hf@arrl.net>
Subject: [070] W3HF/KH2 QRT for the night
To: 070@yahoogroups.com
Date: Sunday, April 22, 2012, 9:59 AM



 



It's midnight, I have a 20-minute drive to my hotel now, and I have to be at work at 6:30 tomorrow. So it's time to shut down for the night.

Thank to all who worked me; sorry to those who couldn't hear me. I still have 6 more days on the island, so I hope there will be more opportunities for all.

Steve
W3HF/KH2








[Non-text portions of this message have been removed]


W3HF/KH2 QRT for the night

Steve W3HF
 

It's midnight, I have a 20-minute drive to my hotel now, and I have to be at work at 6:30 tomorrow. So it's time to shut down for the night.

Thank to all who worked me; sorry to those who couldn't hear me. I still have 6 more days on the island, so I hope there will be more opportunities for all.

Steve
W3HF/KH2


20m

Steve W3HF
 

So does anyone else see that station calling me? Am I the only one that can't decode him?

Steve
W3HF/KH2


Re: DX on 20m

Steve W3HF
 

I'm still there, and seeing stations from all over. Wacky to work a KB5 followed by a BD1 without moving the antenna.


I just wish I could decode the station that keeps calling me. He's calling me a little high (~40 Hz or so) and I just can't decode him. His signal is coming in distorted.


I'm just below 14072 if anyone wants to try again.


Steve


DX on 20m

ljl2002@att.net
 

Earlier this morning (11:35 UTC) FR5MV Reunion Island was on 14071.8 khz calling CQ.(PSK31)

Also Steve, W3HF/KH2 was on 20m PSK as well at the same time. Unfortunately I couldn't see him at this QTH. All I saw was everybody and his brother working him!

There was some DX from Down Under too. VK5NE from Salisbury Australia.
He was working PSK31 on various parts of the 20m band for the past hour.(14.070 - 14.072 khz) (11:54 UTC). I logged him using 1.5W so give him a call.


W3HF/KH2 on 20m

John van Eijndt KC0DEB
 

I think I called you a little to early, Steve. You were clobbered by someones splatter when I called., now you are getting stronger by the minute and abt 90% print . Nevertheless, thank you very much for the contact ! Enjoy your time on KH2, and have a save trip home.

73 John KC0DEB #069


Re: W3HF/KH2 on 20m

Steve W3HF
 

Actually, Danny's page (KH2JU) has the right map to his QTH.


Steve

On 04/22/12, boat.anchor<boat.anchor@yahoo.ca> wrote:

Steve
Found it from their website.
Their QRZ listing puts them out in the shark infested blue water.
Have a great time.
Barry
VA7GEM


Re: W3HF/KH2 on 20m

Steve W3HF
 

Yes, but now only JAs and CO2IZ are calling

On 04/22/12, Scott Long<k8sm@windstream.net> wrote:

Steve,

Are you still QRV?



Scott, K8SM

#860



_____

From: 070@yahoogroups.com [mailto:070@yahoogroups.com] On Behalf Of Stephen
Melachrinos
Sent: Sunday, April 22, 2012 7:30 AM
To: 070@yahoogroups.com
Subject: Re: [070] Re: W3HF/KH2 on 20m





Only one grid in Guam, QK23.

But easier to look up my host: WH2DX. (Check out the photos of his station.)

Steve
W3HF/KH2

-----------------------


On 04/22/12, boat.anchor<boat.anchor@yahoo.ca
<mailto:boat.anchor%40yahoo.ca> > wrote:

Steve
TVM
Where are you in Guam so I can look up ur grid loc.
Best regards
Barry
VA7GEM









------------------------------------

Check out the 070 Club website at <http://www.podxs070.com/> for the latest information on 070 Club activities.



Yahoo! Groups Links


Re: W3HF/KH2 on 20m

boat.anchor <boat.anchor@...>
 

Steve
Found it from their website.
Their QRZ listing puts them out in the shark infested blue water.
Have a great time.
Barry
VA7GEM

--- In 070@yahoogroups.com, "boat.anchor" <boat.anchor@...> wrote:

Steve
TVM
I like to log grid loc as I look them up in detail when things are slow in the shack.
Barry
VA7GEM


--- In 070@yahoogroups.com, Stephen Melachrinos <w3hf@> wrote:

Only one grid in Guam, QK23.


But easier to look up my host: WH2DX. (Check out the photos of his station.)


Steve
W3HF/KH2


-----------------------


On 04/22/12, boat.anchor<boat.anchor@> wrote:

Steve
TVM
Where are you in Guam so I can look up ur grid loc.
Best regards
Barry
VA7GEM


Re: W3HF/KH2 on 20m

Scott Long
 

Steve,

Are you still QRV?



Scott, K8SM

#860



_____

From: 070@yahoogroups.com [mailto:070@yahoogroups.com] On Behalf Of Stephen
Melachrinos
Sent: Sunday, April 22, 2012 7:30 AM
To: 070@yahoogroups.com
Subject: Re: [070] Re: W3HF/KH2 on 20m





Only one grid in Guam, QK23.

But easier to look up my host: WH2DX. (Check out the photos of his station.)

Steve
W3HF/KH2

-----------------------

On 04/22/12, boat.anchor<boat.anchor@yahoo.ca
<mailto:boat.anchor%40yahoo.ca> > wrote:

Steve
TVM
Where are you in Guam so I can look up ur grid loc.
Best regards
Barry
VA7GEM


Re: W3HF/KH2 on 20m

boat.anchor <boat.anchor@...>
 

Steve
TVM
I like to log grid loc as I look them up in detail when things are slow in the shack.
Barry
VA7GEM

--- In 070@yahoogroups.com, Stephen Melachrinos <w3hf@...> wrote:

Only one grid in Guam, QK23.


But easier to look up my host: WH2DX. (Check out the photos of his station.)


Steve
W3HF/KH2


-----------------------


On 04/22/12, boat.anchor<boat.anchor@...> wrote:

Steve
TVM
Where are you in Guam so I can look up ur grid loc.
Best regards
Barry
VA7GEM